Related references
Note: Only part of the references are listed.
Article
Environmental Sciences
J. Lin et al.
Summary: The pyrolysis of pine saw dust at varying temperatures affects the characteristics and potential uses of the resulting bio-gas, bio-oil, and bio-char. Higher pyrolysis temperatures lead to increased bio-gas yield, decreased bio-char yield, and relatively stable bio-oil yield. The bio-gas exhibits high combustible gas content and heating value at higher temperatures, while the main identified compounds in bio-oil offer potential applications in various industries.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY
(2022)
Review
Environmental Sciences
Sibudjing Kawi et al.
Summary: Biomass gasification is a crucial method for energy utilization, in which synthesis gas is generated as the primary product for various applications. Efforts have been made to develop efficient and cost-effective catalysts for tar conversion, with a focus on natural minerals and waste-derived catalysts to enhance process sustainability.
WASTE AND BIOMASS VALORIZATION
(2022)
Article
Agronomy
Zeng Zhang-Quan et al.
Summary: By investigating biomass distribution and succession in different forest types, it was found that tree biomass increases with forest succession, while the proportion of trunk biomass decreases and root biomass proportion increases. In addition, the increase in tree species diversity has a positive impact on tree biomass.
Article
Energy & Fuels
Laura Santamaria et al.
Summary: Fluidized bed fast pyrolysis of wood pellets and solid recovered fuel pellets was conducted to analyze the influence of reactor temperature and fuel type on product distribution. The study revealed that fuel characteristics significantly affected the composition and yield of gases, char, and tar, providing insights for deriving pyrolysis sub-models for fluidized bed gasification modeling.
Article
Energy & Fuels
Rima A. Aljeradat et al.
Summary: This study investigated the catalytic effect of Jordanian minerals on the pyrolysis of date kernels, showing that different minerals had varying impacts on the bio-oil yield and quality. Oil shale ash produced the highest bio-oil yield, while zeolitic tuff produced the highest gas yield. The chemical composition of bio-oil was altered by the investigated catalysts, with zeolitic tuff showing the best properties in terms of acidity and stability.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS
(2021)
Review
Chemistry, Physical
Antonio Zuorro et al.
Summary: Microalgal biomass has gained importance in various industries due to its rapid growth and high carbon-fixing efficiency. Thermochemical processes are effective in obtaining biofuels, but direct conversion results in high heteroatom content, leading to the emergence of catalyst-based solutions for increased biocrude production. This paper aims to review recent developments in catalyst-mediated conversion of algal biomass, focusing on optimal yield of algal-based biofuels through pyrolysis and HTL.
Article
Agricultural Engineering
Jung-Hun Kim et al.
Summary: The study found that CO2 can enhance the production of syngas during biomass pyrolysis through gas phase reactions, especially for lignin-rich biomass. The use of Co and Ni catalysts significantly increased the formation of syngas.
BIORESOURCE TECHNOLOGY
(2021)
Review
Energy & Fuels
Hesameddin Fatehi et al.
Summary: Biomass is a renewable energy source that can be converted to various products. Thermochemical conversion is the most efficient method, capable of producing gas or liquid fuels, and heat and electricity. Research in biomass thermochemical conversion is actively growing, with new experimental methods and numerical modeling being introduced.
Article
Environmental Sciences
Chanyeong Park et al.
Summary: The study investigated the co-pyrolysis of food waste with lignocellulosic biomass and found that temperature and the ratio of food waste to wood bark had significant effects on product yields, with nitrogen flow rate having a minor impact. Co-pyrolysis at higher temperatures resulted in more non-condensable gases and less char. By combining food waste and wood bark at a 1:1 ratio at 700°C, the highest hydrogen gas yield and the most significant suppression of harmful compound formation were achieved. The study demonstrates the potential of co-pyrolysis for valorizing biowaste and reducing the formation of harmful chemicals.
ENVIRONMENTAL POLLUTION
(2021)
Article
Chemistry, Applied
Kai Xu et al.
Summary: Revealing the pyrolysis reaction pathway related to coal structure evolution under different temperatures is crucial for industry. The study found that reactions between aromatic nucleus and methyl radicals, condensation reaction, and transformation of aliphatic hydrocarbons into light hydrocarbon gas compounds are key processes in coal structure evolution.
FUEL PROCESSING TECHNOLOGY
(2021)
Article
Chemistry, Physical
Emmanuel Galiwango et al.
Summary: The direct catalytic depolymerization of date palm biomass for production of high-value chemicals heavily depends on optimization of different parameters and method of conversion. The use of a commercial alloy catalyst led to better liquid yields compared to laboratory-prepared transition metal phosphide catalysts, resulting in significant improvements in product yield. The study provides insights into the role of various process parameters and the potential of date palm waste as a lignocellulosic feedstock for high-value chemical production.
Article
Materials Science, Paper & Wood
Seong-Heon Cho et al.
Summary: This study focused on the valorization of sesame seed waste into syngas by pyrolysis with added CO2 as a co-reactant, resulting in enhanced production of CO due to gas phase reactions. Catalytic pyrolysis using a mesoporous nickel-based catalyst further increased syngas production proportionately to temperature and catalyst loadings, independent of H-2 formation. The findings indicate that CO2-assisted catalytic pyrolysis significantly improved H-2 and CO formations from cellulosic biomass waste, controlling CO concentration effectively.
Review
Chemistry, Multidisciplinary
Aravind Suresh et al.
Summary: Growing concerns over climate change have led to the search for renewable energies to mitigate the adverse impacts of excessive use of fossil fuels. Pyrolysis, particularly microwave-assisted processes, is actively being researched for converting waste and biomass into oil, gas, and intermediate chemicals to achieve higher oil yields.
ENVIRONMENTAL CHEMISTRY LETTERS
(2021)
Article
Mining & Mineral Processing
Tao Xu et al.
Summary: The gasification kinetic modelling and prediction model for Victorian brown coal chars were found to be applicable in this study, with limited effect on gasification rate by particle size under 106μm. Maddingley char and Yallourn char showed differences in activation energies and pre-exponential factors during CO2 gasification.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY
(2021)
Review
Energy & Fuels
Laura Santamaria et al.
Summary: This review focuses on the production of H-2 from biomass and waste plastics using pyrolysis-reforming, highlighting the bottleneck in the design of reforming catalysts. The study emphasizes the significant impact of catalytic materials and synthesis methods on the performance of the pyrolysis-reforming process.
Article
Chemistry, Analytical
Baofeng Zhao et al.
Summary: The experiment demonstrated that a 10 wt.% Ni/CaO catalyst with magnetic properties showed favorable catalytic ability in producing H2 from biomass pyrolysis, with H2 content and yield increasing with higher magnetic field intensity. The study suggests that biomass catalytic pyrolysis assisted with a magnetic field is a promising technology for enhancing H2-rich gas production.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
(2021)
Article
Green & Sustainable Science & Technology
Shoaib Raza Khan et al.
Summary: The acid-pretreatment of rice straw followed by pyrolysis showed significant improvements in the heating value and lignocellulose content. The use of HZSM-5 catalyst during pyrolysis greatly enhanced the transformation of oxygenates into hydrocarbons.
JOURNAL OF CLEANER PRODUCTION
(2021)
Review
Green & Sustainable Science & Technology
Ningbo Gao et al.
Summary: The gasification of biomass produces syngas for electricity generation and fuels production, but tar generated as a by-product causes issues. Catalytic steam reforming with nickel-based catalysts can convert tar into more syngas efficiently. Research has focused on modifying nickel-based catalysts to improve performance in steam tar reforming.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2021)
Review
Green & Sustainable Science & Technology
M. M. Hasan et al.
Summary: The utilization of municipal solid waste (MSW) as a renewable energy source through pyrolysis technology is considered revolutionary and promising. The temperature, process parameters, and environmental considerations are crucial factors to be studied for maximizing biofuel production and ensuring eco-friendly operation of pyrolysis facilities.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2021)
Article
Chemistry, Physical
Ishaka Muhammad et al.
Summary: The study aimed to enhance the catalyst-biomass contact via co-pressing as a pre-treatment method to achieve efficient pyrolysis of biomass and improve product quality. Results showed that catalytic pyrolysis of biomass components with HY and USY zeolites increased liquid yields, decreased coke/char yields, and produced desired range of product fractions.
Article
Chemistry, Physical
Boyu Qu et al.
Summary: Ni/Fe bimetallic catalysts have been proven to effectively catalyze the pyrolysis of waste tires, reducing activation energy and reaction order, transforming alkenes into aromatic hydrocarbons. The Ni-based catalyst and Ni/Fe bimetallic catalyst exhibit similar catalytic performance, with the latter potentially reducing catalyst costs.
Article
Energy & Fuels
Qian Li et al.
Summary: The drop tube furnace was used to investigate the characteristics of coal pyrolysis product, showing that pyrolysis could increase the specific surface area and total pore volume of coal, while producing syngas with high H2+CO content at high temperatures, suitable for synthetic chemical industry raw materials.
JOURNAL OF THE ENERGY INSTITUTE
(2021)
Article
Thermodynamics
Tao Xu et al.
ENERGY CONVERSION AND MANAGEMENT
(2019)
Review
Chemistry, Applied
Xun Hu et al.
JOURNAL OF ENERGY CHEMISTRY
(2019)
Article
Chemistry, Analytical
Tao Xu et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
(2016)
Article
Engineering, Environmental
M. Trninic et al.
WASTE MANAGEMENT & RESEARCH
(2016)
Article
Engineering, Chemical
Mariano Martin Martin
INDUSTRIAL CHEMICAL PROCESS ANALYSIS AND DESIGN
(2016)
Article
Chemistry, Analytical
Gao Ningbo et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
(2015)
Article
Agricultural Engineering
Qinglong Xie et al.
BIORESOURCE TECHNOLOGY
(2012)
Article
Energy & Fuels
William J. DeSisto et al.