Related references
Note: Only part of the references are listed.A review of trends and drivers of greenhouse gas emissions by sector from 1990 to 2018
William F. Lamb et al.
ENVIRONMENTAL RESEARCH LETTERS (2021)
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jaeki Jeong et al.
NATURE (2021)
Poly [2,7-(9,9-dihexylfluorene)]-block-poly[2-(dimethylamino)ethylmethacrylate] as resilient cathode interlayers in polymer solar cells: the effect of block ratios
Jianfei Fu et al.
JOURNAL OF POWER SOURCES (2020)
Graphdiyne Derivative as Multifunctional Solid Additive in Binary Organic Solar Cells with 17.3% Efficiency and High Reproductivity
Le Liu et al.
ADVANCED MATERIALS (2020)
Organic tandem solar cells with 18.6% efficiency
Muath Bani Salim et al.
SOLAR ENERGY (2020)
Asymmetric Acceptors with Fluorine and Chlorine Substitution for Organic Solar Cells toward 16.83% Efficiency
Tao Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2020)
Passivating Surface Defects of n-SnO2 Electron Transporting Layer by InP/ZnS Quantum Dots: Toward Efficient and Stable Organic Solar Cells
Ruixiang Peng et al.
ADVANCED ELECTRONIC MATERIALS (2020)
17.1% Efficient Single-Junction Organic Solar Cells Enabled by n-Type Doping of the Bulk-Heterojunction
Yuanbao Lin et al.
ADVANCED SCIENCE (2020)
Delicate Morphology Control Triggers 14.7% Efficiency All-Small-Molecule Organic Solar Cells
Hua Tang et al.
ADVANCED ENERGY MATERIALS (2020)
Simultaneous Passivation of Surface Vacancies and Enhancement in Charge Transfer Property of ZnO Electron Transport Layer for Inverted Organic Solar Cells
Kavitha Pandi et al.
ENERGY TECHNOLOGY (2020)
Small-molecule electrolytes with different ionic functionalities as a cathode buffer layer for polymer solar cells
Mijin Jeong et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Reconfiguration of Interfacial and Bulk Energy Band Structure for High-Performance Organic and Thermal-Stability Enhanced Perovskite Solar Cells
Yaxiong Guo et al.
SOLAR RRL (2020)
Over 14% Efficiency Folding-Flexible ITO-free Organic Solar Cells Enabled by Eco-friendly Acid-Processed Electrodes
Wei Song et al.
ISCIENCE (2020)
Novel cathode buffer layer of Al(acac)3enables efficient, large area and stable semi-transparent organic solar cells
Yiming Bai et al.
MATERIALS CHEMISTRY FRONTIERS (2020)
A universal solution processed interfacial bilayer enabling ohmic contact in organic and hybrid optoelectronic devices
Joel Troughton et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Passivated Metal Oxide n-Type Contacts for Efficient and Stable Organic Solar Cells
Haotian Jiang et al.
ACS APPLIED ENERGY MATERIALS (2020)
Highly efficient inverted organic light-emitting devices adopting solution-processed double electron-injection layers
Yuehua Chen et al.
ORGANIC ELECTRONICS (2019)
Prospects for low-toxicity lead-free perovskite solar cells
Weijun Ke et al.
NATURE COMMUNICATIONS (2019)
Enhancing device performance of inverted organic solar cells with SnO2/Cs2CO3 as dual electron transport layers
Van-Huong Tran et al.
ORGANIC ELECTRONICS (2019)
Use of the Phen-NaDPO:Sn(SCN)2 Blend as Electron Transport Layer Results to Consistent Efficiency Improvements in Organic and Hybrid Perovskite Solar Cells
Akmaral Seitkhan et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS
Yuanbao Lin et al.
ADVANCED MATERIALS (2019)
Dual-functional cathode buffer layer for power conversion efficiency enhancement of bulk-heterojunction solar cells
Ram Datt et al.
SYNTHETIC METALS (2019)
Efficiency above 12% for 1 cm2 Flexible Organic Solar Cells with Ag/Cu Grid Transparent Conducting Electrode
Yunfei Han et al.
ADVANCED SCIENCE (2019)
Importance of interfacial crystallinity to reduce open-circuit voltage loss in organic solar cells
Seiichiro Izawa et al.
APPLIED PHYSICS LETTERS (2019)
Synthesis of N,S-Doped Carbon Quantum Dots for Use in Organic Solar Cells as the ZnO Modifier To Eliminate the Light-Soaking Effect
Yaling Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
High-performance inverted polymer solar cells without an electron extraction layer via a one-step coating of cathode buffer and active layer
Nannan Zheng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Multi-Sulfur-Annulated Fused Perylene Diimides for Organic Solar Cells with Low Open-Circuit Voltage Loss
Xiangchun Li et al.
ACS APPLIED ENERGY MATERIALS (2019)
Design, Synthesis, and Postvapor Treatment of Neutral Fulleropyrrolidine Electron-Collecting Interlayers for High-Efficiency Inverted Polymer Solar Cells
Yanting Gong et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
A universal approach for optimizing charge extraction in electron transporting layer-free organic solar cells via Lewis base doping
Rong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Potential Substitutes for Replacement of Lead in Perovskite Solar Cells: A Review
Ravinder Kour et al.
GLOBAL CHALLENGES (2019)
A review of crystalline silicon bifacial photovoltaic performance characterisation and simulation
Tian Shen Liang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Flexible and Semitransparent Organic Solar Cells
Yaowen Li et al.
ADVANCED ENERGY MATERIALS (2018)
Novel Nonconjugated Polymer as Cathode Buffer Layer for Efficient Organic Solar Cells
Yunhao Cai et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Organic solar cells on Al electroded opaque substrates: Assessing the need of ZnO as electron transport layer
L. Sowjanya Pali et al.
SOLAR ENERGY (2018)
Small Molecule Interlayers in Organic Solar Cells
Xiaodong Li et al.
ADVANCED ENERGY MATERIALS (2018)
Solution-Processable Conjugated Polymers as Anode Interfacial Layer Materials for Organic Solar Cells
Bowei Xu et al.
ADVANCED ENERGY MATERIALS (2018)
Efficient CsF interlayer for high and low bandgap polymer solar cell
Abu Farzan Mitul et al.
AIP ADVANCES (2018)
High-Performance Inverted Polymer Solar Cells: Study and Analysis of Different Cathode Buffer Layers
Gonzalo Lastra et al.
IEEE JOURNAL OF PHOTOVOLTAICS (2018)
Chemical reaction between an ITIC electron acceptor and an amine-containing interfacial layer in non-fullerene solar cells
Lin Hu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Improving the exciton dissociation of polymer/fullerene interfaces with a minimal loading amount of energy cascading molecular dopant
Yang Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Low Work Function Surface Modifiers for Solution-Processed Electronics: A Review
Xiang Peng et al.
ADVANCED MATERIALS INTERFACES (2018)
Organic and solution-processed tandem solar cells with 17.3% efficiency
Lingxian Meng et al.
SCIENCE (2018)
Area dependent behavior of bathocuproine (BCP) as cathode interfacial layers in organic photovoltaic cells
Bhushan R. Patil et al.
SCIENTIFIC REPORTS (2018)
High-efficiency organic solar cells based on a halide salt and polyfluorene polymer with a high alignment-level of the cathode selective contact
Victor S. Balderrama et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Titanium Dioxide/Graphene and Titanium Dioxide/Graphene Oxide Nanocomposites: Synthesis, Characterization and Photocatalytic Applications for Water Decontamination
Amr Tayel et al.
CATALYSTS (2018)
Wide-Bandgap Small Molecular Acceptors Based on a Weak Electron-Withdrawing Moiety for Efficient Polymer Solar Cells
Yanting Gong et al.
SOLAR RRL (2018)
Understanding Energy Loss in Organic Solar Cells: Toward a New Efficiency Regime
S. Matthew Menke et al.
JOULE (2018)
Fullerene Derivatives for the Applications as Acceptor and Cathode Buffer Layer Materials for Organic and Perovskite Solar Cells
Chaohua Cui et al.
ADVANCED ENERGY MATERIALS (2017)
Triangle-, tripod-, and tetrapod-branched ITO nanocrystals for anisotropic infrared plasmonics
Yu Gu et al.
NANOSCALE (2017)
5-nm LiF as an Efficient Cathode Buffer Layer in Polymer Solar Cells Through Simply Introducing a C60 Interlayer
Xiaodong Liu et al.
NANOSCALE RESEARCH LETTERS (2017)
Interface passivation and electron transport improvement of polymer solar cells through embedding a polyfluorene layer
Shujun Li et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)
An overview on basics of organic and dye sensitized solar cells, their mechanism and recent improvements
Priyanka P. Kumavat et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Effect of BCP buffer layer on eliminating charge accumulation for high performance of inverted perovskite solar cells
Chuanliang Chen et al.
RSC ADVANCES (2017)
A small molecule/fullerene binary acceptor system for high-performance polymer solar cells with enhanced light-harvesting properties and balanced carrier mobility
Yang Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
5-nm LiF as an Efficient Cathode Buffer Layer in Polymer Solar Cells Through Simply Introducing a C60 Interlayer
Xiaodong Liu et al.
NANOSCALE RESEARCH LETTERS (2017)
Annealing-Free ZnO:PEI Composite Cathode Interfacial Layer for Efficient Organic Solar Cells
Chunyu Liu et al.
ACS PHOTONICS (2017)
Mechanical Properties of Organic Semiconductors for Stretchable, Highly Flexible, and Mechanically Robust Electronics
Samuel E. Root et al.
CHEMICAL REVIEWS (2017)
Room-Temperature Solution-Processed n-Doped Zirconium Oxide Cathode Buffer Layer for Efficient and Stable Organic and Hybrid Perovskite Solar Cells
Chih-Yu Chang et al.
CHEMISTRY OF MATERIALS (2016)
Optimization of the Energy Level Alignment between the Photoactive Layer and the Cathode Contact Utilizing Solution Processed Hafnium Acetylacetonate as Buffer Layer for Efficient Polymer Solar Cells
Lu Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Highly Efficient and Air Stable Inverted Polymer Solar Cells Using LiF-Modified ITO Cathode and MoO3/AgAl Alloy Anode
Xiangkun Jia et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
High-Performance Inverted Polymer Solar Cells with Zirconium Acetylacetonate Buffer Layers
Haijun Fan et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Interplay between Interfacial Structures and Device Performance in Organic Solar Cells: A Case Study with the Low Work Function Metal, Calcium
Huanxin Ju et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Dithienogermole-based solution-processed molecular solar cells with efficiency over 9%
Vinay Gupta et al.
CHEMICAL COMMUNICATIONS (2016)
Mechanisms for Spontaneous Generation of Interlayers in Organic Solar Cells
Jane Vinokur et al.
CHEMISTRY OF MATERIALS (2016)
Efficient perovskite solar cells by metal ion doping
Jacob Tse-Wei Wang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Ca/Alq3 hybrid cathode buffer layer for the optimization of organic solar cells based on a planar heterojunction
Z. El Jouad et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2016)
Luminescent cathode buffer layer for enhanced power conversion efficiency and stability of bulk-heterojunction solar cells
Swati Bishnoi et al.
ORGANIC ELECTRONICS (2016)
Achieving a high fill factor for organic solar cells
Meng-Huan Jao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Electrochemically deposited interlayer between PEDOT:PSS and phosphorescent emitting layer for multilayer solution-processed phosphorescent OLEDs
Tiancheng Yu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Zhigang Yin et al.
ADVANCED SCIENCE (2016)
Research Progress on Inorganic Buffer Layer Materials in Organic Inorganic Hybrid Solar Cells
Ye Senyun et al.
ACTA CHIMICA SINICA (2015)
Effect of leakage current and shunt resistance on the light intensity dependence of organic solar cells
Christopher M. Proctor et al.
APPLIED PHYSICS LETTERS (2015)
Electrolytes in Dye-Sensitized Solar Cells
Jihuai Wu et al.
CHEMICAL REVIEWS (2015)
ZnO cathode buffer layers for inverted polymer solar cells
Zhiqiang Liang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells
Fuzhi Wang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells
Chu-Chen Chueh et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Utilising solution processed zirconium acetylacetonate as an electron extracting layer in both regular and inverted small molecule organic photovoltaic cells
I. Hancox et al.
ORGANIC ELECTRONICS (2015)
Effect of a cathode buffer layer on the stability of organic solar cells
Danbei Wang et al.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2015)
Addressing the light-soaking issue in inverted organic solar cells using chemical bath deposited fluorinated TiOx electron transport layer
Fang Jeng Lim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Application of Biuret, Dicyandiamide, or Urea as a Cathode Buffer Layer toward the Efficiency Enhancement of Polymer Solar Cells
Xuemei Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Cesium Carbonate Functionalized Graphene Quantum Dots as Stable Electron-Selective Layer for Improvement of Inverted Polymer Solar Cells
Hong Bin Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Inverted organic solar cells employing RGO/TiOx composite films as electron transport layers
Yang Zhang et al.
ELECTROCHIMICA ACTA (2014)
The emergence of perovskite solar cells
Martin A. Green et al.
NATURE PHOTONICS (2014)
Performance improvement of inverted organic solar cells by adding ultrathin Al2O3 as an electron selective layer and a plasma enhanced chemical vapor deposition of SiOx encapsulating layer
Lei Qi et al.
THIN SOLID FILMS (2014)
Morphological Control for Highly Efficient Inverted Polymer Solar Cells Via the Backbone Design of Cathode Interlayer Materials
Wenjun Zhang et al.
ADVANCED ENERGY MATERIALS (2014)
High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer
Zhan'ao Tan et al.
SCIENTIFIC REPORTS (2014)
High efficiency inverted polymer solar cells with room-temperature titanium oxide/polyethylenimine films as electron transport layers
Dong Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Effect of ZnO:Cs2CO3 on the performance of organic photovoltaics
Hyeong Pil Kim et al.
NANOSCALE RESEARCH LETTERS (2014)
Development of Inverted Organic Solar Cells with TiO2 Interface Layer by Using Low-Temperature Atomic Layer Deposition
Zhenhua Lin et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Efficient Solution-Processed Small-Molecule Solar Cells with Inverted Structure
Aung Ko Ko Kyaw et al.
ADVANCED MATERIALS (2013)
Biopolymer as an electron selective layer for inverted polymer solar cells
Mein Jin Tan et al.
APPLIED PHYSICS LETTERS (2013)
High-Efficiency Polymer Solar Cells via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer as a Cathode Interlayer
Shengjian Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Improved Light Harvesting and Improved Efficiency by Insertion of an Optical Spacer (ZnO) in Solution-Processed Small-Molecule Solar Cells
Aung Ko Ko Kyaw et al.
NANO LETTERS (2013)
An energy-harvesting scheme employing CuGaSe2 quantum dot-modified ZnO buffer layers for drastic conversion efficiency enhancement in inorganic-organic hybrid solar cells
Cherng-Rong Ho et al.
NANOSCALE (2013)
Low temperature, solution-processed alumina for organic solar cells
Jun Peng et al.
NANOTECHNOLOGY (2013)
A pyridine-functionalized pyrazolinofullerene used as a buffer layer in polymer solar cells
Pingao Yang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
A new alcohol-soluble electron-transporting molecule for efficient inverted polymer solar cells
Jing Li et al.
ORGANIC ELECTRONICS (2013)
Room temperature solution-processed electron transport layer for organic solar cells
A. Hadipour et al.
ORGANIC ELECTRONICS (2013)
Graphene quantum dots-incorporated cathode buffer for improvement of inverted polymer solar cells
Hong Bin Yang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Enhanced photovoltaic performance of inverted polymer solar cells by tuning the structures of titanium dioxide
Ruixiang Peng et al.
THIN SOLID FILMS (2013)
Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells
Vinay Gupta et al.
SCIENTIFIC REPORTS (2013)
Thermo-cleavable fullerene materials as buffer layers for efficient polymer solar cells
Shan Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Electrostatically Self-Assembled Nonconjugated Polyelectrolytes as an Ideal Interfacial Layer for Inverted Polymer Solar Cells
Hongkyu Kang et al.
ADVANCED MATERIALS (2012)
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
Hin-Lap Yip et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Oleamide as a self-assembled cathode buffer layer for polymer solar cells: the role of the terminal group on the function of the surfactant
Wenfeng Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Full electronic structure across a polymer heterojunction solar cell
Johannes Frisch et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Stamping Transfer of a Quantum Dot Interlayer for Organic Photovoltaic Cells
Ji Hye Jeon et al.
LANGMUIR (2012)
Solution-Processed LiF for Work Function Tuning in Electrode Bilayers
Taner Aytun et al.
NANO LETTERS (2012)
CdSe quantum dot cathode buffer for inverted organic bulk hetero-junction solar cells
Yeon-Il Lee et al.
ORGANIC ELECTRONICS (2012)
A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
Yinhua Zhou et al.
SCIENCE (2012)
High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO
Yongxiang Zhu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Efficient, Air-Stable Bulk Heterojunction Polymer Solar Cells Using MoOx as the Anode Interfacial Layer
Yanming Sun et al.
ADVANCED MATERIALS (2011)
Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer
Yanming Sun et al.
ADVANCED MATERIALS (2011)
Effect of electron transport layer crystallinity on the transient characteristics of inverted organic solar cells
Yong-Jin Kang et al.
APPLIED PHYSICS LETTERS (2011)
The future of metal-organic frameworks
Neil R. Champness
DALTON TRANSACTIONS (2011)
The role of buffer layers in polymer solar cells
Riccardo Po et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Development of Hybrid Photovoltaic Cells by Incorporating CuInS2 Quantum Dots into Organic Photoactive Layers
Minwoo Nam et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2011)
The crystallinity and mechanical properties of indium tin oxide coatings on polymer substrates
Eun-Hye Kim et al.
JOURNAL OF APPLIED PHYSICS (2011)
Low-temperature growth and characterization of ZnO thin films for flexible inverted organic solar cells
Kyung-Sik Shin et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
How Far Can Polymer Solar Cells Go? In Need of a Synergistic Approach
Feng He et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
Influence of the indium tin oxide/organic interface on open-circuit voltage, recombination, and cell degradation in organic small-molecule solar cells
Stefan Schaefer et al.
PHYSICAL REVIEW B (2011)
Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer
Tobias Stubhan et al.
ORGANIC ELECTRONICS (2011)
Outlook Brightens for Plastic Solar Cells
Robert F. Service
SCIENCE (2011)
Comparison of various sol-gel derived metal oxide layers for inverted organic solar cells
Hyunchul Oh et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
UV light protection through TiO2 blocking layers for inverted organic solar cells
Haiyan Sun et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Investigations of efficiency improvements in poly(3-hexylthiophene) based organic solar cells using calcium cathodes
Wei-Hsuan Tseng et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Organic photovoltaic cells based on TPBi as a cathode buffer layer
Junsheng Yu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
The effect of introducing a buffer layer to polymer solar cells on cell efficiency
Gi-Hwan Kim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
The effect of small-molecule electron transporting materials on the performance of polymer solar cells
Hailiang Du et al.
THIN SOLID FILMS (2011)
Electrical and Photo-Induced Degradation of ZnO Layers in Organic Photovoltaics
Assaf Manor et al.
ADVANCED ENERGY MATERIALS (2011)
An Organic Hole Transport Layer Enhances the Performance of Colloidal PbSe Quantum Dot Photovoltaic Devices
Chih-Yin Kuo et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Interface Engineering for Organic Electronics
Hong Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Inverted tandem organic solar cells with a MoO3/Ag/Al/Ca intermediate layer
X. W. Sun et al.
APPLIED PHYSICS LETTERS (2010)
Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes
Seok-In Na et al.
APPLIED PHYSICS LETTERS (2010)
Effects of cathode buffer layers on the efficiency of bulk-heterojunction solar cells
Ching-Chun Chang et al.
APPLIED PHYSICS LETTERS (2010)
Performance analysis of copper-indium-gallium-diselenide (CIGS) solar cells with various buffer layers by SCAPS
Puvaneswaran Chelvanathan et al.
CURRENT APPLIED PHYSICS (2010)
Inverted organic solar cells with ITO electrodes modified with an ultrathin Al2O3 buffer layer deposited by atomic layer deposition
Yinhua Zhou et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Interface materials for organic solar cells
Roland Steim et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Enhanced Power Conversion Efficiency of Inverted Organic Solar Cells with a Ga-Doped ZnO Nanostructured Thin Film Prepared Using Aqueous Solution
Kyung-Sik Shin et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2010)
Roles of Interlayers in Efficient Organic Photovoltaic Devices
Jong Hyeok Park et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2010)
A Review on the Development of the Inverted Polymer Solar Cell Architecture
Steven K. Hau et al.
POLYMER REVIEWS (2010)
The influence of electrode buffer layers on the performance of polymer photovoltaic devices
Zhihui Feng et al.
RENEWABLE ENERGY (2010)
Interfacial processes in small molecule organic solar cells
Li WenBin et al.
SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2010)
Inverted small molecule organic solar cells with Ca modified ITO as cathode and MoO3 modified
F. J. Zhang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Low work function metal modified ITO as cathode for inverted polymer solar cells
Chang Yun Jiang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Doping of the Metal Oxide Nanostructure and its Influence in Organic Electronics
Mi-Hyae Park et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Transient photovoltaic behavior of air-stable, inverted organic solar cells with solution-processed electron transport layer
Chang Su Kim et al.
APPLIED PHYSICS LETTERS (2009)
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Yen-Ju Cheng et al.
CHEMICAL REVIEWS (2009)
Effect of CsF interlayer on the performance of polymer bulk heterojunction solar cells
Xiaoxia Jiang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Inverted and transparent polymer solar cells prepared with vacuum-free processing
Yinhua Zhou et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Thin pentacene interlayer for polymer bulk-heterojunction solar cell
Ju-Hyung Kim et al.
APPLIED PHYSICS LETTERS (2008)
Interface modification for highly efficient organic photovoltaics
Roland Steim et al.
APPLIED PHYSICS LETTERS (2008)
An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer
A. K. K. Kyaw et al.
APPLIED PHYSICS LETTERS (2008)
Efficacy of TiOx optical spacer in bulk-heterojunction solar cells processed with 1,8-octanedithiol
Jae Kwan Lee et al.
APPLIED PHYSICS LETTERS (2008)
Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
Hua-Hsien Liao et al.
APPLIED PHYSICS LETTERS (2008)
Criteria for improved open-circuit voltage in a-Si:H(N)/c-Si(P) front heterojunction with intrinsic thin layer solar cells
Madhumita Nath et al.
JOURNAL OF APPLIED PHYSICS (2008)
Cesium carbonate as a functional interlayer for polymer photovoltaic devices
Fang-Chung Chen et al.
JOURNAL OF APPLIED PHYSICS (2008)
Effects of thermal annealing on polymer photovoltaic cells with buffer layers and in situ formation of interfacial layer for enhancing power conversion efficiency
Yun Zhao et al.
SYNTHETIC METALS (2008)
Inorganic photovoltaic cells
Robert W. Miles et al.
MATERIALS TODAY (2007)
Low-work-function surface formed by solution-processed and thermally deposited nanoscale layers of cesium carbonate
Jinsong Huang et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Performance improvement of polymer solar cells by using a solution processible titanium chelate as cathode buffer layer
Zhan'ao Tan et al.
APPLIED PHYSICS LETTERS (2007)
Comparative study of the influence of LiF, NaF, and KF on the performance of polymer bulk heterojunction solar cells
Erik Ahlswede et al.
APPLIED PHYSICS LETTERS (2007)
Vinyl polymers as non-viral gene delivery carriers: Current status and prospects
Peter Dubruel et al.
MACROMOLECULAR BIOSCIENCE (2006)
Efficient inverted polymer solar cells
G. Li et al.
APPLIED PHYSICS LETTERS (2006)
Organic solar cells with carbon nanotubes replacing In2O3: Sn as the transparent electrode
Jao van de Lagemaat et al.
APPLIED PHYSICS LETTERS (2006)
New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer
JY Kim et al.
ADVANCED MATERIALS (2006)
Achieving high-efficiency polymer white-light-emitting devices
JS Huang et al.
ADVANCED MATERIALS (2006)
High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
G Li et al.
NATURE MATERIALS (2005)
Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology
WL Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Performance improvement by inserting an electrodeposited ZnO into ITO/organic solid interface in organic solid-state solar cells
K Takahashi et al.
CHEMISTRY LETTERS (2005)
Development of air stable polymer solar cells using an inverted gold on top anode structure
Y Sahin et al.
THIN SOLID FILMS (2005)
A brief history of the development of organic and polymeric photovoltaics
H Spanggaard et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2004)
Interface dipole at organic/metal interfaces and organic solar cells
X Crispin
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2004)
MIP-type organic solar cells incorporating phthalocyanine/fullerene mixed layers and doped wide-gap transport layers
J Drechsel et al.
ORGANIC ELECTRONICS (2004)
Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate): A photoelectron spectroscopy study
X Crispin et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2003)
Effect of LiF/metal electrodes on the performance of plastic solar cells
CJ Brabec et al.
APPLIED PHYSICS LETTERS (2002)
Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes
MP de Jong et al.
APPLIED PHYSICS LETTERS (2000)
Share Paper
