Related references
Note: Only part of the references are listed.
Article
Mining & Mineral Processing
Yuantian Sun et al.
Summary: This study introduced the jet grouting technique to improve the self-supporting ability of coal mass and analyzed the strength of JG composite by studying the UCS evolution patterns. The results showed that chemical grout composite has higher short-term strength, while cement grout composite achieves more stable long-term strength. Models with adjusted parameters can achieve high prediction accuracy, highlighting the importance of grout type and curing time consideration.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY
(2021)
Article
Environmental Sciences
Dan Ma et al.
Summary: The study shows that with increasing wetting-drying cycles, the porosity and permeability of CPB samples increase, with those having smaller particle size distribution and cementing strength being more sensitive. The uniaxial compressive strength and elastic modulus of CPB samples deteriorate during wetting-drying cycles, especially for those with smaller particle size distribution and cementing strength. The deterioration process of mechanical properties of CPB samples due to wetting-drying cycles can be divided into initial deterioration and re-deterioration stages, with the periodic destruction of the cemented structures verified through microstructure analysis.
Article
Engineering, Mechanical
Jianhang Chen et al.
Summary: A theoretical solution was proposed to investigate the performance of fully encapsulated rock bolts, which included simulating the coupling and decoupling behavior of the B/G interface and confirming the feasibility through physical experiments. The advantage of this theoretical model lies in the direct acquisition of all input parameters from experimental pullout scenarios.
ENGINEERING FAILURE ANALYSIS
(2021)
Article
Environmental Sciences
Dan Ma et al.
Summary: Gangue backfilling mining (GBM) can effectively alleviate gangue pollution and protect overburden aquifers. The hydraulic properties and deformation behaviors of granular gangues were studied, showing that these properties vary with the original grain size grade and stress rate. An improved model based on fractal dimension was found to have better accuracy in predicting permeability evolution compared to the traditional Kruger model.
Review
Construction & Building Technology
Kui Wu et al.
Summary: This review discusses the recent advances in the development and application of yielding supports in tunneling in squeezing grounds. It covers the definition, principle, working characteristics, mechanical performance of yielding supports, and tunnel performance supported by different yielding elements. The review also includes potential estimation methods for rock squeezing and summarizes the applicability of yielding supports, along with recommendations for further research.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
(2021)
Article
Green & Sustainable Science & Technology
Yuantian Sun et al.
Summary: This study evaluated the quality improvement of coal and grouted coal specimens through a series of direct shear tests, and found that the strength and stiffness of grouted coal were significantly improved with the increase of grout column diameter. Linear regression models were established for predicting mechanical parameters and three failure models associated with coal and grouted coal specimens were revealed. This research can provide a basic evaluation and guideline for the parametric design of cement pre-grouting applications in soft coal mass.
Article
Chemistry, Multidisciplinary
Yuantian Sun et al.
Summary: The study investigates the stability control of deep underground coal mine roadways, finding that long working face mining causes roadway deformation to increase. Numerical simulations and support measures are used to ensure safe mine production.
APPLIED SCIENCES-BASEL
(2021)
Article
Energy & Fuels
Jianhang Chen et al.
Summary: In this study, a two-stage shear coupling model was used to simulate the bonding performance of the interface between rock bolts and grout material. The modified cableSELs in FLAC3D showed that the load transfer capacity of rock bolts increased significantly with the diameter of the bolt. The performance of the rock bolting system was observed to change from ductile behavior to brittle behavior as the bolt diameter increased.
INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY
(2021)
Article
Engineering, Chemical
Qingliang Chang et al.
Summary: The study demonstrates the significant impact of CPB strength on the stability of the false roof, reducing stress and displacement and ensuring safety during mining operations. Additionally, preliminary tests show that factors such as cement dosage, rock fineness, and mass concentration play key roles in improving CPB quality and supporting the stability of the false roof.
DESALINATION AND WATER TREATMENT
(2021)
Article
Energy & Fuels
Yuantian Sun et al.
ENERGY SCIENCE & ENGINEERING
(2020)
Article
Energy & Fuels
Yuantian Sun et al.
ENERGY SCIENCE & ENGINEERING
(2020)
Article
Green & Sustainable Science & Technology
Yuantian Sun et al.
Article
Engineering, Geological
Yuantian Sun et al.
ENGINEERING GEOLOGY
(2019)
Article
Geochemistry & Geophysics
Wenyu Lv et al.
Article
Environmental Sciences
Dan Ma et al.
SCIENCE OF THE TOTAL ENVIRONMENT
(2019)
Article
Geosciences, Multidisciplinary
Yuantian Sun et al.
ARABIAN JOURNAL OF GEOSCIENCES
(2019)
Article
Green & Sustainable Science & Technology
Yuantian Sun et al.
Article
Engineering, Geological
Hakan Basarir et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
(2019)
Article
Mining & Mineral Processing
Chang Qingliang et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY
(2018)
