Related references
Note: Only part of the references are listed.18.4 % Organic Solar Cells Using a High Ionization Energy Self-Assembled Monolayer as Hole-Extraction Interlayer
Yuanbao Lin et al.
CHEMSUSCHEM (2021)
Pushing the Limits of Flexibility and Stretchability of Solar Cells: A Review
Emilie Dauzon et al.
ADVANCED MATERIALS (2021)
A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control
Jianqiu Wang et al.
ADVANCED MATERIALS (2021)
Factors contributing to degradation of organic photovoltaic cells
Makoto Karakawa et al.
ORGANIC ELECTRONICS (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability
Yuanbao Lin et al.
ACS ENERGY LETTERS (2020)
A Simple n-Dopant Derived from Diquat Boosts the Efficiency of Organic Solar Cells to 18.3%
Yuanbao Lin et al.
ACS ENERGY LETTERS (2020)
17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS
Yuanbao Lin et al.
ADVANCED MATERIALS (2019)
Branched Polyethylene as a Plasticizing Additive to Modulate the Mechanical Properties of π-Conjugated Polymers
Mania Selivanova et al.
MACROMOLECULES (2019)
Composition Morphology Correlation in PTB7-Th/PC71 BM Blend Films for Organic Solar Cells
Lin Song et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Tuning the Cross-Linker Crystallinity of a Stretchable Polymer Semiconductor
Ging-Ji Nathan Wang et al.
CHEMISTRY OF MATERIALS (2019)
Mechanically robust, stretchable organic solar cells via buckle-on-elastomer strategy
Yun-Ting Hsieh et al.
ORGANIC ELECTRONICS (2018)
Highly Flexible and Efficient All-Polymer Solar Cells with High-Viscosity Processing Polymer Additive toward Potential of Stretchable Devices
Shanshan Chen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Effects of flexibility and branching of side chains on the mechanical properties of low-bandgap conjugated polymers
Fumitaka Sugiyama et al.
POLYMER CHEMISTRY (2018)
Network-Stabilized Bulk Heterojunction Organic Photovoltaics
Jorge Wu Mok et al.
CHEMISTRY OF MATERIALS (2018)
Chlorinated Wide-Bandgap Donor Polymer Enabling Annealing Free Nonfullerene Solar Cells with the Efficiency of 11.5%
Zhitian Liu et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)
Progress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics
William R. Mateker et al.
ADVANCED MATERIALS (2017)
Correlating Crack Onset Strain and Cohesive Fracture Energy in Polymer Semiconductor Films
Nrup Balar et al.
MACROMOLECULES (2017)
Highly stretchable polymer semiconductor films through the nanoconfinement effect
Jie Xu et al.
SCIENCE (2017)
A Solid-State Intrinsically Stretchable Polymer Solar Cell
Lu Li et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Versatile Interpenetrating Polymer Network Approach to Robust Stretchable Electronic Devices
Guoyan Zhang et al.
CHEMISTRY OF MATERIALS (2017)
Mechanical Properties of Polymer-Fullerene Bulk Heterojunction Films: Role of Nanomorphology of Composite Films
Jae-Han Kim et al.
CHEMISTRY OF MATERIALS (2017)
Comparison of Methods for Determining the Mechanical Properties of Semiconducting Polymer Films for Stretchable Electronics
Daniel Rodriquez et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Inducing Elasticity through Oligo-Siloxane Crosslinks for Intrinsically Stretchable Semiconducting Polymers
Ging-Ji Nathan Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Elastomer-Polymer Semiconductor Blends for High-Performance Stretchable Charge Transport Networks
Dalsu Choi et al.
CHEMISTRY OF MATERIALS (2016)
Intrinsically stretchable and healable semiconducting polymer for organic transistors
Jin Young Oh et al.
NATURE (2016)
Solution-processable MoOx nanocrystals enable highly efficient reflective and semitransparent polymer solar cells
Lethy Krishnan Jagadamma et al.
NANO ENERGY (2016)
Polythiophene Nanofibril Bundles Surface-Embedded in Elastomer: A Route to a Highly Stretchable Active Channel Layer
Minkwan Shin et al.
ADVANCED MATERIALS (2015)
Mechanical degradation and stability of organic solar cells: molecular and microstructural determinants
Suchol Savagatrup et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Tuning Mechanical and Optoelectrical Properties of Poly(3-hexylthiophene) through Systematic Regioregularity Control
Jin-Seong Kim et al.
MACROMOLECULES (2015)
Organic photovoltaics: Crosslinking for optimal morphology and stability
Joseph W. Rumer et al.
MATERIALS TODAY (2015)
Single-junction polymer solar cells with high efficiency and photovoltage
Zhicai He et al.
NATURE PHOTONICS (2015)
Role of molecular mixing on the stiffness of polymer:fullerene bulk heterojunction films
Adam D. Printz et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
A real-time study of the benefits of co-solvents in polymer solar cell processing
Jacobus J. van Franeker et al.
NATURE COMMUNICATIONS (2015)
GIXSGUI: a MATLAB toolbox for grazing-incidence X-ray scattering data visualization and reduction, and indexing of buried three-dimensional periodic nanostructured films
Zhang Jiang
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)
Mechanical Properties of Conjugated Polymers and Polymer-Fullerene Composites as a Function of Molecular Structure
Suchol Savagatrup et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
The Active Layer Morphology of Organic Solar Cells Probed with Grazing Incidence Scattering Techniques
Peter Mueller-Buschbaum
ADVANCED MATERIALS (2014)
Thermal Stabilisation of Polymer-Fullerene Bulk Heterojunction Morphology for Effi cient Photovoltaic Solar Cells
Lionel Derue et al.
ADVANCED MATERIALS (2014)
Best of Both Worlds: Conjugated Polymers Exhibiting Good Photovoltaic Behavior and High Tensile Elasticity
Suchol Savagatrup et al.
MACROMOLECULES (2014)
Stabilizing polymer-based bulk heterojunction solar cells via crosslinking
Guillaume Wantz et al.
POLYMER INTERNATIONAL (2014)
Increased elasticity of a low-bandgap conjugated copolymer by random segmentation for mechanically robust solar cells
Adam D. Printz et al.
RSC ADVANCES (2014)
Controlling the Morphology and Performance of Bulk Heterojunctions in Solar Cells. Lessons Learned from the Benchmark Poly(3-hexylthiophene):[6,6]-Phenyl-C61-butyric Acid Methyl Ester System
Minh Trung Dang et al.
CHEMICAL REVIEWS (2013)
The impact of molecular weight on microstructure and charge transport in semicrystalline polymer Semiconductors poly(3-hexylthiophene), a model study
Felix Peter Vinzenz Koch et al.
PROGRESS IN POLYMER SCIENCE (2013)
Stability of Polymer Solar Cells
Mikkel Jorgensen et al.
ADVANCED MATERIALS (2012)
Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale
Jonathan Rivnay et al.
CHEMICAL REVIEWS (2012)
Small- and Wide-Angle X-ray Scattering Characterization of Bulk Heterojunction Polymer Solar Cells with Different Fullerene Derivatives
Yu-Ching Huang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Toward mechanically robust and intrinsically stretchable organic solar cells: Evolution of photovoltaic properties with tensile strain
Darren J. Lipomi et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Moving through the Phase Diagram: Morphology Formation in Solution Cast Polymer-Fullerene Blend Films for Organic Solar Cells
Benjamin Schmidt-Hansberg et al.
ACS NANO (2011)
Stretchable Organic Solar Cells
Darren J. Lipomi et al.
ADVANCED MATERIALS (2011)
Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend
Neil D. Treat et al.
ADVANCED ENERGY MATERIALS (2011)
Correlations between Mechanical and Electrical Properties of Polythiophenes
Brendan O'Connor et al.
ACS NANO (2010)
Manufacture, integration and demonstration of polymer solar cells in a lamp for the Lighting Africa'' initiative
Frederik C. Krebs et al.
ENERGY & ENVIRONMENTAL SCIENCE (2010)
Photocrosslinkable Polythiophenes for Efficient, Thermally Stable, Organic Photovoltaics
Bumjoon J. Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Phase Diagram of P3HT/PCBM Blends and Its Implication for the Stability of Morphology
Jun Zhao et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2009)
Elastic Moduli of Organic Electronic Materials by the Buckling Method
Dongha Tahk et al.
MACROMOLECULES (2009)
Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends
Mariano Campoy-Quiles et al.
NATURE MATERIALS (2008)
Stability/degradation of polymer solar cells
Mikkel Jorgensen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)
Strategies for incorporation of polymer photovoltaics into garments and textiles
FC Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2006)
Tuning the dimensions of C60-based needlelike crystals in blended thin films
A Swinnen et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
A buckling-based metrology for measuring the elastic moduli of polymeric thin films
CM Stafford et al.
NATURE MATERIALS (2004)
One-dimensional aggregation of regioregular polyalkylthiophenes
N Kiriy et al.
NANO LETTERS (2003)