☆ 4.5 Article

Experimental and Numerical Investigations on the Mechanical Behavior of Basalt in the Dam Foundation of the Baihetan Hydropower Station

INTERNATIONAL JOURNAL OF GEOMECHANICS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Experimental study on mechanical properties of multi-layered rock mass and statistical damage constitutive model under hydraulic-mechanical coupling

Tao Zhang et al.

Summary: The triaxial compression tests were performed on multi-layered rock mass samples using a rock servo-controlled triaxial rheological test system in the laboratory. The mechanical properties of the multi-layered rock mass were studied, and the deformation characteristics and failure modes of the samples were analyzed. The relationship between the layers and mechanical parameters of the rock mass samples was also discussed. The results showed that the peak strength and peak strain of the samples increased with increasing confining pressure, and the failure forms included monoclinic shear failure, tension crack failure, and interfacial shear slip failure. The number of layers affected the peak strength, cohesive force, and internal friction angle of the multi-layered rock mass samples, and there was an exponential relationship between the internal friction angle and the number of layers. Based on the test results, a statistical damage constitutive model for the rock mass under hydraulic-mechanical coupling was established and verified.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2023)

Add to Collection

Article Engineering, Geological

Dynamic Compression-Shear Response and Failure Criterion of Rocks with Hydrostatic Confining Pressure: An Experimental Investigation

Hongbo Du et al.

Summary: The study finds that static confining pressure and dynamic loading rate enhance the load-carrying capacity of rocks, but the shear component limits the dynamic peak stress. With an increase in static confining pressure, the failure surface expands outward, while the compressive deformation modulus of rocks decreases with increasing shear component. The fragmentation behavior of rocks is restricted by static confining pressure and the shear component of dynamic loading, leading to a change in failure pattern as specimen inclination angle and static confining pressure increase.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Deformation characteristics of cement mortar under triaxial cyclic loading: An experimental investigation

Tao Zhang et al.

Summary: The deformation behavior of cement mortar was studied under different loading patterns, analyzing the elastic modulus and Poisson's ratio at various deviatoric stress levels. Additionally, scanning electron microscope and energy dispersive spectroscopy tests were conducted to examine the mechanical properties and failure mechanism for the different loading patterns.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Geological

Dynamic tensile behavior of rocks under static pre-tension using the flattened Brazilian disc method

Pengda Pei et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Engineering, Geological

Experimental Study of Bolt-Anchoring Mechanism for Bedded Rock Mass

Yulong Chen et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

Add to Collection

Article Engineering, Environmental

Deformation failure characteristics of coal-rock combined body under uniaxial compression: experimental and numerical investigations

Yulong Chen et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)

Add to Collection

Article Engineering, Mechanical

Homogenization of rock-like materials with plastic matrix based on an incremental variational principle

Lun-Yang Zhao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Add to Collection

Article Energy & Fuels

Experimental study on influence of bedding angle on gas permeability in coal

Yulong Chen et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Engineering, Geological

Experimental and Modelling Investigations of the Coupled Elastoplastic Damage of a Quasi-brittle Rock

Jiu-Chang Zhang

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

Creep and Long-Term Permeability of a Red Sandstone Subjected to Cyclic Loading After Thermal Treatments

Sheng-Qi Yang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

Verification of the Kaiser Effect in Rocks under Tensile Stress: Experiment Using the Brazilian Test

Yulong Chen et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2018)

Add to Collection

Article Engineering, Geological

Experimental and Numerical Investigations on the Mechanical Behavior of Fine-Grained Sandstone

Susheng Wang et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2018)

Add to Collection

Article Engineering, Geological

An experimental and theoretical assessment of semi-circular bend specimens with chevron and straight-through notches for mode I fracture toughness testing of rocks

Ming-Dong Wei et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)

Add to Collection

Article Mechanics

Experimental and numerical study on the fracture process zone and fracture toughness determination for ISRM-suggested semi-circular bend rock specimen

M. D. Wei et al.

ENGINEERING FRACTURE MECHANICS (2016)

Add to Collection

Article Engineering, Geological

A coupled elastoplastic damage model for brittle rocks and its application in modelling underground excavation

J. C. Zhang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

Add to Collection

Article Engineering, Geological

Testing and modeling of the mechanical behavior of dolomite in the Wudongde hydropower plant

J. C. Zhang et al.

GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2016)

Add to Collection

Article Mechanics

A refined micromechanical damage-friction model with strength prediction for rock-like materials under compression

Q. Z. Zhu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Engineering, Geological

Damage and Plastic Deformation Modeling of Beishan Granite Under Compressive Stress Conditions

L. Chen et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Add to Collection

Article Engineering, Geological

Contributions of In-Situ Stress Transient Redistribution to Blasting Excavation Damage Zone of Deep Tunnels

Peng Yan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Add to Collection

Article Engineering, Geological

A Comparative Evaluation of Stress-Strain and Acoustic Emission Methods for Quantitative Damage Assessments of Brittle Rock

Jin-Seop Kim et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Add to Collection

Article Engineering, Mechanical

A micro-macro model for clayey rocks with a plastic compressible porous matrix

W. Q. Shen et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

Add to Collection

Article Engineering, Geological

ISRM Suggested method for determination of the Schmidt hammer rebound hardness: Revised version

Adnan Aydin

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

Add to Collection

Article Geochemistry & Geophysics

The evolution of elastic moduli with increasing crack damage during cyclic stressing of a basalt from Mt. Etna volcano

M. J. Heap et al.

TECTONOPHYSICS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

A coupled elastoplastic damage model for semi-brittle materials and extension to unsaturated conditions

JF Shao et al.

MECHANICS OF MATERIALS (2006)

Add to Collection

Article Engineering, Geological

Generalized crack initiation and crack damage stress thresholds of brittle rock masses near underground excavations

M Cai et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)

Add to Collection

Article Engineering, Multidisciplinary

A coupled elastoplastic damage model for geomaterials

MR Salari et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)

Add to Collection

Article Engineering, Mechanical

Modeling of elastoplastic damage behavior of a claystone

AS Chiarelli et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2003)

Add to Collection

Article Mechanics

An elastoplastic model for unsaturated rocks and concrete

F Bourgeois et al.

MECHANICS RESEARCH COMMUNICATIONS (2002)

Add to Collection

Article Engineering, Geological

Simulation of failure around a circular opening in rock

A Fakhimi et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.