Related references
Note: Only part of the references are listed.PVA/Poly(hexamethylene guanidine)/Gallic Acid Composite Hydrogel Films and Their Antibacterial Performance
Xu Yang et al.
ACS APPLIED POLYMER MATERIALS (2021)
Biodegradable sandwich-architectured films derived from pea starch and polylactic acid with enhanced shelf-life for fruit preservation
Xiaoming Zhou et al.
CARBOHYDRATE POLYMERS (2021)
Rheological and anti-microbial study of silica and silver nanoparticles-reinforced k-carrageenan/hydroxyethyl cellulose composites for food packaging applications
Balasubramanian Rukmanikrishnan et al.
CELLULOSE (2021)
Curcumin loaded polycaprolactone-/polyvinyl alcohol-silk fibroin based electrospun nanofibrous mat for rapid healing of diabetic wound: An in-vitro and in-vivo studies
Yashi Agarwal et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)
Original Bio-Based Antioxidant Poly(meth)acrylate from Gallic AcidBased Monomers
Ali Khalil et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Antioxidant and antimicrobial poly(vinyl alcohol)-based films incorporated with grapefruit seed extract and curcumin
Swarup Roy et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)
Fabrication of biopolymer polyhydroxyalkanoate/chitosan and 2D molybdenum disulfide-doped scaffolds for antibacterial and biomedical applications
Abdul Mukheem et al.
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2020)
Preparation and characterization of synthetic melanin-like nanoparticles reinforced chitosan nanocomposite films
Swarup Roy et al.
CARBOHYDRATE POLYMERS (2020)
Binary and ternary sustainable composites of gellan gum, hydroxyethyl cellulose and lignin for food packaging applications: Biocompatibility, antioxidant activity, UV and water barrier properties
Balasubramanian Rukmanikrishnan et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
The effect of the carboxylation degree on cellulose nanofibers and waterborne polyurethane/cellulose nanofiber nanocomposites properties
Izaskun Larraza et al.
POLYMER DEGRADATION AND STABILITY (2020)
UV-blocking, transparent and hazy cellulose nanopaper with superior strength based on varied components of poplar mechanical pulp
Xinping Li et al.
CELLULOSE (2020)
Preparation of antimicrobial and antioxidant gelatin/curcumin composite films for active food packaging application
Swarup Roy et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2020)
Carboxymethyl cellulose-based antioxidant and antimicrobial active packaging film incorporated with curcumin and zinc oxide
Swarup Roy et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Preparation and thermal stability evaluation of cellulose nanofibrils from bagasse pulp with differing hemicelluloses contents
Yanxu Lu et al.
CARBOHYDRATE POLYMERS (2020)
In situ formed active and intelligent bacterial cellulose/cotton fiber composite containing curcumin
Xiaoxuan Ma et al.
CELLULOSE (2020)
Study on physicochemical properties, antioxidant and antimicrobial activity of okara soluble dietary fiber/sodium carboxymethyl cellulose/thyme essential oil active edible composite films incorporated with pectin
Derong Lin et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Preparation of chitosan/curcumin nanoparticles based zein and potato starch composite films for Schizothorax prenati fillet preservation
Songlin Xin et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Recent Trends in Elaboration, Processing, and Derivatization of Cellulosic Materials Using Ionic Liquids
Ahmed Salama et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Preparation of bioactive functional poly(lactic acid)/curcumin composite film for food packaging application
Swarup Roy et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Mechanical, Optical, Thermal, and Barrier Properties of Poly (Lactic Acid)/Curcumin Composite Films Prepared Using Twin-Screw Extruder
T. Ranjeth Kumar Reddy et al.
FOOD BIOPHYSICS (2019)
Structural characterization of cellulose pulp in aqueous NMMO solution under the process conditions of lyocell slurry
Anwar J. Sayyed et al.
CARBOHYDRATE POLYMERS (2019)
Curcumin entrapped gelatin/ionically modified bacterial cellulose based self-healable hydrogel film: An eco-friendly sustainable synthesis method of wound healing patch
Moumita Khamrai et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Highly Transparent Nanocomposites Based on Poly(vinyl alcohol) and Sulfated UV-Absorbing Wood Nanofibers
Juho Antti Sirvio et al.
BIOMACROMOLECULES (2019)
Micro Crystalline Bamboo Cellulose Based Seaweed Biodegradable Composite Films for Sustainable Packaging Material
M. Hasan et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)
Application of polymethylmethacrylate-grafted cellulose as reinforcement for compatibilised polylactic acid/natural rubber blends
Noor Afizah Rosli et al.
CARBOHYDRATE POLYMERS (2019)
Low-density polyethylene/curcumin melt extruded composites with enhanced water vapor barrier and antioxidant properties for active food packaging
Jasim Zia et al.
POLYMER (2019)
Preparation and comparative assessment of regenerated cellulose films from corn (Zea mays) stalk pulp fines in DMAc/LiCl solution
Quanqing Han et al.
CARBOHYDRATE POLYMERS (2019)
Effect of lignin on the thermal stability of cellulose nanofibrils produced from bagasse pulp
Ni Zhang et al.
CELLULOSE (2019)
Functional characterization of biopolymer based composite film: Incorporation of natural essential oils and antimicrobial agents
Rehana Akhter et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Curcumin as a natural compound in the synthesis of rigid polyurethane foams with enhanced mechanical, antibacterial and anti-ageing properties
Natalia Sienkiewicz et al.
POLYMER TESTING (2019)
Strong, Ductile, and Waterproof Cellulose Nanofibril Composite Films with Colloidal Lignin Particles
Muhammad Farooq et al.
BIOMACROMOLECULES (2019)
Calcium alginate/graphene oxide films: Reinforced composites able to prevent Staphylococcus aureus and methicillin-resistant Staphylococcus epidermidis infections with no cytotoxicity for human keratinocyte HaCaT cells
Miguel Marti et al.
EUROPEAN POLYMER JOURNAL (2019)
Reinforcement of Polycaprolactone/Chitosan with Nanoclay and Controlled Release of Curcumin for Wound Dressing
Yanping Huang et al.
ACS OMEGA (2019)
Rheology of epoxidized cellulose pulp gel-like dispersions in castor oil: Influence of epoxidation degree and the epoxide chemical structure
E. Cortes-Trivino et al.
CARBOHYDRATE POLYMERS (2018)
One-step modification and nanofibrillation of microfibrillated cellulose for simultaneously reinforcing and toughening of poly(epsilon-caprolactone)
Sha Deng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Fabrication of curcumin-loaded electrospun nanofiberous polyurethanes with anti-bacterial activity
A. Shababdoust et al.
PROGRESS IN BIOMATERIALS (2018)
Structural characterization, formation mechanism and stability of curcumin in zein-lecithin composite nanoparticles fabricated by antisolvent co-precipitation
Lei Dai et al.
FOOD CHEMISTRY (2017)
Thermal and dynamic mechanical properties of cellulose nanofibers reinforced epoxy composites
N. Saba et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)
Preparation and performance of composite films based on 2-(2-aminoethoxy) ethyl chitosan and cellulose
Xiaofei Liu et al.
RSC ADVANCES (2017)
Preparation of nanocellulose from micro-crystalline cellulose: The effect on the performance and properties of agar-based composite films
Shiv Shankar et al.
CARBOHYDRATE POLYMERS (2016)
Nanofibrillated cellulose/nanographite composite films
Sinke H. Osong et al.
CELLULOSE (2016)
Preparation and characterization of sodium carboxymethyl cellulose/cotton linter cellulose nanofibril composite films
Ahmed A. Oun et al.
CARBOHYDRATE POLYMERS (2015)
Plasticized polylactic acid/cellulose nanocomposites prepared using melt-extrusion and liquid feeding: Mechanical, thermal and optical properties
Natalia Herrera et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Use of Food and Packaging Model Matrices to Investigate the Antioxidant Properties of Biorefinery Grass Lignins
Veronique Aguie-Beghin et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2015)
Correlation between cellulose thin film supramolecular structures and interactions with water
Tekla Tammelin et al.
SOFT MATTER (2015)
Effect of cellulose nanocrystal polymorphs on mechanical, barrier and thermal properties of poly(lactic acid) based bionanocomposites
Prodyut Dhar et al.
RSC ADVANCES (2015)
Correlations of the Antioxidant Properties of Softwood Kraft Lignin Fractions with the Thermal Stability of Its Blends with Polyethylene
Hasan Sadeghifar et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
Simultaneous Reinforcing and Toughening of Polyurethane via Grafting on the Surface of Microfibrillated Cellulose
Xuelin Yao et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Curcumin loaded poly (lactic-co-glycolic) acid nanofiber for the treatment of carcinoma
Malathi Sampath et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2014)
Comparison on properties of lignocellulosic flour/polymer composites by using wood, cellulose, and lignin flours as fillers
Ru Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Biohydrogels Interpenetrated with Hydroxyethyl Cellulose and Wooden Pulp for Biocompatible Materials
Karla Lizette Tovar-Carrillo et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
All-cellulose composites from unbleached hardwood kraft pulp reinforced with nanofibrillated cellulose
M. Alcala et al.
CELLULOSE (2013)
From elastomeric to rigid polyurethane/cellulose nanocrystal bionanocomposites
A. Saralegi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Processing stabilisation of PE with a natural antioxidant, curcumin
Dora Tatraaljai et al.
EUROPEAN POLYMER JOURNAL (2013)
Cellulose hydrolysis with thermo- and alkali-tolerant cellulases in cellulose-dissolving superbase ionic liquids
Ronny Wahlstrom et al.
RSC ADVANCES (2013)
A bioplastic with high strength constructed from a cellulose hydrogel by changing the aggregated structure
Qiyang Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Compression molded wood pulp biocomposites: a study of hemicellulose influence on cellulose supramolecular structure and material properties
Helena Nilsson et al.
CELLULOSE (2012)
Reactive dissolution of cellulose and pulp through acylation in pyridine
Sara R. Labafzadeh et al.
CELLULOSE (2012)
Low density polyethylene composites containing cellulose pulp fibers
Anamaria Sdrobis et al.
COMPOSITES PART B-ENGINEERING (2012)
Mechanisms and impact of fiber-matrix compatibilization techniques on the material characterization of PHBV/oak wood flour engineered biobased composites
Wil V. Srubar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Green composite films composed of nanocrystalline cellulose and a cellulose matrix regenerated from functionalized ionic liquid solution
Hao Ma et al.
CARBOHYDRATE POLYMERS (2011)
Green composite films prepared from cellulose, starch and lignin in room-temperature ionic liquid
Rong-Lan Wu et al.
BIORESOURCE TECHNOLOGY (2009)
The effect of the solvent on the morphology of cellulose acetate/montmorillonite nanocomposites
Rafaelle Bonzanini Romero et al.
POLYMER (2009)
Model films from native cellulose nanofibrils.: Preparation, swelling, and surface interactions
S. Ahola et al.
BIOMACROMOLECULES (2008)
The effect of fiber content on the mechanical and thermal expansion properties of biocomposites based on microfibrillated cellulose
Antonio Norio Nakagaito et al.
CELLULOSE (2008)
Effect of cross-link density on interphase creation in polymer nanocomposites
Karl W. Putz et al.
MACROMOLECULES (2008)
Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)
AP Mathew et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Swelling of model films of cellulose having different charge densities and comparison to the swelling behavior of corresponding fibers
S Fält et al.
LANGMUIR (2003)
Share Paper
