☆ 4.7 Article

Quasi-Static Multifunctional Characterization of 3D-Printed Carbon Fiber Composites for Compressive-Electrical Properties

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Composites

Investigations for tensile, compressive and morphological properties of 3D printed functional prototypes of PLA-PEKK-HAp-CS

Rupinder Singh et al.

Summary: This study reports experimental investigations on the tensile, compressive, and morphological properties of 3D printed functional prototypes composed of PLA reinforced with PEKK, HAp, and CS. The results indicate that the PLA-PEKK-HAp-CS composite has wide applications in various fields.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)

Add to Collection

Article Engineering, Manufacturing

Electrical properties of 3D printed continuous carbon fibre composites made using the FDM process

Joel Galos et al.

Summary: The study investigates the electrical conductivity of continuous carbon fiber-nylon filaments and laminates printed with an FDM machine. While the longitudinal conductivity of the 3D printed laminate is lower than that of a hot molded composite due to fiber breakages caused by the FDM process, the transverse and through-thickness electrical conductivities are higher due to increased fiber-to-fiber contact.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Polymer Science

Investigation of Carbon Nanotube Grafted Graphene Oxide Hybrid Aerogel for Polystyrene Composites with Reinforced Mechanical Performance

Yanzeng Sun et al.

Summary: A novel approach was developed for preparing large-scale 3D carbon nanotubes and graphene oxide aerogel by directly grafting CNTs onto GO, followed by backfilling styrene and polymerization to form nanocomposites. The XPS and Raman spectroscopy results confirmed the successful establishment of CNTs and GO-CNT in the aerogel. The nanocomposites exhibited excellent thermal conductivity and significantly enhanced mechanical properties compared to pristine PS, providing a new route for large-scale production.

POLYMERS (2021)

Add to Collection

Review Engineering, Manufacturing

Consolidation of continuous fibre reinforced composites in additive processes: A review

Giacomo Struzziero et al.

Summary: Additive manufacturing of continuous reinforced polymer is a focus in the composite manufacturing industry, offering a solution for high volume production and automation to expand the use of composite materials. However, challenges such as consolidation issues need to be addressed to improve quality standards. Current and future manufacturing technologies are being analyzed to meet stringent sustainability, quality, and cost standards.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Chemistry, Analytical

Electrical Properties and Strain Sensing Mechanisms in Hybrid Graphene Nanoplatelet/Carbon Nanotube Nanocomposites

Xoan F. Sanchez-Romate et al.

Summary: The electrical and electromechanical properties of hybrid graphene nanoplatelet (GNP)/carbon nanotube (CNT)-reinforced composites were analyzed under two different sonication conditions. The electrical conductivity increases with increasing nanofiller content, while the optimal sonication time decreases in a low viscosity medium. Samples with a higher GNP/CNT ratio show a higher prevalence of GNPs, with an exponential behavior of electrical resistance with applied strain and gauge factors reaching around 10.

SENSORS (2021)

Add to Collection

Article Polymer Science

An Investigation to Study the Effect of Process Parameters on the Strength and Fatigue Behavior of 3D-Printed PLA-Graphene

Anouar El Magri et al.

Summary: This paper investigates the fatigue behavior and damage analysis of 3D-printed PLA-Graphene specimens, analyzing the combined effect of process parameters, loading amplitude, and frequency. The experimental results show that fatigue lifetime depends on process parameters, loading amplitude, and frequency, and the thermal-mechanical coupling effect at 80 Hz decreases fatigue lifetime.

POLYMERS (2021)

Add to Collection

Article Polymer Science

Effect of Fibre Orientation on Novel Continuous 3D-Printed Fibre-Reinforced Composites

Ilaria Papa et al.

Summary: This study focused on manufacturing composite material laminates using the Markforged continuous filament fabrication technique with carbon nanofiber matrix infilled Onyx. Various samples were tested to evaluate the influence of fibers on mechanical properties of composites and the effect of process parameters on 3D-printed sample quality and mechanical behavior through tests such as SEM analysis, tensile and compression tests, and thermogravimetric analysis.

POLYMERS (2021)

Add to Collection

Article Mechanics

Compression properties of multifunctional composite structures with embedded lithium-ion polymer batteries

P. Attar et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Polymer Science

Mechanical and Strain-Sensing Capabilities of Carbon Nanotube Reinforced Composites by Digital Light Processing 3D Printing Technology

Alejandro Cortes et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Analytical

Development of a Multi-Material Stereolithography 3D Printing Device

Bilal Khatri et al.

MICROMACHINES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced out of Plane Electrical Conductivity in Polymer Composites Induced by CO2 Laser Irradiation of Carbon Fibers

Anastasios Karakassides et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Engineering, Manufacturing

Additive manufacturing of short fiber reinforced thermoset composites with unprecedented mechanical performance

Nashat Nawafleh et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Polymer Science

The Potential of Graphene Nanoplatelets in the Development of Smart and Multifunctional Ecocomposites

Pedro Pereira et al.

POLYMERS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Current progress on the 3D printing of thermosets

Biran Wang et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Carbon fiber reinforced structural lithium-ion battery composite: Multifunctional power integration for CubeSats

Kathleen Moyer et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

Mechanical characterization and asymptotic homogenization of 3D-printed continuous carbon fiber-reinforced thermoplastic

Thiago Assis Dutra et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

Add to Collection

Article Multidisciplinary Sciences

Volumetric additive manufacturing via tomographic reconstruction

Brett E. Kelly et al.

SCIENCE (2019)

Add to Collection

Article Engineering, Manufacturing

A novel approach for understanding laser sintering of polymers

D. Drummer et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Review Polymer Science

Advances in 3D printing of thermoplastic polymer composites and nanocomposites

Arnaldo D. Valino et al.

PROGRESS IN POLYMER SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Scalable submicrometer additive manufacturing

Sourabh K. Saha et al.

SCIENCE (2019)

Add to Collection

Review Nanoscience & Nanotechnology

Ink-based 3D printing technologies for graphene-based materials: a review

Jingfeng Wang et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Tailoring strength and modulus by 3D printing different continuous fibers and filled structures into composites

Hui Mei et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)

Add to Collection

Article Mechanics

Characterization of 3D printed long fibre reinforced composites

J. Justo et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Polymer Science

Electrical, Mechanical and Electromechanical Properties of Graphene-Thermoset Polymer Composites Produced Using Acetone-DMF Solvents

Alessandro Giuseppe D'Aloia et al.

POLYMERS (2018)

Add to Collection

Article Multidisciplinary Sciences

3D nanofabrication by volumetric deposition and controlled shrinkage of patterned scaffolds

Daniel Oran et al.

SCIENCE (2018)

Add to Collection

Article Engineering, Manufacturing

Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology

Miguel Araya-Calvo et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Article Multidisciplinary Sciences

Multi-Functional Carbon Fibre Composites using Carbon Nanotubes as an Alternative to Polymer Sizing

T. R. Pozegic et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Monitoring damage accumulation in ceramic matrix composites using electrical resistivity

Craig E. Smith et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Composites

Mechanical and electrical properties of a MWNT/epoxy composite

A Allaoui et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.