☆ 4.7 Article

Flame Retardancy and Thermal Degradation Behaviors of Thiol-Ene Composites Containing a Novel Phosphorus and Silicon-Containing Flame Retardant

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Effect of a Reactive-Type Flame Retardant on Thermal Stability of Thiol-ene Composites

Xiaohui Bao et al.

Summary: A reactive-type flame retardant, polyvinylphenylsilsesquioxane (PVP), was synthesized and incorporated into thiol-ene (TE) to prepare a flame-retardant TE (FRTE) composite. The results showed that the addition of PVP improved the thermal stability of TE in nitrogen, suggesting that PVP could promote the formation of char residue to block heat flow and delay thermal degradation of the TE matrix.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2022)

Add to Collection

Article Polymer Science

Fire Retardancy and Thermogravimetric Kinetics of Thiol-Ene Degradation as Affected by Added 9,10-Dihydro-9-Oxa-10-Phosphaphenanthrene-10-Oxide (DOPO)

Shiqi Chen et al.

Summary: The addition of the fire retardant DOPO significantly enhanced the fire retardancy of thiol-ene polymer, reducing the peak heat release rate and total heat release compared to pure PTE. The activation energies of the fire retardant PTE were lower than those of pure PTE, indicating improved thermal stability and fire retardancy.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2022)

Add to Collection

Article Polymer Science

Design and optimization of polymerization parameters of carboxymethyl chitosan and sodium 2-acrylamido-2-methylpropane sulfonate hydrogels as wound dressing materials

Wichaya Kalaithong et al.

Summary: The research focused on synthesizing, characterizing, and testing the properties of hydrogel wound dressings. The study was divided into two main parts, the synthesis and characterization of CMCTS, and the preparation of hydrogels composed of Na-AMPS and different compositions of CMCTS with varying concentrations of PEGDA (crosslinker).

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Polymer Science

Mechanism Identification and Kinetics Analysis of Thermal Degradation for Carbon Fiber/Epoxy Resin

Han Li et al.

Summary: The study investigates the thermal degradation mechanism and kinetics of carbon fiber epoxy resin used in aerostructures, analyzing the process under different environments and establishing a kinetic model. Results show differences in thermal degradation steps under inert atmosphere and air atmosphere, providing fundamental support for the application of carbon fiber epoxy resin in the aircraft industry.

POLYMERS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

An injectable, dual crosslinkable hybrid pectin methacrylate (PECMA)/ gelatin methacryloyl (GelMA) hydrogel for skin hemostasis applications

Jing-Han Wang et al.

Summary: The newly developed PECMA/GelMA hybrid hydrogel has tunable properties, good cytocompatibility, and can synergize to achieve rapid hemostatic effects.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Polymer Science

UV-irradiation polymerization of bis-EDOT methane derivatives and their application for Br2 detection

Junning Qian et al.

Summary: Researchers synthesized two new types of poly(bis-EDOT methane) derivatives through a novel method and confirmed the polymerization processes using various techniques. They discovered the significant role of C/C contact distance in UV-assisted polymerization, suggesting a promising future for the development of this polymerization method. Additionally, they successfully applied the prepared polymers as chemosensors for Br-2 detection.

POLYMER (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Synthesis and characterization of flame-retardant-wrapped carbon nanotubes and its flame retardancy in epoxy nanocomposites

Jiangbo Wang

Summary: The study focused on wrapping carbon nanotubes with the novel phosphorus-silicon containing flame-retardant DOPO-V-PA, and incorporating them into epoxy resin to enhance flame retardancy and dispersion. The nanocomposites showed improved flame retardancy with a reduction in peak heat release rate (PHRR) and total heat release (THR), as well as better dispersion of CNTs-DOPO-V-PA in the EP matrix compared to pristine CNTs.

POLYMERS & POLYMER COMPOSITES (2021)

Add to Collection

Article Polymer Science

Role of thiol oxidation by air in the mechanism of the self-initiated thermal thiol-ene polymerization

Cuong Minh Quoc Le et al.

Summary: This study demonstrates the significant role of thiyl radicals produced by thiol oxidation in driving the spontaneous thiol-ene polymerization in the absence of solvents, heating, and intentional radical formation. Factors influencing reactivity, kinetics, solvation of thiols, and nature of initiating radicals were studied through various techniques, showing that the polarization of S-H bond drives thiol air oxidation. Thiols with electron-withdrawing substituents and hydrogen-bonded thiol-solvent (or thiol-alkene) complexes promote self-initiation by increasing S-H bond polarization.

POLYMER CHEMISTRY (2021)

Add to Collection

Article Polymer Science

Kinetics and Thermodynamics of Thermal Degradation of Different Starches and Estimation the OH Group and H2O Content on the Surface by TG/DTG-DTA

Marita Piglowska et al.

POLYMERS (2020)

Add to Collection

Article Polymer Science

A novel phosphorus-silicon containing epoxy resin with enhanced thermal stability, flame retardancy and mechanical properties

Jialiang Li et al.

POLYMER DEGRADATION AND STABILITY (2019)

Add to Collection

Article Engineering, Chemical

Biobased Ester 2-(10-Undecenoyloxy)ethyl Methacrylate as an Asymmetrical Diene Monomer in Thiol-Ene Polymerization

Cristian de Oliveira Romera et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Polymer Science

Preparation and Properties of Thiol-ene UV-cured Nanocomposites with Methacrylate-grafted Cellulose Nanocrystals as Fillers

JuHyung Lee et al.

POLYMER-KOREA (2019)

Add to Collection

Article Chemistry, Analytical

One-step fabrication of cinchona-based hybrid monolithic chiral stationary phases via photo-initiated thiol-ene polymerization for cLC enantioseparation

Shujuan Ma et al.

TALANTA (2019)

Add to Collection

Article Polymer Science

Flame Retardancy and Mechanism of Novel Phosphorus-Silicon Flame Retardant Based on Polysilsesquioxane

Shengjie Zhu et al.

POLYMERS (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Chitosan-based hydrogels prepared by UV polymerization for wound dressing

Han-Yun Yao et al.

POLYMERS & POLYMER COMPOSITES (2019)

Add to Collection

Article Thermodynamics

Synergistic effects between silicon-containing flame retardant and DOPO on flame retardancy of epoxy resins

Le Zhang et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Add to Collection

Article Thermodynamics

Study of PET fibres modified with phosphorus-silicon retardants

Andrzej Gawlowski et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Add to Collection

Article Polymer Science

Novel phosphorus-nitrogen-silicon flame retardants and their application in cycloaliphatic epoxy systems

Pengjie Chao et al.

POLYMER CHEMISTRY (2015)

Add to Collection

Article Engineering, Environmental

Enhanced thermal and mechanical properties of functionalized graphene/thiol-ene systems by photopolymerization technology

Bin Yu et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Add to Collection

Article Thermodynamics

Preparation and thermal stability of UV-cured epoxy-based coatings modified with octamercaptopropyl POSS

Xiaofeng Wang et al.

THERMOCHIMICA ACTA (2013)

Add to Collection

Article Engineering, Chemical

Thermal Properties of Novel 9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-Oxide-based Organic/Inorganic Hybrid Materials Prepared by Sol-Gel and UV-Curing Processes

Xiaodong Qian et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Add to Collection

Article Polymer Science

Synthesis and characterization of P/Si flame retardant and its application in epoxy systems

Nianjun Kang et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2012)

Add to Collection

Review Chemistry, Applied

Preparation and characterization of boron containing thiol-ene photocured hybrid coatings

Emrah Cakmakci et al.

PROGRESS IN ORGANIC COATINGS (2012)

Add to Collection

Article Engineering, Chemical

Multifunctional thiols as additives in UV-cured PEG-diacrylate membranes for CO2 separation

Luke Kwisnek et al.

JOURNAL OF MEMBRANE SCIENCE (2011)

Add to Collection

Article Chemistry, Applied

Flame retardant thiol-ene photocured coatings

Emrah Cakmakci et al.

REACTIVE & FUNCTIONAL POLYMERS (2011)

Add to Collection

Article Polymer Science

Facile polyisobutylene functionalization via thiol-ene click chemistry

Andrew J. D. Magenau et al.

POLYMER CHEMISTRY (2010)

Add to Collection

Article Polymer Science

Oxygen Transport Properties of Thiol-Ene Networks

Luke Kwisnek et al.

MACROMOLECULES (2009)

Add to Collection

Review Chemistry, Applied

Synthesis and characterization of UV-curable dual hybrid oligomers based on epoxy acrylate containing pendant alkoxysilane groups

Gulay Bayramoglu et al.

PROGRESS IN ORGANIC COATINGS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.