☆ 4.7 Article

Improvement of Gas Barrier Properties for Biodegradable Poly(butylene adipate-co-terephthalate) Nanocomposites with MXene Nanosheets via Biaxial Stretching

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Food Science & Technology

Morphology and permeability of bio-based poly(butylene adipate-co-terephthalate) (PBAT), poly(butylene succinate) (PBS) and linear low-density polyethylene (LLDPE) blend films control shelf-life of packaged bread

Nattinee Bumbudsanpharoke et al.

Summary: Blending PBAT and PBS modified the morphology and permeability of bio-based films, while blending with LLDPE resulted in incompatibility. LLDPE/PBAT films had lower T-alpha than neat PBAT and LLDPE, while T-alpha of PBAT/PBS blends decreased with increasing PBS content, indicating diverse polymer compatibility and molecular mobility.

FOOD CONTROL (2022)

Add to Collection

Article Agricultural Engineering

Plasticized hydroxypropyl cassava starch blended PBAT for improved clarity blown films: Morphology and properties

Kiattichai Wadaugsorn et al.

Summary: Blending of plasticized hydroxypropyl cassava thermoplastic starch (TPS) with polybutylene adipate terephthalate (PBAT) via blown-film extrusion was studied. Higher DS values were found to increase film clarity and glossy surface, reduce crystallinity, improve hydrophilicity, mechanical properties and compatibility between PBAT and TPS. Modified DS in hydroxypropyl starch efficiently improved clarity, mechanical and barrier properties of bioplastic packaging.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Surface decoration of Halloysite nanotubes with POSS for fire-safe thermoplastic polyurethane nanocomposites

Wei Wu et al.

Summary: In this study, POSS containing amino group was covalently grafted on the surface of HNTs, leading to the uniform dispersion of modified HNTs in TPU matrix and significantly improved tensile properties and fire safety of TPU nanocomposites. The addition of HNTs-POSS effectively reduced heat release rate and smoke release, forming a continuous and compact char layer that hindered heat diffusion and evaporation of volatile gases, ultimately enhancing the fire safety of TPU nanocomposites.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Reactive extrusion of biodegradable PGA/PBAT blends to enhance flexibility and gas barrier properties

Christopher Ellingford et al.

Summary: In this study, PGA was modified by blending with PBAT and EMA-GMA, resulting in improved mechanical properties, oxygen and water vapor barrier performance. The compatibilized PGA/PBAT blends with high thermal stability are suitable for high temperature or hot food packaging.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Nanoengineering of 2D MXene-Based Materials for Energy Storage Applications

Jianxiao Nan et al.

Summary: 2D MXene-based nanomaterials have unique properties and applications, but face limitations in energy storage. Nanoengineering of these materials is being extensively studied to enhance performance in energy storage applications. Research on MXene-based nanostructures for energy storage is discussed, highlighting preparation methods, properties, and applications in lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, and supercapacitors. Challenges and perspectives for future development in this field are also addressed.

SMALL (2021)

Add to Collection

Article Engineering, Environmental

Engineering MXene surface with POSS for reducing fire hazards of polystyrene with enhanced thermal stability

Bin Yu et al.

Summary: A facile strategy was reported for surface manipulation of Ti3C2Tx with AP-POSS, resulting in POSS-Ti3C2Tx that showed significantly improved thermal and flame retardant properties when incorporated into PS nanocomposites. The outstanding fire safety was attributed to the combination of adsorption, catalytic and barrier effects of POSS-Ti3C2Tx, making it attractive for wide potential applications.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Biodegradable and renewable UV-shielding polylactide composites containing hierarchical structured POSS functionalized lignin

Xianwu Cao et al.

Summary: This study functionalized biobased lignin with POSS to prepare PLA composite films with superior UV-shielding performance and transparency, providing a new pathway for the preparation of biodegradable and renewable UV-shielding materials.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Relationship between microstructure and performances of simultaneous biaxially stretched films based on thermoplastic starch and biodegradable polyesters

Rangrong Yoksan et al.

Summary: The aim of the study was to improve the performance of PLA/TPS blends by simultaneous biaxial stretching and partially replacing PLA, and the stretched films showed significantly enhanced mechanical and barrier properties, with the potential to replace non-biodegradable plastic packaging films.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Chemistry, Physical

Synergistic enhancement of gas barrier and aging resistance for biodegradable films with aligned graphene nanosheets

Jiaxu Li et al.

Summary: A method was reported to prepare PBAT nanocomposite films with aligned graphene nanosheets by combining biaxial orientation and rod scarping, showing significant improvement in water vapor and oxygen permeability. The composite films could serve as an important strategy for sustainable packaging and agricultural films.

CARBON (2021)

Add to Collection

Article Polymer Science

Biodegradable Poly(butylene adipate-co-terephthalate) Antibacterial Nanocomposites Reinforced with MgO Nanoparticles

Xionggang Wang et al.

Summary: Magnesium oxide nanoparticles modified with cetrimonium bromide can be used as an additive in antibacterial packaging materials to improve thermal stability and tensile strength. However, high loading of MgO@CTAB may lead to aggregation, affecting the material performance.

POLYMERS (2021)

Add to Collection

Article Materials Science, Composites

Surface treatment of two dimensional MXene for poly(vinylidene fluoride) nanocomposites with tunable dielectric permittivity

Wei Wu et al.

Summary: Dielectric polymer nanocomposites with high dielectric permittivity and low dielectric loss are crucial for energy storage applications. In this study, PVDF/MXene nanocomposites with enhanced dispersion and compatibility were successfully prepared. The addition of MXene@CTAB contributed to improved dielectric properties and potential applications in energy storage devices for electronics.

COMPOSITES COMMUNICATIONS (2021)

Add to Collection

Article Polymer Science

Superior Gas Barrier Properties of Biodegradable PBST vs. PBAT Copolyesters: A Comparative Study

Pengkai Qin et al.

Summary: Comparative study of gas barrier properties between PBST and PBAT revealed that PBST exhibited superior barrier properties for O-2 and CO2 due to its slower segment movement and less free volume, while its improvement in water vapor barrier was limited by its better hydrophilicity countering the partial contribution of slower segment movement.

POLYMERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrathin MXene/Polymer Coatings with an Alternating Structure on Fabrics for Enhanced Electromagnetic Interference Shielding and Fire-Resistant Protective Performances

Chuntao Lan et al.

Summary: In this study, a MXene/insulative polymer coating with an alternating structure was fabricated via a stepwise assembly technique, achieving an enhancement of EMI SE and retention of fabric flexibility and air permeability. This novel coating strategy effectively improves dielectrical properties and triggers multiple reflections of electromagnetic waves, leading to the enhancement of EMI SE.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Composites

Lightweight and elastic wood-derived composites for pressure sensing and electromagnetic interference shielding

Zhen-xing Wang et al.

Summary: This study developed a high-performance and multifunctional wearable flexible material inspired by the structure of natural wood. The composite material exhibited excellent mechanical properties, electromagnetic interference shielding performance, and sensor capabilities, suitable for various commercial applications, with improved durability for daily use through the use of a PDMS protective layer.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Highly transparent biaxially oriented poly(ester amide) film with improved gas barrier properties and good mechanical strength

Hongwei Gao et al.

Summary: A high-performance biaxially oriented PET film (BOPETA) is prepared by incorporating 4 mol% amide units formed by 1,12-dodecanediamine and terephthalic acid, which enhances interchain forces through the formation of hydrogen bonds. The BOPETA film exhibits improved crystallinity and mechanical properties, as well as lower water and oxygen permeabilities compared to BOPET. Additionally, the optical properties of the BOPETA film remain good after incorporating amide units, with a light transmittance of 88.8% and slight anti-UV performance. This work discusses a simple approach for preparing PET films with good mechanical strength, high transparency, and improved gas barrier properties for packaging.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Review Polymer Science

Challenges and new opportunities on barrier performance of biodegradable polymers for sustainable packaging

Feng Wu et al.

Summary: Biodegradable polymers have attracted significant attention due to their environmentally friendly compostability. However, challenges remain for their practical application in packaging, particularly in addressing gas/moisture barrier issues. Various strategies have been researched for decades to overcome these challenges, such as chain architecture tailoring, crystallinity, melt blending/multi-layer co-extrusion, nanotechnology, and surface coating. This review focuses on improving the oxygen/water vapor barrier properties of biodegradable polymers and discusses the limitations of current methods and potential solutions.

PROGRESS IN POLYMER SCIENCE (2021)

Add to Collection

Article Polymer Science

A Study on the Oxygen Permeability Behavior of Nanoclay in a Polypropylene/Nanoclay Nanocomposite by Biaxial Stretching

Bich-Nam Jung et al.

Summary: In this study, PP/nanoclay nanocomposites were prepared by biaxial stretching method, which showed improved oxygen barrier properties with increased draw ratio and nanoclay content, resulting in a reduced oxygen permeability value of 43.5 cc center dot mm/m(2)center dot day center dot atm. The composite also exhibited stable oxygen permeability values under increased relative humidity, along with enhanced mechanical and thermal properties. The biaxially-stretched PP/nanoclay nanocomposite shows potential as a replacement for multi-layered packaging materials.

POLYMERS (2021)

Add to Collection

Article Polymer Science

PBAT Based Composites Reinforced with Microcrystalline Cellulose Obtained from Softwood Almond Shells

Luigi Botta et al.

Summary: This study investigated the processability, mechanical, and thermal properties of biocompostable composites using MCC particles derived from almond shells as fillers for PBAT matrix. The fibrillar shape of as-MCC particles significantly affected the rheological behavior of PBAT, showing potential as a filler for biocompostable composites.

POLYMERS (2021)

Add to Collection

Article Food Science & Technology

Potential of extrusion-blown poly(lactic acid)/cellulose nanocrystals nanocomposite films for improving the shelf-life of a dry food product

Sonal S. Karkhanis et al.

Summary: The study demonstrated that crackers packaged in PLA/CNC films had a longer shelf-life compared to those packaged in neat PLA films, especially performing better in high-humidity environments.

FOOD PACKAGING AND SHELF LIFE (2021)

Add to Collection

Review Chemistry, Physical

MXene/Polymer Membranes: Synthesis, Properties, and Emerging Applications

Lingfeng Gao et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Polymer Science

Micromorphology, mechanical, crystallization and permeability properties analysis of HA/PBAT/PLA (HA, hydroxyapatite; PBAT, poly(butylene adipate-co-butylene terephthalate); PLA, polylactide) degradability packaging films

Qianru Yao et al.

POLYMER INTERNATIONAL (2020)

Add to Collection

Review Engineering, Environmental

MXenes (two-dimensional metal carbides) as emerging nanomaterials for water puri fication: Progress, challenges and prospects

Ihsanullah Ihsanullah

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Potential of MXenes in Water Desalination: Current Status and Perspectives

Ihsanullah Ihsanullah

NANO-MICRO LETTERS (2020)

Add to Collection

Article Polymer Science

Facile Synthesis of Phosphorus and Cobalt Co-Doped Graphitic Carbon Nitride for Fire and Smoke Suppressions of Polylactide Composite

Xianwu Cao et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Economically Competitive Biodegradable PBAT/Lignin Composites: Effect of Lignin Methylation and Compatibilizer

Shao-Jun Xiong et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Polymer Science

PBAT green composites: Effects of kraft lignin particles on the morphological, thermal, crystalline, macro and micromechanical properties

Hanieh Kargarzadeh et al.

POLYMER (2020)

Add to Collection

Article Polymer Science

Sulfonated biodegradable PBAT copolyesters with improved gas barrier properties and excellent water dispersibility: From synthesis to structure-property

Fangfang Huang et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Study on the properties of PLA/PBAT composite modified by nanohydroxyapatite

Dongsheng Yan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Engineering, Multidisciplinary

Creating MXene/reduced graphene oxide hybrid towards highly fire safe thermoplastic polyurethane nanocomposites

Chuan Liu et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

The Contribution of Magnetic Nanoparticles to Ferrogel Biophysical Properties

Felix A. Blyakhman et al.

NANOMATERIALS (2019)

Add to Collection

Article Polymer Science

Improving the barrier properties of a biodegradable polyester for packaging applications

Ainara Sangroniz et al.

EUROPEAN POLYMER JOURNAL (2019)

Add to Collection

Article Polymer Science

Synergistic Effects of Two-Dimensional MXene and Ammonium Polyphosphate on Enhancing the Fire Safety of Polyvinyl Alcohol Composite Aerogels

Xinxin Sheng et al.

POLYMERS (2019)

Add to Collection

Article Engineering, Chemical

Dynamics and structure development for biaxial stretching PA6/MXD6 blend packaging films

Toshitaka Kanai et al.

ADVANCES IN POLYMER TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancement of Water Vapor Barrier Properties of Biodegradable Poly(butylene adipate-co-terephthalate) Films with Highly Oriented Organomontmorillonite

Jiaxu Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Polymer Science

ZnO/PBAT nanocomposite films: Investigation on the mechanical and biological activity for food packaging

Raja Venkatesan et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2017)

Add to Collection

Article Materials Science, Characterization & Testing

Biodegradable graphene oxide nanosheets/poly-(butylene adipate-coterephthalate) nanocomposite film with enhanced gas and water vapor barrier properties

Peng-Gang Ren et al.

POLYMER TESTING (2017)

Add to Collection

Review Nanoscience & Nanotechnology

2D metal carbides and nitrides (MXenes) for energy storage

Babak Anasori et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Conductive Transition Metal Carbide/Carbonitride(MXene)@polystyrene Nanocomposites Fabricated by Electrostatic Assembly for Highly Efficient Electromagnetic Interference Shielding

Renhui Sun et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation, mechanical and anti-friction performance of MXene/polymer composites

Heng Zhang et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Polymer Science

Antimicrobial Activity and Biodegradation Behavior of Poly(butylene adipate-co-terephthalate)/Clay Nanocomposites

Dibyendu Mondal et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Add to Collection

Article Materials Science, Composites

Morphology, thermal, and mechanical properties of poly(butylene succinate) reinforced with halloysite nanotube

Wei Wu et al.

POLYMER COMPOSITES (2014)

Add to Collection

Article Polymer Science

Dynamic mechanical thermal analysis of biocomposites based on PLA and PHBV-A comparative study to PP counterparts

Adam Jaszkiewicz et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Article Polymer Science

Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy

Racha Al-Itry et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Progress in research and development on MAX phases: a family of layered ternary compounds

Z. M. Sun

INTERNATIONAL MATERIALS REVIEWS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.