☆ 4.7 Article

Novel 3D Bioglass Scaffolds for Bone Tissue Regeneration

POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Biomaterials

Shape fidelity, mechanical and biological performance of 3D printed polycaprolactone-bioactive glass composite scaffolds

Raul Vallejos Baier et al.

Summary: This study evaluated the feasibility of using DIW to fabricate PCL-BG composite-based 3D scaffolds of finite size. The results showed that the fabricated scaffolds had high geometric reproducibility and adaptability, but further improvement of mechanical and biological properties is needed.

BIOMATERIALS ADVANCES (2022)

Add to Collection

Article Critical Care Medicine

Differentially expressed microRNAs as diagnostic biomarkers for infected tibial non-union

Yan Dai et al.

Summary: MiR-649, miR-328-5p, and miR-345-3p have been identified as novel candidate biomarkers for the diagnosis of infected tibial non-union, showing promising diagnostic accuracy with an AUC of 0.953 when used in combination. These differentially expressed miRNAs could be potential diagnostic and therapeutic tools for identifying and treating infected tibial non-union.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Structure and formation of amorphous calcium phosphate and its role as surface layer of nanocrystalline apatite: Implications for bone mineralization

Mattias Eden

Summary: This review provides an in-depth analysis of the chemical composition and structure of synthetic and biogenic nanocrystalline hydroxy-carbonate apatite (HCA), highlighting the core-shell organization and the role of the surface layer. Despite decades of research, several unresolved issues and controversies remain in this field.

MATERIALIA (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications

Xiaoyan Xu et al.

Summary: Vat photo-polymerization 3D printing technology offers high resolution and fast printing speeds, making it ideal for creating custom medical devices and drug delivery systems. Its adoption is expected to advance personalized healthcare systems.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Article Materials Science, Ceramics

Rational design of bioceramic scaffolds with tuning pore geometry by stereolithography: Microstructure evaluation and mechanical evolution

Fengling Lu et al.

Summary: The pore geometry of Ca-silicate bioceramic scaffolds significantly influences their structural strength, with different pore shapes showing varying compressive and flexural resistance. The relationship between pore structure and mechanical properties can be controlled through design to tailor scaffold bio-dissolution, demonstrating the potential for optimizing porous bioceramic designs for required structural and mechanical stability.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Biophysics

Fabrication of polylactic acid (PLA)-based porous scaffold through the combination of traditional bio-fabrication and 3D printing technology for bone regeneration

Xiaqing Zhou et al.

Summary: Artificial bone grafts offer advantages in promoting cell proliferation and differentiation in bone tissue regeneration, while using 3D printing technology combined with bio-fabrication methods to prepare porous spiral scaffolds can significantly improve cell growth and differentiation.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

Add to Collection

Article Materials Science, Ceramics

Effects of pore size on the mechanical and biological properties of stereolithographic 3D printed HAp bioceramic scaffold

Ruoxi Liu et al.

Summary: This study investigated the effects of pore size on mechanical and biological properties of hydroxyapatite (HAp) scaffolds prepared by stereolithographic 3D printing. Results showed that the scaffold with a pore size of 600 µm had the most promising application prospect.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

3D printing of PLA/n-HA composite scaffolds with customized mechanical properties and biological functions for bone tissue engineering

Wenzhao Wang et al.

Summary: This study utilized 3D printing technology to fabricate composite scaffolds of PLA and n-HA, and demonstrated their potential for large bone defect repair through biocompatibility and in vivo implantation tests.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Review Biochemistry & Molecular Biology

A Review of Recent Developments in the Molecular Mechanisms of Bone Healing

Emerito Carlos Rodriguez-Merchan

Summary: This article reviews recent findings on the molecular mechanisms of bone healing and presents various biological alternatives for treating recalcitrant nonunions, such as using morin, BMP9, and leptin. It also discusses factors that impact bone regeneration, including inhibition of estrogen receptor signaling, smoking-induced inflammatory responses, and delayed fracture healing in diabetic animals due to BMP6 deficiency. The combination of bioceramics and expanded autologous human mesenchymal stem cells from bone marrow is highlighted as a promising alternative for treating nonunions that do not respond well to traditional treatments.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering

Maurice N. Collins et al.

Summary: Bone tissue engineering aims to create biofunctional tissue for treating diseases, with scaffold fabrication techniques and biomaterial selection being crucial. Vascularization and immunomodulation are major challenges in this field.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Engineering, Biomedical

A comparison of rib cortical bone compressive and tensile material properties: Trends with age, sex, and loading rate

Devon L. Albert et al.

Summary: This study aimed to develop novel methods for quantifying human rib cortical bone material properties in compression and compared them to existing tensile data. Results showed differences in compressive material properties between loading rates and no significant correlation with age, but a correlation with sample density. Rib and thorax finite element models should consider loading rate, loading mode, and age when incorporating material properties.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

High solid content 45S5 bioglass (R)-based scaffolds using stereolithographic ceramic manufacturing: process, structural and mechanical properties

Zhiyong Ma et al.

Summary: The study utilized the SLCM method to fabricate 45S5 Bioglass-based scaffolds, improving the solid content, reducing linear shrinkage, and enhancing compressive strength through optimization of process parameters.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Fabrication and properties of alginate-hydroxyapatite biocomposites as efficient biomaterials for bone regeneration

Connie Ocando et al.

Summary: Covalently crosslinked alginate and alginate/Mg-doped hydroxyapatite hydrogels fabricated by click chemistry mimic highly porous structures suitable for osseous tissue regeneration, with a uniform dispersion of bioactive MgHAp nanoparticles for pre-osteoblast cell attachment and proliferation.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Engineering, Biomedical

Synergistic anti-inflammatory and osteogenic n-HA/resveratrol/chitosan composite microspheres for osteoporotic bone regeneration

Limei Li et al.

Summary: This study developed nano-hydroxyapatite/resveratrol/chitosan composite microspheres for promoting bone formation and inflammation reduction. The controlled release of resveratrol improved cell adhesion, proliferation, and osteogenic differentiation, leading to enhanced bone regeneration and fracture healing in osteoporotic conditions, indicating promising multifunctional fillers for osteoporotic bone defect/fracture treatment.

BIOACTIVE MATERIALS (2021)

Add to Collection

Article Biology

Composite Scaffolds for Bone Tissue Regeneration Based on PCL and Mg-Containing Bioactive Glasses

Mauro Petretta et al.

Summary: In this study, 3D-printed PCL scaffolds reinforced with Mg-doped bioactive glass were developed, showing improved mechanical properties and biological reactivity for bone tissue engineering applications. The composite scaffolds demonstrated high biocompatibility, bioactivity, and cell adhesion, making them promising for promoting cell viability and supporting mechanical loading in trabecular bone.

BIOLOGY-BASEL (2021)

Add to Collection

Review Engineering, Biomedical

Advances in bioactive glass-containing injectable hydrogel biomaterials for tissue regeneration

Ehsan Zeimaran et al.

Summary: Injectable composite hydrogels based on biodegradable polymers and bioactive glasses have gained attention in tissue engineering. These hydrogels combine the advantages of their constituents to provide tailored mechanical properties and biological functionalities.

ACTA BIOMATERIALIA (2021)

Add to Collection

Review Engineering, Biomedical

Recent advances in PLGA-based biomaterials for bone tissue regeneration

Shue Jin et al.

Summary: Bone regeneration is a complex interdisciplinary field that involves materials science, biomechanics, immunology, and biology. PLGA, with its good biocompatibility and adjustable biodegradability, has been widely used in bone tissue engineering. This review systematically covers the past and recent advances in developing PLGA-based bone regeneration materials, focusing on different application forms, advantages, and disadvantages.

ACTA BIOMATERIALIA (2021)

Add to Collection

Review Pharmacology & Pharmacy

Advances in powder bed fusion 3D printing in drug delivery and healthcare

Atheer Awad et al.

Summary: Powder bed fusion (PBF) is a 3D printing method that selectively consolidates powders into 3D objects using a power source. PBF technologies offer benefits such as superior printing resolution and speed, as well as the ability to create complex products without the need for secondary supports, making them well suited for bespoke drug-laden formulations, devices, and implants.

ADVANCED DRUG DELIVERY REVIEWS (2021)

Add to Collection

Article Engineering, Biomedical

Immunopolarization-regulated 3D printed-electrospun fibrous scaffolds for bone regeneration

Xingzhi Liu et al.

Summary: 3D-printed bioscaffolds can be designed to modulate the immune response in vivo and enhance bone formation by regulating M2 macrophage polarization.

BIOMATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Highly bioactive peptide-HA photo-crosslinking hydrogel for sustained promoting bone regeneration

Ruixue Li et al.

Summary: A novel peptide hydrogel (HA-c-CGRP) was constructed in this study, which sustained release highly bioactive CGRP and promoted BMSCs proliferation and osteoblast differentiation. The cocrosslinking HA-c-CGRP hydrogel accelerated new bone formation process with the highly bioactive peptide, showing promising prospect for healing defected bone tissue.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Materials Science, Composites

Polymer-based filament feedstock for additive manufacturing

Soyeon Park et al.

Summary: Fused deposition modeling (FDM) is a manufacturing method based on polymer melting and extrusion, which has attracted attention in various fields. Understanding the properties and behavior of polymer systems is crucial for using polymer composite materials in manufacturing and printing, and plays a key role in advancing additive manufacturing.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Critical Care Medicine

Treatment of femur pseudoarthrosis using wave plate: Evaluation of consolidation and its relationship with graft type

Oliver Ulson et al.

Summary: The wave plate technique is effective in treating femoral pseudoarthrosis, promoting bone healing and consolidation from the cortical bone failure zone.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Effect of Washing Treatment on the Textural Properties and Bioactivity of Silica/Chitosan/TCP Xerogels for Bone Regeneration

Antonio Perez-Moreno et al.

Summary: Silica/biopolymer hydrogel-based materials are attractive for biomedical applications, especially for bone repair. This study introduced a synthesis method for silica-chitosan-tricalcium phosphate xerogels and investigated the effects of washing solvents and TCP content. It was found that ethanol-washed samples released both calcium and silicon ions, while water-washed samples only released silicon ions. All samples showed in vitro bioactivity and promoted cell growth.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Add to Collection

Article Pharmacology & Pharmacy

Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

Martin Spoerk et al.

Summary: Material extrusion-based additive manufacturing, commonly known as 3D printing, is considered crucial for personalized medical treatment. This study demonstrates the potential of utilizing 3D printing to customize vaginal inserts with complex structures, known as urethra pessaries, and adjusting their mechanical properties to relieve symptoms of urinary incontinence. The 3D-printed pessaries not only provide a viable alternative to commercial products, but also have the potential to effectively treat diverse patient groups, making pessary therapy accessible to every woman.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Review Chemistry, Physical

Foam Replica Method in the Manufacturing of Bioactive Glass Scaffolds: Out-of-Date Technology or Still Underexploited Potential?

Elisa Fiume et al.

Summary: The foam replica method is recognized as a valuable technology for producing highly porous bioactive glass scaffolds that mimic natural trabecular bone structures. However, the high operator-dependency of the manufacturing process limits its scalability to industrial production and application in bone defect management.

MATERIALS (2021)

Add to Collection

Article Food Science & Technology

Impact of Phytochemicals on Viability and Cereulide Toxin Synthesis in Bacillus cereus Revealed by a Novel High-Throughput Method, Coupling an AlamarBlue-Based Assay with UPLC-MS/MS

Markus Kranzler et al.

Summary: Due to concerns about food poisoning, Bacillus cereus has been studied in relation to its potential risks. Scientists tested a range of plant-based chemicals and found some that could inhibit the growth of B. cereus and the production of cereulide toxin at very low concentrations.

TOXINS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The optimal microarchitecture of 3D-printed β-TCP bone substitutes for vertical bone augmentation differs from that for osteoconduction

Chafik Ghayor et al.

Summary: The study evaluated the impact of different pore-based microarchitectures on vertical bone augmentation and osteoconduction. Results showed that increasing pore diameter was positively correlated with the extent of vertical bone augmentation, with microarchitecture having a more significant impact on osteoconduction.

MATERIALS & DESIGN (2021)

Add to Collection

Article Multidisciplinary Sciences

Biomaterials with structural hierarchy and controlled 3D nanotopography guide endogenous bone regeneration

Shixuan Chen et al.

Summary: This study describes a class of 3D nanofiber scaffolds with hierarchical structure and controlled alignment for effective endogenous cranial bone regeneration. The radially aligned nanofibers in the scaffolds promoted the migration of bone marrow stem cells, resulting in the highest new bone volume, surface coverage, and mineral density among the tested groups in vivo. The regenerated bone exhibited a radially aligned fashion and showed a densely packed structure in the organic phase and a uniform distribution with smaller pore size in the inorganic mineral phase.

SCIENCE ADVANCES (2021)

Add to Collection

Article Pharmacology & Pharmacy

Medicated Hydroxyapatite/Collagen Hybrid Scaffolds for Bone Regeneration and Local Antimicrobial Therapy to Prevent Bone Infections

Manuela Mulazzi et al.

Summary: This study designed and investigated a medicated osteoinductive and bioresorbable bone graft to control antibiotic drug release in situ for the eradication or prevention of infection, while simultaneously repairing bone defects. Microbiological and in vitro tests showed that the MgHA/Coll scaffolds were safe and effective in prolonging therapy duration, promising results for the prevention of bone defect-related infections in orthopedic surgeries.

PHARMACEUTICS (2021)

Add to Collection

Article Engineering, Manufacturing

Microstructures and properties of 45S5 bioglass® & BCP bioceramic scaffolds fabricated by digital light processing

Shuai-Bin Hua et al.

Summary: The research focuses on manufacturing porous bioceramic scaffolds with favorable mechanical properties and good bioactivity using a combination of 45S5 bioglass and BCP. By optimizing the solid loading and exposure energy, scaffolds with desired pore sizes and compressive strength can be successfully fabricated. The bioglass plays a crucial role in enhancing compressive strength and promoting the growth of ceramic grains in the scaffolds.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Engineering, Biomedical

Investigating the Influence of Architecture and Material Composition of 3D Printed Anatomical Design Scaffolds for Large Bone Defects

Evangelos Daskalakis et al.

Summary: This study explores a novel osseointegrated prosthetic solution using modular bone bricks, investigating the impact of different architectures and material compositions on the performance of the prosthesis. Results showed that reinforced bone bricks with specific filament patterns exhibited improved mechanical and biological properties, with the best outcomes achieved with certain combinations of materials and structures.

INTERNATIONAL JOURNAL OF BIOPRINTING (2021)

Add to Collection

Article Cell & Tissue Engineering

EFFECT OF EXTRACELLULAR MATRIX AND DENTAL PULP STEM CELLS ON BONE REGENERATION WITH 3D PRINTED PLA/HA COMPOSITE SCAFFOLDS

I. Gendviliene et al.

Summary: The study evaluated bone regeneration using a critical-size rat's calvarial defect model, finding comparable bone-forming ability between Bio-Oss and PLA/HA ECM scaffolds, with significant differences between cellularised PLA/HA and PLA/HA ECM groups in female rats. Further research on the effects of ECM and PLA/HA ratio on osteoregeneration is needed.

EUROPEAN CELLS & MATERIALS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Evaluation of 3D Printed Gelatin-Based Scaffolds with Varying Pore Size for MSC-Based Adipose Tissue Engineering

Liesbeth Tytgat et al.

MACROMOLECULAR BIOSCIENCE (2020)

Add to Collection

Article Materials Science, Biomaterials

Aligned multi-walled carbon nanotubes with nanohydroxyapatite in a 3D printed polycaprolactone scaffold stimulates osteogenic differentiation

Boyang Huang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental and numerical investigation of polymethyl methacrylate scaffolds for bone tissue engineering

Masoud Shirzad et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2020)

Add to Collection

Review Pharmacology & Pharmacy

Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective

Mohammad A. Azad et al.

PHARMACEUTICS (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Fabrication and Application of a 3D-Printed Poly-ε-Caprolactone Cage Scaffold for Bone Tissue Engineering

Siyi Wang et al.

BIOMED RESEARCH INTERNATIONAL (2020)

Add to Collection

Review Chemistry, Physical

The Impact of Bioceramic Scaffolds on Bone Regeneration in Preclinical In Vivo Studies: A Systematic Review

Giulia Brunello et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Biomaterials

Drug-eluting PCL/graphene oxide nanocomposite scaffolds for enhanced osteogenic differentiation of mesenchymal stem cells

Fatemeh Rostami et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Engineering, Manufacturing

Tailoring polypropylene for extrusion-based additive manufacturing

Minde Jin et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Pharmacology & Pharmacy

Screening of pharmaceutical polymers for extrusion-Based Additive Manufacturing of patient-tailored tablets

A. Samaro et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Materials design for bone-tissue engineering

Gerry L. Koons et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Engineering, Biomedical

Electrospinning of bioactive polycaprolactone-gelatin nanofibres with increased pore size for cartilage tissue engineering applications

Angela Semitela et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2020)

Add to Collection

Review Cell & Tissue Engineering

Metal-based nanoparticles for bone tissue engineering

Reza Eivazzadeh-Keihan et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2020)

Add to Collection

Article Materials Science, Biomaterials

In-situ polymerized polypyrrole nanoparticles immobilized poly(ε-caprolactone) electrospun conductive scaffolds for bone tissue engineering

Bikendra Maharjan et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Conducting Polyetheretherketone Nanocomposites with an Electrophoretically Deposited Bioactive Coating for Bone Tissue Regeneration and Multimodal Therapeutic Applications

Miaomiao He et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Polymer Science

The Potential of Polyethylene Terephthalate Glycol as Biomaterial for Bone Tissue Engineering

Mohamed H. Hassan et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Manufacturing

Engineered dual-scale poly (ε-caprolactone) scaffolds using 3D printing and rotational electrospinning for bone tissue regeneration

Boyang Huang et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication and properties of developed collagen/strontium-doped Bioglass scaffolds for bone tissue engineering

Seyed Ali Mosaddad et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Engineering, Biomedical

3D-printed Biomimetic Bioactive Glass Scaffolds for Bone Regeneration in Rat Calvarial Defects

Krishna C. R. Kolan et al.

INTERNATIONAL JOURNAL OF BIOPRINTING (2020)

Add to Collection

Article Engineering, Biomedical

Investigation of bone reconstruction using an attenuated immunogenicity xenogenic composite scaffold fabricated by 3D printing

Qiongxi Pan et al.

BIO-DESIGN AND MANUFACTURING (2020)

Add to Collection

Article Materials Science, Biomaterials

Fabrication and characterisation of 3D printed MWCNT composite porous scaffolds for bone regeneration

Boyang Huang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D-printed PCL/bioglass (BGS-7) composite scaffolds with high toughness and cell-responses for bone tissue regeneration

YongBok Kim et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection

Article Materials Science, Biomaterials

Engineered 3D printed poly(ε-caprolactone)/graphene scaffolds for bone tissue engineering

Weiguang Wang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Synthesis and Optimization of PCL-Bioactive Glass Composite Scaffold for Bone Tissue Engineering

Raghav Soni et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Four-dimensional imaging and quantification of viscous flow sintering within a 3D printed bioactive glass scaffold using synchrotron X-ray tomography

A. Nommeots-Nomm et al.

MATERIALS TODAY ADVANCES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Biomaterials for bone tissue engineering scaffolds: a review

Huawei Qu et al.

RSC ADVANCES (2019)

Add to Collection

Review Engineering, Biomedical

Bone Mechanical Properties in Healthy and Diseased States

Elise F. Morgan et al.

ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 20 (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Bioactive glass-ceramic scaffolds by additive manufacturing and sinter-crystallization of fine glass powders

Hamada Elsayed et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Materials Science, Biomaterials

Mechanical, material, and biological study of a PCL/bioactive glass bone scaffold: Importance of viscoelasticity

Alireza Shahin-Shamsabadi et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)

Add to Collection

Review Biotechnology & Applied Microbiology

Bioactive Glasses: Sprouting Angiogenesis in Tissue Engineering

Saeid Kargozar et al.

TRENDS IN BIOTECHNOLOGY (2018)

Add to Collection

Article Engineering, Biomedical

In vitro and in vivo bone formation potential of surface calcium phosphate-coated polycaprolactone and polycaprolactone/bioactive glass composite scaffolds

Patrina S. P. Poh et al.

ACTA BIOMATERIALIA (2016)

Add to Collection

Article Chemistry, Physical

Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering

Weiguang Wang et al.

MATERIALS (2016)

Add to Collection

Article Engineering, Biomedical

A comparative study of the effects of different bioactive fillers in PLGA matrix composites and their suitability as bone substitute materials: A thermo-mechanical and in vitro investigation

R. L. Simpson et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)

Add to Collection

Article Cell & Tissue Engineering

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering

Joydip Kundu et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Collagen surface modified poly(ε-caprolactone) scaffolds with improved hydrophilicity and cell adhesion properties

Ines Sousa et al.

MATERIALS LETTERS (2014)

Add to Collection

Correction Engineering, Biomedical

Fabrication and in vitro characterization of bioactive glass composite scaffolds for bone regeneration (vol 5, 045005,2013)

Patrina S. P. Poh et al.

BIOFABRICATION (2014)

Add to Collection

Article Polymer Science

Effect of bioactive glass particles on the thermal degradation behaviour of medical polyesters

A. Larranaga et al.

POLYMER DEGRADATION AND STABILITY (2013)

Add to Collection

Article Polymer Science

Improvement of thermal stability and mechanical properties of medical polyester composites by plasma surface modification of the bioactive glass particles

A. Larranaga et al.

POLYMER DEGRADATION AND STABILITY (2013)

Add to Collection

Article Engineering, Industrial

Biomedical production of implants by additive electro-chemical and physical processes

Paulo Bartolo et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Review Polymer Science

Additive manufacturing of tissues and organs

Ferry P. W. Melchels et al.

PROGRESS IN POLYMER SCIENCE (2012)

Add to Collection

Review Materials Science, Biomaterials

Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives

Qiang Fu et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)

Add to Collection

Article Engineering, Biomedical

A porous PCL scaffold promotes the human chondrocytes redifferentiation and hyaline-specific extracellular matrix protein synthesis

N. Garcia-Giralt et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)

Add to Collection

Article Engineering, Biomedical

The surface functionalization of 45S5 Bioglass®-based glass-ceramic scaffolds and its impact on bioactivity

Q. Z. Chen et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)

Add to Collection

Review Engineering, Biomedical

Porosity of 3D biomaterial scaffolds and osteogenesis

V Karageorgiou et al.

BIOMATERIALS (2005)

Add to Collection

Article Biochemistry & Molecular Biology

Ionic products of bioactive glass dissolution increase proliferation of human osteoblasts and induce insulin-like growth factor II mRNA expression and protein synthesis

ID Xynos et al.

BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.