4.4 Article

Temperature sensitivity analysis on mass-spring potential with electrostatic frequency reduction for lunar seismometers

Journal

AIP ADVANCES
Volume 11, Issue 12, Pages -

Publisher

AIP Publishing
DOI: 10.1063/5.0064623

Keywords

-

Funding

  1. NASA MatISSE program
  2. NASA [80NSSC19M0216, 80NSSC18K1628]
  3. NASA

Ask authors/readers for more resources

To achieve the objectives of the International Lunar Network, the next generation of lunar seismometers need to achieve a high level of sensitivity at 1mHz. The use of Electrostatic Frequency Reduction (EFR) technique can enhance sensitivity, but it may also amplify temperature sensitivity.
A broadband seismometer has been identified as an important scientific instrument that can be deployed on the surface of Earth's Moon in the near future. To achieve the goals of the International Lunar Network, this next generation of seismometers is required to achieve at least 2 x 10(-10) ms(-2) Hz(-1/2) at 1 mHz, which are several orders of magnitude more sensitive at the same frequency than the ones deployed during the Apollo program; their goal is to capture the lunar seismic noise floor, observe the lunar normal modes, and record distant teleseisms from all over the Moon. The Electrostatic Frequency Reduction (EFR) technique has been employed in a seismometer design in our laboratory and can enhance the Moonquake measurement sensitivity covering a longer period down to 1 mHz. EFR has advantages over the traditional frequency reduction techniques since it can be autonomously tuned and lowers the resonance frequency without modifying the mechanical design of a capacitive readout seismometer, an approach desirable for spaceflight-qualified instrumentation. A drawback is that we have also found that the EFR as well as other frequency reduction techniques amplify the temperature sensitivity of a seismometer beyond the limit of a conventional temperature control system. Here, we describe quantitatively and analytically the temperature dependence of a spring suspended mass model of a seismometer and provide practical solutions to minimize the thermal effects on a lunar seismometer using the EFR technique. By choosing the materials for the seismometer housing and the spring suspension that could balance the shear modulus and thermal expansion coefficients, one could mitigate the thermal sensitivity of the seismometer using the EFR technique. These modifications allow us to approach the stringent requirements for instrument self-noise necessary for the science objective. (c) 2021 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license(http://creativecommons.org/licenses/by/4.0/).

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.4
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available