☆ 4.7 Article

Effect of dual-rotation on MHD natural convection of NEPCM in a hexagonal-shaped cavity based on time-fractional ISPH method

SCIENTIFIC REPORTS (2021)

Related references

Note: Only part of the references are listed.

Review Thermodynamics

A review on the applications of micro-/nano-encapsulated phase change material slurry in heat transfer and thermal storage systems

Mohammad Saeid Ghoghaei et al.

Summary: In modern heat transfer systems, thermal storage not only helps to balance demand and supply, but also improves heat transfer efficiency. This study reviewed the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs) and their effects on thermal storage and heat transfer enhancement. The addition of MPCMs/NPCMs to the base fluid has advantages such as intensifying energy absorption capacity and increasing heat transfer coefficient and Nusselt number.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Double-diffusive convection between two different phases in a porous infinite-shaped enclosure suspended by nano encapsulated phase change materials

Abdelraheem M. Aly et al.

Summary: This paper focuses on numerical simulation using a mesh-free method for a double-diffusive flow in a porous infinite-shaped enclosure suspended by NEPCM. The effects of various parameters on the phase change zone, materials tracking, temperature, velocity field, and concentration were discussed, showing the importance of fusion temperature and Stefan number in controlling the phase change zone.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

The magnetic field on a nanofluid flow within a finned cavity containing solid particles

Abdelraheem M. Aly et al.

Summary: The ISPH method is used to analyze the effects of a magnetic field on thermosolutal convection of solid particles spreading within a finned cavity. The simulations show that solid particles tend to move towards the upper part of the cavity and the fins on the upper wall play a role in adjusting the spread of the particles. The blending between solid and fluid particles is influenced by an increase in the Hartman parameter, while the Soret and Dufour numbers reduce the blending of solid particles within a nanofluid flow.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Natural convection melting in a cubic cavity with internal fins: A lattice Boltzmann study

Dinggen Li et al.

Summary: The study found that the presence of internal fins enhances heat transfer performance while maintaining a similar total amount of stored energy compared to the case without fins. Furthermore, changing the fins structures can offer a higher rate of heat transfer and a better energy storage capacity, rather than increasing the number of fins.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Analysis of hybrid nanofluid and surface corrugation in the laminar convective flow through an encapsulated PCM filled vertical cylinder and POD-based modeling

Fatih Selimefendigil et al.

Summary: In this study, numerical simulations were used to investigate the performance assessment of a PCM filled three-dimensional vertical cylinder under the combined effects of surface corrugation and presence of binary nanoparticles in the heat transfer fluid. Results showed that thermal transport features are enhanced and charging time is reduced for higher values of Reynolds number and solid volume fraction of the binary mixture in the heat transfer fluid.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Convective heat transfer of nano-encapsulated phase change material suspension in a divergent minichannel heatsink

C. J. Ho et al.

Summary: The phase change heat transfer of NEPCM particles can significantly enhance heat transfer efficiency at low Reynolds numbers and low heating powers, but its advantage over pure water diminishes at large Reynolds numbers.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage

W. Q. Li et al.

Summary: The Foam/NEPCM composite material enhances thermal energy storage by combining the thermal enhancement of metal foam and latent heat absorption of NEPCM, resulting in lower wall temperature and more uniform internal temperature compared to pure NEPCM. The study also found that the lower porosity Foam/NEPCM composite has lower heated wall temperature and internal temperature near the heated wall due to its higher thermal conductivity and area/volume ratio.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Chemical

Interaction of fusion temperature on the magnetic free convection of nano-encapsulated phase change materials within two rectangular fins- equipped porous enclosure

A. Sattar Dogonchi et al.

Summary: This study investigated the free convection of conducting nanofluid within a porous enclosure filled with NEPCMs and the impact of non-dimensional fusion temperature on heat transfer. The results showed an increase in both longitudinal and transverse velocity profiles with an increased Rayleigh number, while a weaker flow field was generated with an increasing Hartmann number.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Construction & Building Technology

Optimization of the thermal performance of nano-encapsulated phase change material slurry in double pipe heat exchanger: Design of experiments using response surface methodology (RSM)

Arman Chananipoor et al.

Summary: The study experimentally investigated the convective heat transfer of NPCM slurry in a double-pipe heat exchanger, demonstrating that the use of improved nanocapsules can enhance the heat transfer performance of the NPCM slurry, resulting in maximum thermal efficiency after optimization.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Thermal behavior and energy storage of a suspension of nano-encapsulated phase change materials in an enclosure

Mehdi Ghalambaz et al.

Summary: The energy storage capability of Nano-Encapsulated Phase Change Material (NEPCM) nanoparticles in an enclosure during the charging and discharging process was investigated. The study found that an increase in the volume fraction of nanoparticles led to a rise in the rate of heat transfer and total energy storage. Additionally, decreasing the Stefan number increased the total stored energy, and the fusion temperature played a significant role in the energy storage behavior.

ADVANCED POWDER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Controlling the natural convection of a non-Newtonian fluid using a flexible fin

Mohammad Shahabadi et al.

Summary: This study investigates the flow and heat transfer of a power-law non-Newtonian fluid in a cavity, revealing significant effects of the fluid properties on flow and heat transfer processes, as well as a two-way coupling between the fluid and structure.

APPLIED MATHEMATICAL MODELLING (2021)

Add to Collection

Article Energy & Fuels

Phase change dynamics in a cylinder containing hybrid nanofluid and phase change material subjected to a rotating inner disk

Fatih Selimefendigil et al.

Summary: This numerical study investigates the phase change dynamics of a 3D cylinder with hybrid nanofluid and phase change material, showing that rotational effects have a profound influence on the phase change process. A neural network prediction method is proposed for fast and reliable predictions of phase change dynamics.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Thermodynamics

Double-diffusive convection of a rotating circular cylinder in a porous cavity suspended by nano-encapsulated phase change materials

Zehba Raizah et al.

Summary: The fusion temperature controls the location and intensity of the phase change zone inside the cavity; the melting-solidification zones are not changing under variations in the buoyancy ratio parameter; an increase in radius of the circular cylinder enhances double diffusive convection and reduces the intensity of the phase change zone.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Computer Science, Information Systems

Interval-valued fractional q-calculus and applications

Awais Younus et al.

Summary: This study investigates the properties of interval-valued functions defined on the q-geometric set of real numbers, including generalized Hukuhara difference, fractional q-differentiability, q-integrability, and fractional q-integrability. It shows the connections between real-valued and interval-valued derivatives and provides some examples and applications.

INFORMATION SCIENCES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Thermal convection of nano-liquid in an electronic cabinet with finned heat sink and heat generating element

M. A. Sheremet et al.

Summary: This research simulated free convection of alumina nanoliquid to study the influences of energy transport and flow structures, finding that increasing the fins height and particles concentration can enhance heat removal from the heated source.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Add to Collection

Article Energy & Fuels

Mixed convection in a PCM filled cavity under the influence of a rotating cylinder

Fatih Selimefendigil et al.

SOLAR ENERGY (2020)

Add to Collection

Article Physics, Multidisciplinary

Maxwell fluid flow between vertical plates with damped shear and thermal flux: Free convection

Wang Na et al.

CHINESE JOURNAL OF PHYSICS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Mixed convection heat transfer by nanofluids in a cavity with two oscillating flexible fins: A fluid-structure interaction approach

Esmail Jamesahar et al.

APPLIED MATHEMATICAL MODELLING (2020)

Add to Collection

Article Thermodynamics

Forced convection heat transfer of Nano-Encapsulated Phase Change Material (NEPCM) suspension in a mini-channel heatsink

C. J. Ho et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Convective heat transfer characteristics of twin -web turbine disk with pin fins in the inner cavity

Lei Li et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection

Article Chemistry, Physical

Phase change process of nanoparticle enhanced PCM in a heat storage including unsteady conduction

Ahmad Shafee et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Engineering, Chemical

Free convective melting-solidification heat transfer of nano-encapsulated phase change particles suspensions inside a coaxial pipe

Mohammad Ghalambaz et al.

ADVANCED POWDER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

A CFD parametric analysis of natural convection in an H-shaped cavity with two-sided inclined porous fins

Fatemeh Keramat et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Add to Collection

Article Energy & Fuels

Magneto-fluid dynamic and second law analysis in a hot porous cavity filled by nanofluid and nano-encapsulated phase change material suspension with different layout of cooling channels

M. Hashemi-Tilehnoee et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Energy & Fuels

Entropy generation and natural convection flow of a suspension containing nano-encapsulated phase change particles in a semi-annular cavity

Mehdi Ghalambaz et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Thermodynamics

Natural convection combined with surface radiation in a rotating cavity with an element of variable volumetric heat generation

Stepan A. Mikhailenko et al.

ENERGY (2020)

Add to Collection

Article Thermodynamics

Free convection heat transfer analysis of a suspension of nano-encapsulated phase change materials (NEPCMs) in an inclined porous cavity

Mohammad Ghalambaz et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection

Article Thermodynamics

Natural convection in a CuO-water nanofluid filled cavity under the effect of an inclined magnetic field and phase change material (PCM) attached to its vertical wall

Fatih Selimefendigil et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Engineering, Mechanical

Thermal convection in Al2O3-water nanoliquid rotating chamber with a local isothermal heater

S. A. Mikhailenko et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Natural convective flow and heat transfer of Nano-Encapsulated Phase Change Materials (NEPCMs) in a cavity

Mohammad Ghalambaz et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Chemistry, Physical

Natural convection of bio-nanofluid between two vertical parallel plates with damped shear and thermal flux

Nehad Ali Shah et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Thermodynamics

A finite particle method with particle shifting technique for modeling particulate flows with thermal convection

Z. L. Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Convective heat transfer in a rotating nanofluid cavity with sinusoidal temperature boundary condition

S. A. Mikhailenko et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

Applications of non-integer Caputo time fractional derivatives to natural convection flow subject to arbitrary velocity and Newtonian heating

M. A. Imran et al.

NEURAL COMPUTING & APPLICATIONS (2018)

Add to Collection

Article Thermodynamics

Non-uniform heat transfer suppression to enhance PCM melting by angled fins

Chenzhen Ji et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Physics, Multidisciplinary

Natural convection with damped thermal flux in a vertical circular cylinder

Najma Ahmed et al.

CHINESE JOURNAL OF PHYSICS (2018)

Add to Collection

Review Mathematics, Applied

A new collection of real world applications of fractional calculus in science and engineering

HongGuang Sun et al.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2018)

Add to Collection

Article Engineering, Mechanical

Convective-radiative heat transfer in a rotating square cavity with a local heat-generating source

S. A. Mikhailenko et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Thermodynamics

Fluid-structure interaction in natural convection heat transfer in an oblique cavity with a flexible oscillating fin and partial heating

A. I. Alsabery et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Double-diffusive natural convection in an enclosure including/excluding sloshing rod using a stabilized ISPH method

Abdelraheem M. Aly

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

GPU accelerated numerical study of PCM melting process in an enclosure with internal fins using lattice Boltzmann method

Qinlong Ren et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Engineering, Mechanical

Thermal Conductivity and Viscosity of Nanofluids Having Nanoencapsulated Phase Change Material

Semahat Barlak et al.

Nanoscale and Microscale Thermophysical Engineering (2016)

Add to Collection

Article Energy & Fuels

Maximization of performance of a PCM latent heat storage system with innovative fins

A. Sciacovelli et al.

APPLIED ENERGY (2015)

Add to Collection

Article Thermodynamics

Analysis of unsteady mixed convection in lid-driven cavity included circular cylinders motion using an incompressible smoothed particle hydrodynamics method

Abdelraheem M. Aly et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2015)

Add to Collection

Article Thermodynamics

Modeling of multi-phase flows and natural convection in a square cavity using an incompressible smoothed particle hydrodynamics

Abdelraheem Mahmoud Aly

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2015)

Add to Collection

Article Thermodynamics

Modelling of Non-Darcy Flows through Porous Media Using Extended Incompressible Smoothed Particle Hydrodynamics

Abdelraheem M. Aly et al.

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS (2015)

Add to Collection

Article Thermodynamics

An incompressible smoothed particle hydrodynamics method for natural/mixed convection in a non-Darcy anisotropic porous medium

Abdelraheem M. Aly et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Mathematics, Applied

A new definition of fractional derivative

R. Khalil et al.

JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2014)

Add to Collection

Review Green & Sustainable Science & Technology

Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules

Ziye Ling et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Add to Collection

Article Thermodynamics

Simulation of flow inside differentially heated rotating cavity

J. C. Mandal et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2013)

Add to Collection

Article Energy & Fuels

Review on thermal energy storage with phase change materials (PCMs) in building applications

D. Zhou et al.

APPLIED ENERGY (2012)

Add to Collection

Article Thermodynamics

Numerical study of natural convection in partially heated rectangular enclosures filled with nanofluids

Hakan F. Oztop et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2008)

Add to Collection

Article Thermodynamics

A numerical study of natural convection in a square enclosure with a circular cylinder at different vertical locations

B. S. Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)

Add to Collection

Article Thermodynamics

On the role of coriolis force in a two-dimensional thermally driven flow in a rotating enclosure

Nadeem Hasan et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Article Thermodynamics

Numerical simulation of liquid metals in differentially heated enclosure undergoing orthogonal rotation

M. F. Baig et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Add to Collection

Article Thermodynamics

The dynamics of two-dimensional buoyancy driven convection in a horizontal rotating cylinder

N Hasan et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.