☆ 4.7 Article

MHD darcy-forchheimer nanofluid flow and entropy optimization in an odd-shaped enclosure filled with a (MWCNT-Fe3O4/water) using galerkin finite element analysis

SCIENTIFIC REPORTS (2021)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Experimental study on forced convection heat transfer of a nanofluid in a heat exchanger filled partially porous material

Mehdi Salari et al.

Summary: The heat transfer characteristics of MgO-EG nanofluid flowing in a double tube heat exchanger with a partial porous material were experimentally investigated. The results showed that using nanofluid and porous media significantly improved heat transfer. The use of partial porous media is recommended to enhance the thermal performance of heat exchangers in industrial applications.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Thermodynamics

Numerical analysis of flow and heat transfer in a shell and tube heat exchanger in the gas recirculation cooling system of a diesel engine and the effect of nanofluid on its performance

Mohammad Rasoul Ahmadi et al.

Summary: The study simulated the flow and heat transfer of nanofluids in a shell and tube heat exchanger, investigating the impact of factors like fluid velocities, volume fraction of nanofluids, and the use of twisted tape and baffles on thermal performance. Results showed that twisted tape had a greater effect on improving thermal performance compared to baffles, and the use of seawater led to decreased thermal efficiency and increased pressure drop.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Mechanics

Temperature-dependent viscosity and thermal conductivity effects on peristaltic flow of Carreau-Yasuda nanofluid in a 2D tapered asymmetric channel: applications of solar collectors

W. M. Hasona

Summary: This paper investigates the effects of variable viscosity and thermal conductivity on peristaltic flow of Carreau-Yasuda nanofluid in a 2D tapered asymmetric channel. The results show that increasing the viscosity parameter can decrease temperature, while increasing Brownian motion and thermophoresis parameters can enhance heat transfer and solar absorption.

MECHANICS OF TIME-DEPENDENT MATERIALS (2021)

Add to Collection

Article Thermodynamics

Thermal and flow investigation of MHD natural convection in a nanofluid-saturated porous enclosure: an asymptotic analysis

Lefteris Th. Benos et al.

Summary: The present study obtained asymptotic solutions regarding the laminar natural convection of a nanofluid in a porous enclosure subject to internal heating and magnetic field, which is widely applied in industrial and bioengineering applications. The innovation of this study lies in providing a first-principles approach for describing the thermal conductivity and viscosity of nanofluids with three kinds of nanoparticles dispersed in aqueous suspension, and examining the effects of various factors on nanofluid flow and heat transfer. The study suggests that an increase in magnetic field intensity tends to suppress nanofluid flow, while increasing internal heating reinforces convective currents in favor of cooling process.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Significance of nonlinear thermal radiation in 3D Eyring-Powell nanofluid flow with Arrhenius activation energy

Taseer Muhammad et al.

Summary: This paper investigates a mathematical analysis of three-dimensional Eyring-Powell nanofluid nonlinear thermal radiation with modified heat plus mass fluxes. The slip condition is introduced to enhance the dynamical and physical study of structure, and a Riga plate is employed to diminish the friction and pressure drag of submarines. The Cattaneo-Christov heat flux model is used to evaluate heat transfer, and comparisons between bvp4c results and shooting technique are made with graphical and numerical illustrations for prominent parameters.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Treatment of nanofluid within porous media using non-equilibrium approach

Ahmad Shafee et al.

Summary: This paper examines the impact of Lorentz force on heat transfer and analyzes the behavior of nanomaterial within a domain studied through non-equilibrium theory. The addition of the radiation term and investigation of the shape factor impact were also conducted. Results show that the suppression of convective flow in the presence of Lorentz forces leads to a decrease in the average Nusselt number Nu(ave); as Rayleigh number increases, more complex isotherms are generated and Nu(ave) increases.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Bioconvection flow of magnetized Carreau nanofluid under the influence of slip over a wedge with motile microorganisms

Taseer Muhammad et al.

Summary: This article investigates the time-dependent flow of magnetized rheological Carreau nanoliquid conveying microorganisms over a moving wedge with velocity slip and thermal radiation features. By utilizing the Carreau fluid model and various physical parameters, numerical results for physical quantities have been obtained and presented graphically.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Thermal design of a spherical electronic device naturally cooled by means of water-copper nanofluid saturated porous media

Abderrahmane Bairi et al.

Summary: This study focuses on optimizing thermal regulation of a spherical electronic device used in naval navigation techniques by adjusting the thermal conductivity ratio, volume fraction, and Rayleigh number. The results show that the thermal conductivity ratio has a significant influence on the device's average surface temperature, while the volume fraction has a moderate impact within the considered range of Rayleigh number. The findings help enhance the reliability and thermal sizing design of the assembly.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Effects of various configurations of an inserted corrugated conductive cylinder on MHD natural convection in a hybrid nanofluid-filled square domain

Tahar Tayebi et al.

Summary: The study aimed to understand heat transfer and flow characteristics by natural convection of Al2O3-Cu/water-based hybrid nanofluid-filled square domain with various corrugated solid configurations under a horizontal magnetic field. Numerical solutions were obtained for the non-dimensional equations using finite volume discretization technique. It was found that maximum heat transmission rate occurred for weak Hartmann, undulation number, undulation amplitude, and high Rayleigh and nanoparticles volumic fraction values. Moreover, the fluid/solid heat conductivity ratio parameter enhanced heat transfer at weak Rayleigh while diminishing it at high Rayleigh.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Numerical investigation of MHD impact on Maxwell nanofluid

Wasim Jamshed

Summary: This study investigates the entropy generation in a magnetohydrodynamic flow of a Maxwell nanofluid over an infinite horizontal surface. The research findings show that nanofluids have a significant advantage in thermal conductivity compared to conventional fluids.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Multidisciplinary Sciences

Plasma Hsp90 levels in patients with systemic sclerosis and relation to lung and skin involvement: a cross-sectional and longitudinal study

Hana Storkanova et al.

Summary: According to the study, plasma levels of Hsp90 are increased in patients with systemic sclerosis compared to healthy controls, and are associated with increased inflammatory activity, worsened lung function, and extent of skin involvement in patients with diffuse cutaneous systemic sclerosis. In patients with systemic sclerosis-associated interstitial lung disease treated with cyclophosphamide, baseline Hsp90 levels can predict changes in DLCO over 12 months of therapy.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Physics, Multidisciplinary

Keller box study for inclined magnetically driven Casson nanofluid over a stretching sheet: single phase model

Wasim Jamshed et al.

Summary: This study investigates the Casson nanofluid flow with inclined magnetohydrodynamics, viscous dissipation, joule heating, thermal radiation, and particle shape factor effects over a moving flat horizontal surface with entropy analysis. The Tiwari and Das model is utilized with ethylene glycol as a base fluid to study the impact of nanoparticles volume fraction on heat transfer enhancement compared to the Buongiorno model. The surface drag coefficient and Nusselt number behavior for different sundry parameters are examined, revealing that higher Reynolds and Brinkman numbers increase the overall entropy of the system.

PHYSICA SCRIPTA (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrothermal and Entropy Investigation of Ag/MgO/H2O Hybrid Nanofluid Natural Convection in a Novel Shape of Porous Cavity

Nidal Abu-Libdeh et al.

Summary: This study examines the behavior of a new cavity form filled with Ag/MgO/H2O nanofluids and porous media under a constant magnetic field, finding that an increase in the Hartmann number limits the heat transfer rate, making the magnetic field an excellent heat transfer controller.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Engineering, Mechanical

MHD natural convection and entropy generation of non-Newtonian ferrofluid in a wavy enclosure

Sadia Afsana et al.

Summary: The study investigates 2D laminar MHD natural convection flow of non-Newtonian ferrofluid in a wavy enclosure, focusing on heat transfer, streamlines, isotherms, and entropy generation. Numerical simulations reveal differences in behavior and properties of different fluid types under magnetic field influence, with significant effects on heat transfer and entropy generation.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Thermal examination of renewable solar energy in parabolic trough solar collector utilizing Maxwell nanofluid: A noble case study

Wasim Jamshed et al.

Summary: This research focuses on inclined magnetically driven Maxwell nanofluid flow on an endless plate in a parabolic trough solar collector (PTSC), considering essential exterior resources in PTSC. Copper-methanol (Cu-Ch(3)OH) nanofluid is found to have better heat transfer and can achieve a maximum thermal efficiency of 29% compared to Titanium-methanol (TiO2-Ch(3)OH) nanofluid.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Numerical simulation for melting heat transport in nanofluids due to quadratic stretching plate with nonlinear thermal radiation

Taseer Muhammad et al.

Summary: This investigation examines the effect of MHD on the steady 2D transport of C6H9NaO7(SA) MWCNT &C6H9NaO7(SA) SWCNT nanofluids, considering the enhancement of thermal efficiency and mechanical characteristics by carbon nanotubes. Mathematical expressions are transformed into dimensionless ODEs while numerical results are analyzed using MATLAB's bvp4c technique. The rheological behavior of pertinent parameters against flow and thermal fields is also examined.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Features of entropy optimization on viscous second grade nanofluid streamed with thermal radiation: A Tiwari and Das model

Wasim Jamshed et al.

Summary: This study investigated the heat transfer characteristics of Second grade fluid model in nanofluid flow using a single-phase model. The addition of nanoparticle volume fraction can affect the fluid temperature and entropy values. The heavier density of copper nanoparticles impedes the flow profile while also increasing the fluid temperature.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Physics, Multidisciplinary

Natural convection of nanoliquid from elliptic cylinder in wavy enclosure under the effect of uniform magnetic field: numerical investigation

Abed Mourad et al.

Summary: This article conducts a three-dimensional numerical simulation to analyze the flow and heat transfer process between a cold wavy porous enclosure and a hot elliptic cylinder, finding that the use of alumina nanoparticles significantly enhances heat exchange. Furthermore, the Darcy number and Hartmann number in the porous layer also have a significant impact on the heat transfer rate.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

Add to Collection

Article Thermodynamics

Effect of internal heat generation or absorption on conjugate thermal-free convection of a suspension of hybrid nanofluid in a partitioned circular annulus

Tahar Tayebi et al.

Summary: This study explains the impact of a solid conductive partition on thermal natural convective flow within a concentric circular annulus filled with a water-based hybrid nanoliquid. Factors like nanoparticle concentration, Rayleigh number, and heat conductivity ratio were found to influence thermo-hydrodynamic behavior. Results show that the presence of a conductive solid partition significantly modifies heat exchange behaviors within the annulus.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Multidisciplinary Sciences

Galerkin finite element analysis of magneto two-phase nanofluid flowing in double wavy enclosure comprehending an adiabatic rotating cylinder

Wael Al-Kouz et al.

Summary: In this study, the finite element method was used to simulate heat transfer and irreversibilities in a mixed convection two-phase flow through a wavy enclosure filled with water-alumina nanoliquid containing a rotating solid cylinder in the presence of a uniform magnetic field. The results showed that increasing the Rayleigh number enhanced the maximum value of the flow function and the heat transfer process, while increasing the waviness of the active surfaces or the rotational velocity of the cylinder or the Hartmann number suppressed fluid motion and hindered heat transfer.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Numerical modeling of entropy production in Al2O3/H2O nanofluid flowing through a novel Bessel-like converging pipe

Olatomide Gbenga Fadodun et al.

Summary: This study investigates the entropy production rate of -Al2O3 nanofluid flowing through novel Bessel-like convergent pipes, showing that increasing the convergent index enhances viscous entropy production rate but diminishes thermal entropy production rate. A new correlation is developed using response surface methodology to estimate the entropy production rate as a function of the Reynolds number, nanoparticle concentration, and convergence index, revealing the advantages of using converging pipes over straight pipes.

INTERNATIONAL NANO LETTERS (2021)

Add to Collection

Article Thermodynamics

Significance of quadratic thermal radiation and quadratic convection on boundary layer two-phase flow of a dusty nanoliquid past a vertical plate

B. Mahanthesh et al.

Summary: Numerical study of boundary layer two-phase flow of particulate Al2O3-H2O nanoliquid over a vertical flat plate was conducted considering quadratic thermal convection and thermal radiation. Different models were used to describe the flow of dusty nanoliquids, with nonlinear thermal radiation showing the best heat transfer enhancement, followed by quadratic thermal radiation and linear thermal radiation. Furthermore, the presence of Al2O3 nanoparticles improved heat transport, while an increase in dust particles mass fraction reduced it.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Magnetic field effects on forced convection flow of a hybrid nanofluid in a cylinder filled with porous media: a numerical study

Ehsan Aminian et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Thermodynamics

Numerical investigation of nanofluid laminar forced convection heat transfer between two horizontal concentric cylinders in the presence of porous medium

Xinglong Liu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Energy & Fuels

Second law analysis of hybrid nanofluid flow in a microchannel heat sink integrated with ribs and secondary channels for utilization in miniature thermal devices

Mehdi Bahiraei et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)

Add to Collection

Article Thermodynamics

Two-phase mixture simulation of the effect of fin arrangement on first and second law performance of a bifurcation microchannels heatsink operated with biologically prepared water-Ag nanofluid

Yulin Ma et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Nanoscience & Nanotechnology

The effect of porous medium configuration on nanofluid heat transfer

Sadegh Alihosseini et al.

APPLIED NANOSCIENCE (2020)

Add to Collection

Article Thermodynamics

Mixed convection enhancement by using optimized porous media and nanofluid in a cavity with two rotating cylinders

Milad Tahmasbi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Thermodynamics

Magnetohydrodynamic natural convection of hybrid nanofluid in a porous enclosure: numerical analysis of the entropy generation

Zaim Abdel-Nour et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Engineering, Chemical

Effects of the porous medium and water-silver biological nanofluid on the performance of a newly designed heat sink by using first and second laws of thermodynamics

Amin Shahsavar et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Chemical

CFD analysis of second law characteristics for flow of a hybrid biological nanofluid under rotary motion of a twisted tape: Exergy destruction and entropy generation analyses

Mehdi Bahiraei et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Thermo-hydraulic characteristics of radiator with various shape nanoparticle-based ternary hybrid nanofluid

Rashmi Rekha Sahoo

POWDER TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Optical, stability and energy performance of water-based MXene nanofluids in hybrid PV/thermal solar systems

A. S. Abdelrazik et al.

SOLAR ENERGY (2020)

Add to Collection

Article Thermodynamics

Swimming of Gyrotactic Microorganisms in Unsteady Flow of Eyring Powell Nanofluid with Variable Thermal Features: Some Bio-technology Applications

Sami Ullah Khan et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2020)

Add to Collection

Article Physics, Multidisciplinary

A novel study on time-dependent viscosity model of magneto-hybrid nanofluid flow over a permeable cone: applications in material engineering

Hanifa Hanif et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2020)

Add to Collection

Article Chemistry, Physical

Insights into the stability and thermal properties of WSe2-based nanofluids for concentrating solar power prepared by liquid phase exfoliation

Paloma Martinez-Merino et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Engineering, Aerospace

Galerkin finite element analysis of magneto-hydrodynamic natural convection of Cu-water nanoliquid in a baffled U-shaped enclosure

A. Zaim et al.

PROPULSION AND POWER RESEARCH (2020)

Add to Collection

Article Thermodynamics

Heat transfer enhancement of a radiator with mass-producing nanofluids (EG/water-based Al2O3 nanofluids) for cooling a 100 kW high power system

Tae Jong Choi et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

Numerical simulation of MHD flow and heat transfer inside T-shaped cavity by the parallel walls motion

A. A. El Desouky et al.

SN APPLIED SCIENCES (2020)

Add to Collection

Article Physics, Multidisciplinary

Entropy Generation Optimization for Rarified Nanofluid Flows in a Square Cavity with Two Fins at the Hot Wall

Wael Al-Kouz et al.

ENTROPY (2019)

Add to Collection

Article Mathematics, Applied

Atangana-Baleanu fractional model for the flow of Jeffrey nanofluid with diffusion-thermo effects: applications in engine oil

Farhad Ali et al.

ADVANCES IN DIFFERENCE EQUATIONS (2019)

Add to Collection

Article Materials Science, Biomaterials

Convective Heat Transfer in Drilling Nanofluid with Clay Nanoparticles: Applications in Water Cleaning Process

Ilyas Khan et al.

BIONANOSCIENCE (2019)

Add to Collection

Article Thermodynamics

A basic study on Thermosyphon-type thermal storage unit (TSU) using Nanofluid as the heat transfer medium

Shuang-Fei Li et al.

HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Energy & Fuels

Numerical simulation of natural convection heat transfer inside a ⊥ shaped cavity filled by a MWCNT-Fe3O4/water hybrid nanofluids using LBM

Mohsen Izadi et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)

Add to Collection

Article Thermodynamics

Numerical study of heat transfer enhancement in the entrance region for low-pressure gaseous laminar pipe flows using Al2O3-air nanofluid

Wael Al-Kouz et al.

ADVANCES IN MECHANICAL ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Simulation of natural convection and entropy generation of MHD non-Newtonian nanofluid in a cavity using Buongiorno's mathematical model

G. H. R. Kefayati et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Review Thermodynamics

A review on why researchers apply external magnetic field on nanofluids

Beriache M'hamed et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Enhancement of the performance heat transfer of a thermosyphon with fin and without fin heat exchangers using Cu-nanofluid as working fluids

P. Meena et al.

JOURNAL OF ENGINEERING THERMOPHYSICS (2014)

Add to Collection

Article Thermodynamics

Natural convective heat transfer in square enclosures heated from below

B Calcagni et al.

APPLIED THERMAL ENGINEERING (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.