Journal
MATERIALS
Volume 14, Issue 23, Pages -Publisher
MDPI
DOI: 10.3390/ma14237133
Keywords
biocoagulation; seafood processing wastes; fish by-products; industrial effluents; response surface methodology; Box-Behnken experimental design
Ask authors/readers for more resources
A novel liquid chitosan-based biocoagulant was successfully prepared from shrimp shells for treating wastewater from a Moroccan fish processing plant. Without adding acetic acid, chitosan can effectively minimize its negative impact on the environment. Through experiments and modeling, it was found that chitosan was efficient in removing turbidity and BOD5 under specific experimental conditions.
A novel liquid chitosan-based biocoagulant for treating wastewater from a Moroccan fish processing plant was successfully prepared from shrimp shells (Parapenaeus longirostris), the most abundant fish by-products in the country. The shells were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transforms infrared spectroscopy. Using chitosan without adding acetic acid helps to minimize its negative impact on the environment. At the same time, the recovery of marine shellfish represents a promising solution for the management of solid fish waste. In order to test the treatment efficiency of the biocoagulant developed, a qualitative characterization of these effluents was carried out beforehand. The optimization process was conducted in two steps: jar-test experiments and modeling of the experimental results. The first step covered the preliminary assessment to identify the most influential operational parameters (experimental conditions), whereas the second step concerned the study of the effects of three significant operational parameters and their interactions using a Box-Behnken experimental design. The variables involved were the concentration of coagulant (X-1), the initial pH (X-2), and the temperature (X-3) of the wastewater samples, while the responses were the removal rates of turbidity (Y-1) and BOD5 (Y-2). The regression models and response surface contour plots revealed that chitosan as a liquid biocoagulant was effective in removing turbidity (98%) and BOD5 (53%) during the treatment. The optimal experimental conditions were found to be an alkaline media (pH = 10.5) and a biocoagulant dose of 5.5 mL in 0.5 L of fish processing wastewater maintained at 20 degrees C.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available