Related references
Note: Only part of the references are listed.Effect of strain rate and corrosion products on pre-exposure stress corrosion cracking in the ZK60 magnesium alloy
Evgeniy Merson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
The influence of alternating cyclic dynamic loads with different low frequencies on the bio-corrosion behaviors of AZ31B magnesium alloy in vitro
Linyuan Han et al.
BIOACTIVE MATERIALS (2022)
Regulation of corrosion damage of magnesium alloys through the use of vacuum zirconium coatings
M. L. Linderov et al.
LETTERS ON MATERIALS (2021)
Vacuum retarding and air accelerating effect on the high-cycle and very-high-cycle fatigue behavior of a ZK60 magnesium alloy
Yongjie Liu et al.
MATERIALS & DESIGN (2021)
Inhibiting stress corrosion cracking by removing corrosion products from the Mg-Zn-Zr alloy pre-exposed to corrosion solutions
Evgeniy Merson et al.
ACTA MATERIALIA (2021)
On the role of pre-exposure time and corrosion products in stress-corrosion cracking of ZK60 and AZ31 magnesium alloys
Evgeniy Merson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Advances in coatings on magnesium alloys for cardiovascular stents - A review
Zhao-Qi Zhang et al.
BIOACTIVE MATERIALS (2021)
Fractographic features of technically pure magnesium, AZ31 and ZK60 alloys subjected to stress corrosion cracking
Evgeniy Merson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The Functional Properties of Mg-Zn-X Biodegradable Magnesium Alloys
Dmitry Merson et al.
MATERIALS (2020)
Advances in coatings on biodegradable magnesium alloys
Zheng-Zheng Yin et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
Corrosion fatigue of the extruded Mg-Zn-Y-Nd alloy in simulated body fluid
Mengyao Liu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
Biodegradable Magnesium Alloy (ZK60) with a Poly(l-lactic)-Acid Polymer Coating for Maxillofacial Surgery
Soo-Hwan Byun et al.
METALS (2020)
Microstructural, mechanical and corrosion characterization of an as-cast Mg-3Zn-0.4Ca alloy for biomedical applications
N. Pulido-Gonzalez et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
Microstructure and Corrosion of Cast Magnesium Alloy ZK60 in NaCl Solution
Zhen Li et al.
MATERIALS (2020)
Improving stress corrosion cracking behavior of AZ31 alloy with conformal thin titania and zirconia coatings for biomedical applications
M. Peron et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Effect of deformation processing of the dilute Mg-1Zn-0.2Ca alloy on the mechanical properties and corrosion rate in a simulated body fluid
D. L. Merson et al.
LETTERS ON MATERIALS (2020)
Magnesium extrusion alloys: a review of developments and prospects
Zhuoran Zeng et al.
INTERNATIONAL MATERIALS REVIEWS (2019)
High Performance Fine-Grained Biodegradable Mg-Zn-Ca Alloys Processed by Severe Plastic Deformation
Alexei Vinogradov et al.
METALS (2019)
Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures
Ruixiao Zheng et al.
SCIENTIFIC REPORTS (2019)
Biodegradable magnesium alloys as temporary orthopaedic implants: a review
Sepideh Kamrani et al.
BIOMETALS (2019)
Magnesium Implants: Prospects and Challenges
Parama Chakraborty Banerjee et al.
MATERIALS (2019)
Corrosion Fatigue of Fine Grain Mg-Zn-Zr and Mg-Y-Zn Alloys
Mikhail Linderov et al.
METALS (2018)
A combined coating strategy based on atomic layer deposition for enhancement of corrosion resistance of AZ31 magnesium alloy
Xiangmei Liu et al.
APPLIED SURFACE SCIENCE (2018)
Microstructure Evolution in Mg-Zn-Zr-Gd Biodegradable Alloy: The Decisive Bridge Between Extrusion Temperature and Performance
Huai Yao et al.
FRONTIERS IN CHEMISTRY (2018)
Quantitative Assessment of the Bauschinger Effect in Magnesium Alloys with the Asymmetry Effect
D. L. Merson et al.
INORGANIC MATERIALS (2018)
Assessing Fracture Surface Ductility by Confocal Laser Scanning Microscopy
E. D. Merson et al.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)
Review of magnesium-based biomaterials and their applications
Nurettin Sezer et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2018)
A Phenomenological Model of Twinning Kinetics
Alexei Vinogradov et al.
ADVANCED ENGINEERING MATERIALS (2017)
Corrosion fatigue of a magnesium alloy under appropriate human physiological conditions for bio-implant applications
Shervin Eslami Harandi et al.
ENGINEERING FRACTURE MECHANICS (2017)
Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment
Sajjad Jafari et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Influence of bovine serum albumin in Hanks' solution on the corrosion and stress corrosion cracking of a magnesium alloy
Shervin Eslami Harandi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Fundamentals and advances in magnesium alloy corrosion
M. Esmaily et al.
PROGRESS IN MATERIALS SCIENCE (2017)
On the corrosion of ZK60 magnesium alloy after severe plastic deformation
D. Merson et al.
LETTERS ON MATERIALS-PIS MA O MATERIALAKH (2017)
Effect of heat treatment on mechanical and biodegradable properties of an extruded ZK60 alloy
Junxiu Chen et al.
BIOACTIVE MATERIALS (2017)
Fatigue behaviors of HP-Mg, Mg-Ca and Mg-Zn-Ca biodegradable metals in air and simulated body fluid
Dong Bian et al.
ACTA BIOMATERIALIA (2016)
Design of magnesium alloys with controllable degradation for biomedical implants: From bulk to surface
Xia Li et al.
ACTA BIOMATERIALIA (2016)
Failure of metals II: Fatigue
Andre Pineau et al.
ACTA MATERIALIA (2016)
In situ observations of the kinetics of twinning-detwinning and dislocation slip in magnesium
A. Vinogradov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Fatigue property improvements of ZK60 magnesium alloy: Effects of thin film metallic glass
C. H. Chang et al.
THIN SOLID FILMS (2016)
Evolution of Mechanical Twinning during Cyclic Deformation of Mg-Zn-Ca Alloys
Alexei Vinogradov et al.
METALS (2016)
Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys
J. Hofstetter et al.
ACTA BIOMATERIALIA (2015)
Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys
J. Hofstetter et al.
ACTA MATERIALIA (2015)
Electrochemical corrosion behavior of biodegradable Mg-Y-RE and Mg-Zn-Zr alloys in Ringer's solution and simulated body fluid
Mohammed Ibrahim Jamesh et al.
CORROSION SCIENCE (2015)
Corrosion fatigue of a magnesium alloy in modified simulated body fluid
Sajjad Jafari et al.
ENGINEERING FRACTURE MECHANICS (2015)
Corrosion fatigue fracture of magnesium alloys in bioimplant applications: A review
R. K. Singh Raman et al.
ENGINEERING FRACTURE MECHANICS (2015)
Fracture bone healing and biodegradation of AZ31 implant in rats
C. Iglesias et al.
BIOMEDICAL MATERIALS (2015)
High-Strength Low-Alloy (HSLA) Mg-Zn-Ca Alloys with Excellent Biodegradation Performance
J. Hofstetter et al.
JOM (2014)
Mechanical integrity of magnesium alloys in a physiological environment: Slow strain rate testing based study
Lokesh Choudhary et al.
ENGINEERING FRACTURE MECHANICS (2013)
Mechanisms and Kinetics of Environmentally Assisted Cracking: Current Status, Issues, and Suggestions for Further Work
S. P. Lynch
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Magnesium alloys as body implants: Fracture mechanism under dynamic and static loadings in a physiological environment
Lokesh Choudhary et al.
ACTA BIOMATERIALIA (2012)
Magnesium alloys for temporary implants in osteosynthesis: In vivo studies of their degradation and interaction with bone
Tanja Kraus et al.
ACTA BIOMATERIALIA (2012)
Biomedical coatings on magnesium alloys - A review
H. Hornberger et al.
ACTA BIOMATERIALIA (2012)
Assessing the corrosion of biodegradable magnesium implants: A critical review of current methodologies and their limitations
N. T. Kirkland et al.
ACTA BIOMATERIALIA (2012)
Mechanistic and fractographic aspects of stress corrosion cracking
Stan Lynch
CORROSION REVIEWS (2012)
An experimental study on cyclic deformation and fatigue of extruded ZK60 magnesium alloy
Qin Yu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Chemical and electrochemical characterization of TiO2/Al2O3 atomic layer depositions on AZ-31 magnesium alloy
E. Marin et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2012)
Improvement of fatigue strength of a Mg-Zn-Zr alloy by integrated extrusion and equal-channel angular pressing
Alexei Vinogradov et al.
SCRIPTA MATERIALIA (2012)
Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing
D. Orlov et al.
ACTA MATERIALIA (2011)
Deformation mechanisms and plastic anisotropy in magnesium alloy AZ31
N. Stanford et al.
ACTA MATERIALIA (2011)
Improvement of mechanical properties of magnesium alloy ZK60 by integrated extrusion and equal channel angular pressing
Dmitry Orlov et al.
ACTA MATERIALIA (2011)
Corrosion behavior of the composite ceramic coating containing zirconium oxides on AM30 magnesium alloy by plasma electrolytic oxidation
Feng Liu et al.
CORROSION SCIENCE (2011)
Electrochemical Properties of Intermetallic Phases and Common Impurity Elements in Magnesium Alloys
A. D. Suedholz et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2011)
In vitro degradation performance and biological response of a Mg-Zn-Zr alloy
X. N. Gu et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)
Corrosion fatigue behaviors of two biomedical Mg alloys-AZ91D and WE43-In simulated body fluid
X. N. Gu et al.
ACTA BIOMATERIALIA (2010)
Developments in metallic biodegradable stents
H. Hermawan et al.
ACTA BIOMATERIALIA (2010)
The history of biodegradable magnesium implants: A review
Frank Witte
ACTA BIOMATERIALIA (2010)
A survey of bio-corrosion rates of magnesium alloys
N. T. Kirkland et al.
CORROSION SCIENCE (2010)
In vitro degradation behavior and cytocompatibility of Mg-Zn-Zr alloys
Z. G. Huan et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Changes of the texture and the mechanical properties of the extruded Mg alloy ME21 as a function of the process parameters
Michael Huppmann et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of Al and Gd Solutes on the Strain Rate Sensitivity of Magnesium Alloys
N. Stanford et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Influence of impurities on microstructure and mechanical properties of ZK60 magnesium alloy
Pan Fu-sheng et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Degradable biomaterials based on magnesium corrosion
Frank Witte et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2009)
Very high cycle fatigue behaviour of as-extruded AZ31, AZ80, and ZK60 magnesium alloys
Frantisek Novy et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
High cycle fatigue behavior of as-extruded ZK60 magnesium alloy
W. C. Liu et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Analysis of fatigue damage process in magnesium alloy AZ31
M. Matsuzuki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Technical Brief: Fatigue Dimples
Arthur Griebel
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2009)
Tensile and fatigue behaviour of wrought magnesium alloys AZ31 and AZ61
A. N. Chamos et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2008)
Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments
Md. Shahnewaz Bhuiyan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Strain Hardening and Strain-Rate Sensitivity of an Extruded Magnesium Alloy
X. Z. Lin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
Effect of composition on the texture and deformation behaviour of wrought Mg alloys
N. Stanford et al.
SCRIPTA MATERIALIA (2008)
The road to bioabsorbable stents: Reaching clinical reality?
P Erne et al.
CARDIOVASCULAR AND INTERVENTIONAL RADIOLOGY (2006)
Creep behavior of pure magnesium and Mg-Al alloys in active environments
Y Unigovski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
SR Agnew et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Microstructure and mechanical properties of extruded ZK60 magnesium alloy containing rare earth
CJ Ma et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Corrosion fatigue of extruded magnesium alloys
Y Unigovski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Understanding magnesium corrosion - A framework for improved alloy performance
GL Song et al.
ADVANCED ENGINEERING MATERIALS (2003)
Corrosion fatigue behavior of the high-strength magnesium alloy AZ 80
M Hilpert et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2000)
An overview and discussion of basic methodology for fatigue
NE Dowling et al.
FATIGUE AND FRACTURE MECHANICS: 31ST VOL (2000)
Share Paper
