Synthesis Method and Thermodynamic Characteristics of Anode Material Li3FeN2 for Application in Lithium-Ion Batteries

Article Engineering, Environmental

Facile fabrication of Fe0.8Mn1.2O3 with various nanostructures for high-performance lithium-ion batteries

Fei-Hu Du et al.

Summary: By briefly adjusting the calcination temperature of the precursor, yolk-shell, hollow, and hierarchical Fe0.8Mn1.2O3 sub-micropolyhedrons are produced, showing superior lithium-ion storage performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Fabricating nanostructured HoFeO3 perovskite for lithium-ion battery anodes via co-precipitation

Anh Tien Nguyen et al.

Summary: Nanostructured HoFeO3 perovskite was successfully prepared via co-precipitation of Fe3+ and Ho3+ ions in ethanol, followed by heat treatment. This anode material exhibited excellent electrochemical properties in lithium-ion batteries, showing high capacity retention and good rate performance.

SCRIPTA MATERIALIA (2022)

Add to Collection

Review Chemistry, Applied

Nanostructured strategies towards boosting organic lithium-ion batteries

Yujing Liu et al.

Summary: Organic electrode materials have shown great potential for lithium-ion batteries, but face intrinsic problems such as poor electronic conductivity, high dissolution, and unstable chemical characteristics. Nanostructured strategies have been employed to enhance electron and ion transport and stability, gaining increasing attention and application in organic lithium-ion based energy storage.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Self-assembled porous LiNi0.8Co0.1Mn0.1O2 cathode materials with micro/ nano-layered hollow morphologies for high-power lithium-ion batteries

Hong Gu et al.

Summary: The Ni2+/Li+ disorder is a key issue in the application of LiNi0.8Co0.1Mn0.1O2 cathode material. In this study, a novel hollow porous LiNi0.8Co0.1Mn0.1O2 material was synthesized using ammonium bicarbonate-assisted solvo/hydrothermal method with ethylene glycol (EG) and surfactant polyvinylpyrrolidone (PVP). The material showed a unique spherical-like hollow structure, expanded electrochemical active region, and inhibited Ni2+/Li+ disorder.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Electrochemistry

Crack-free single-crystal LiNi0.83Co0.10Mn0.07O2 as cycling/thermal stable cathode materials for high-voltage lithium-ion batteries

Peipei Pang et al.

Summary: By synthesizing crack-free single crystal LiNi0.83Co0.10Mn0.07O2 materials, it is possible to improve the cycling and thermal stability of batteries at high voltages, resulting in better capacity retention and cycling performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Thermodynamics

A safety performance estimation model of lithium-ion batteries for electric vehicles under dynamic compression

Li Yiding et al.

Summary: Research shows that the battery behavior under dynamic compression is significantly different from that under quasi-static compression, with the dynamic load having a strengthening effect on the battery and the equivalent strength of the battery tending to be consistent under high strain rate.

ENERGY (2021)

Add to Collection

Article Chemistry, Analytical

The effect of vanadium doping on the cycling performance of LiNi0.5Mn1.5O4 spinel cathode for high voltage lithium-ion batteries

Tayfun Kocak et al.

Summary: Vanadium-doped LMNO spinel cathode material shows excellent cycling performance at high temperatures, with higher capacity retention compared to pristine and other doped materials, indicating it is an effective solution for improving high-temperature durability.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Two-dimensional porous NiCo2O4 nanostructures for use as advanced high-performance anode material in lithium-ion batteries

Ashok Kumar Kakarla et al.

Summary: Two-dimensional porous NiCo2O4 nanostructures were investigated as an anode material for lithium-ion batteries, with the NCO-400 electrode exhibiting superior performance and reversibility due to its ultrafine thickness and highly porous structure.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Enhancing the structural stability and capacity retention of Ni-rich LiNi0.7Co0.3O2 cathode materials via Ti doping for rechargeable Li-ion batteries: Experimental and computational approaches

Muhd Firdaus Kasim et al.

Summary: Ti-doped Ni-rich cathode material LiNi0.7Co0.3O2 showed expanded lattice structure, lower cation mixing, and enhanced lithium-ion kinetics, leading to improved specific discharge capacity and capacity retention compared to pristine samples. Experimental and first principles studies indicated that Ti species can stabilize crystal structure and facilitate Li-ion movement, making Ti-doped materials promising candidates for rechargeable Li-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Chemistry, Physical

Current state of high voltage olivine structured LiMPO4 cathode materials for energy storage applications: A review

Nurbol Tolganbek et al.

Summary: This paper systematically reviews the recent progress of olivine structured cathode materials LiCoPO4 and LiNiPO4 and their potential applications in lithium ion batteries. Various strategies such as particle size manipulation, surface modification, and structure doping can improve the performance of these materials.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Analytical

Microwave-assisted hydrothermal synthesis of a high-voltage microcube LiMn1.5Ni0.5O4-8 spinel cathode material

Sungpil Woo et al.

Summary: Nickel-substituted high-voltage spinel LiMn1.5Ni0.5O4, with higher capacity and higher operating voltage, is a top choice for the next generation of high-power batteries. Microwave-assisted hydrothermal synthesis of LiMn1.5Ni0.5O4-8 allows tuning of Mn3+ concentration, but prolonged synthesis time leads to decreased structural stability and deteriorated electrochemical performance.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Analytical

Facile synthesis of 3D urchin-like V6O13 microflowers as cathode materials for high-capacity and high-rate lithium-ion batteries

Jianying Meng et al.

Summary: The urchin-like V6O13 microflowers electrode exhibits better electrochemical performance due to its multiple advantageous structural features, including large surface area, nanosized building blocks, and robust structure.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Nanostructured Sn-Mo multilayer film anode with stable electrode-interfaces for long-cycle lithium storage

Xuexia Lan et al.

Summary: The insertion of Mo protective layers and well-dispersed Mo nanoparticles in Sn-Mo film electrodes creates highly stable electrode-interfaces, leading to improved electrochemical performance and long cycle life. The Mo/Sn-Mo/Mo multilayered electrode demonstrates superior reversible capacity and capacity retention compared to previous Sn-based alloy thin film anodes, showcasing the potential for designing electrode materials for large capacity and flexible lithium-ion batteries through interfacial modification.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Materials Science, Ceramics

A review of spinel lithium titanate (Li4Ti5O12) as electrode material for advanced energy storage devices

Hui Yan et al.

Summary: With the growing demand for light, small, and high power rechargeable lithium ion batteries in electronic devices, spinel lithium titanate has attracted increasing attention as an electrode material due to its zero-strain structure, excellent cycle stability, and other appealing features. This review focuses on recent studies on spinel lithium titanate for energy storage devices, particularly on electrode redox reversibility, as well as synthesis methods and strategies for improving electrochemical performance.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Electrochemistry

A comparison of high voltage outgassing of LiCoO2, LiNiO2, and Li2MnO3 layered Li-ion cathode materials

Joseph K. Papp et al.

Summary: This study investigates the gas evolution during lithium extraction in conventional layered oxides at high voltage, highlighting significant differences in outgassing among materials, with LMO exhibiting sustained O-2 release and CO2 evolving to varying extents. This quantitative analysis emphasizes the importance of transition metal composition in understanding the chemistry of conventional Li-ion battery materials.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Effect of Li plating during formation of lithium ion batteries on their cycling performance and thermal safety

Patrick Muenster et al.

Summary: The study demonstrates that applying a 2C C-rate can reduce the formation time of lithium ion batteries, but may also result in the occurrence of lithium plating. However, using different C-rates during formation process does not significantly affect the thermal safety and cycling performance.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Wet milling synthesis of NH4CoPO4•H2O platelets: Formation reaction, growth mechanism, and conversion into high-voltage LiCoPO4 cathode for Li-ion batteries

Takahiro Kozawa et al.

Summary: The study demonstrates the synthesis of platelet-like NH4CoPO4·H2O particles via wet planetary ball milling, which are then converted into high-voltage LiCoPO4 cathodes for Li-ion batteries. The mechanical-assisted particle synthesis in solution provides a simple method for large-scale production of morphology-controlled nanomaterials.

MATERIALS RESEARCH BULLETIN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Stabilizing ultrahigh-nickel layered oxide cathodes for high-voltage lithium metal batteries

Xianhui Zhang et al.

Summary: The study demonstrates that utilizing advanced electrolyte can form protective and stable interfaces in ultra-high-Ni cathodes, which enhances the capacity retention and cycling performance of lithium metal batteries. Forming conductive electrode/electrolyte interfaces in NC cathode enables high reversible capacity.

MATERIALS TODAY (2021)

Add to Collection

Article Engineering, Chemical

Solution combustion synthesis of hierarchical porous LiFePO4 powders as cathode materials for lithium-ion batteries

M. Karami et al.

Summary: Hierarchical porous LiFePO4 powders were prepared by solution combustion method using a mixture of CTAB and glycine as fuel. The effects of fuel contents on structural, microstructural, and electrochemical properties were investigated, with an appropriate amount of mixed fuels resulting in high discharge capacity and capacity retention.

ADVANCED POWDER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Layered oxides with solid-solution reaction for high voltage potassium-ion batteries cathode

Yan-Song Xu et al.

Summary: The study introduced a novel P2-type compound potassium-ion battery cathode material KMNT, which successfully suppressed structural damage and lattice sliding by designing the cathode material lattice structure, achieving high performance and stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Flexible, nonflammable, highly conductive and high-safety double cross-linked poly(ionic liquid) as quasi-solid electrolyte for high performance lithium-ion batteries

Ling Liang et al.

Summary: A new type of bi-functional ionic liquid was synthesized and polymerized into double crosslinked poly(ionic liquid) electrolyte (PIL-PEI) by dual cross-linking method, exhibiting satisfactory flexibility, thermal stability, and remarkable electrochemical performances. The batteries assembled with PIL-PEI showed significantly improved electrochemical performances in terms of charge/discharge capacity, rate behavior, and long-term lifespan.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Free-standing and flexible CNT/(Fe@Si@SiO2) composite anodes with kernel-pulp-skin nanostructure for high-performance lithium-ion batteries

Ming Zhang et al.

Summary: In this study, a simple and scalable method was reported for preparing freestanding and flexible CNT/(Fe@Si@SiO2) composite anodes with a novel kernel-pulp-skin nanostructure for lithium-ion batteries, which significantly improved the cycle stability and rate capability of the electrode. The resulting CNT/(Fe@Si@SiO2) composite anodes exhibited a high reversible capacity and stable cycling performance, with a capacity retention of 83% after 500 cycles.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Hierarchically porous LiMn0.1Fe0.9PO4@C microspherical cathode materials prepared by a facile template-free hydrothermal method for high-performance lithium-ion batteries

Yahui Li et al.

Summary: Hierarchically porous LiMn0.1Fe0.9PO4@C microspheres were successfully prepared via a simple and scalable template-free hydrothermal route, showing high ionic and electronic conductivity and achieving very high discharge capacities.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

The effects of nanostructures on lithium storage behavior in Mn2O3 anodes for next-generation lithium-ion batteries

Jaesang Yoon et al.

Summary: Mesoporous Mn2O3 exhibits superior performance compared to bulk Mn2O3 due to its larger capacity and weaker Mn-O bond strength, leading to additional oxidation and reversible reactions during charging and cycling. Additionally, more reversible lithium storage reactions through the formation-decomposition of the electrolyte-derived surface layer occur in mesoporous Mn2O3 than in bulk Mn2O3.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

High-safety separators for lithium-ion batteries and sodium-ion batteries: advances and perspective

Lupeng Zhang et al.

Summary: This review highlights the importance of safety in lithium-ion and sodium-ion batteries, with a focus on the development of high-safety separators. It summarizes the key considerations for these separators and outlines the challenges and perspectives in their development direction.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Correlation between structural, electrical and electrochemical performance of Zn doped high voltage spinel LiNi0.5-xZnxMn1.5O4 porous microspheres as a cathode material for Li-Ion batteries

V Gajraj et al.

Summary: This study investigated the structural, electrical, and electrochemical properties of Zn doped LiNi0.5-xZnxMn1.5O4 cathode materials prepared by hydrothermal synthesis followed by low-temperature annealing. The addition of Zn affected the conductivity and specific capacity of the materials, with LiNi0.4Zn0.1Mn1.5O4 showing promising electrochemical performance for potential use in high-power lithium-ion batteries.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Hierarchically porous MXene decorated carbon coated LiFePO4 as cathode material for high-performance lithium-ion batteries

Hongwei Zhang et al.

Summary: This study successfully synthesized hierarchically porous Ti3C2Tx MXene decorated LFP@C composite, which can improve the diffusion performance and electronic conductivity of lithium-ion batteries, achieving high-rate capability and long cycling stability. The introduction of MXene sheets realized the formation of hierarchically porous structure and conductive network.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Analytical

Al/Ga co-doped V6O13 nanorods with high discharge specific capacity as cathode materials for lithium-ion batteries

Shuchao Zhang et al.

Summary: Element doping has been proven to be effective in enhancing the electrical transport properties of materials. In this study, Al/Ga co-doped V6O13 nanorods were prepared, showing improved electrochemical performance with advantages such as expanded cell volume and introduction of oxygen vacancies. The nanorods exhibited higher initial capacity and better capacity retention rate than pure phase V6O13 when used as cathode electrode material for lithium ion batteries.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Different mechanical-electrochemical coupled failure mechanism and safety evaluation of lithium-ion pouch cells under dynamic and quasi-static mechanical abuse

Mingzhe Zhou et al.

Summary: This study reveals the different behaviors of lithium-ion pouch cells under mechanicalelectrochemical coupled failure through interdisciplinary characterization methods. It uncovers the dominant role of the inertia effect of a cell?s multilayer structure in failure under dynamic loading and challenges the validity of using macroscopic inflection points in mechanical tests as indicators for failure prediction. The study sheds light on dynamic failure mechanisms and safety evaluation methods for lithium-ion cells.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

MoS2@Mo2C hybrid nanostructures formation as an efficient anode material for lithium-ion batteries

Muhammad Faizan et al.

Summary: The MoS2@Mo2C hybrid nanostructure anode fabricated through hydrothermal reaction exhibits excellent electrochemical performance in lithium ion batteries, showing good cycling stability and high rate capability.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Chemistry, Physical

Effect of low-temperature aging on the safety performance of lithium-ion pouch cells under mechanical abuse condition: A comprehensive experimental investigation

Yuanjie Liu et al.

Summary: It is important to understand how aging affects the safety performance of lithium-ion batteries under mechanical abuse. A study conducted on pouch cell batteries with different aging levels found that aged cells exhibit higher force and temperature under mechanical abuse, with faster release of electric energy after short circuit. Cells with 30% capacity fading show steep behaviors in voltage dropping and temperature increasing. Component-level mechanical tests reveal that response changes mainly come from the anode.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Comprehensively analysis the failure evolution and safety evaluation of automotive lithium ion battery

Guangfang Hu et al.

Summary: Research on the safety issues of electric vehicles found that lithium-ion battery failure is the main cause of accidents. A comprehensive battery test analytic hierarchy process model was proposed to improve EV safety.

ETRANSPORTATION (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Questions and Answers Relating to Lithium-Ion Battery Safety Issues

Wensheng Huang et al.

Summary: This article comprehensively discusses issues such as electric vehicle accidents, lithium-ion battery safety, existing safety technology, and solid-state batteries, clarifying the failure mechanisms of lithium-ion batteries and providing advice on creating safer battery systems. The aim is to promote a safer future for battery applications and a wider acceptance of electric vehicles.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Carbon coated nano-sized LiMn0.8Fe0.2PO4 porous microsphere cathode material for Li-ion batteries

Xiang Zhang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Electrochemistry

High crystallinity, preferred orientation and superior reversible capacity P2-Na0.67Ni0.25Mn0.75O2 thin film as cathode material for wide voltage sodium-ion battery

Qian Peng et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The controllable magnetic properties of Fe3N nanoparticles synthesized by a simple urea route

Xiang Lei et al.

MATERIALS RESEARCH BULLETIN (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Sodium-based dual-ion batteries via coupling high-capacity selenium/graphene anode with high-voltage graphite cathode

Xiankun Hou et al.

CHINESE CHEMICAL LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Li1.2Ni0.25Mn0.55O2: A high-capacity cathode material with a homogeneous monoclinic Li2MnO3-like superstructure

Zhi-Liang Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Recent advances of thermal safety of lithium ion battery for energy storage

Peizhao Lyu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Electrochemistry

Soft-template fabrication of hierarchical nanoparticle iron fluoride as high-capacity cathode materials for Li-ion batteries

Jinfang Lin et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

A novel hollow porous structure designed for Na0.44Mn2/3Co1/6Ni1/6O2 cathode material of sodium-ion batteries

Zhiwei Zhou et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Conductive nonconjugated radical polymer as high capacity organic cathode material for high-energy Li/Na ion batteries

Wenwen Deng et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Energy & Fuels

Development of a fixable model for the reliability and safety evaluation of the components of a commercial lithium-ion battery

Daniel O. Aikhuele

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Energy & Fuels

Solid coated Li4Ti5O12 (LTO) using polyaniline (PANI) as anode materials for improving thermal safety for lithium ion battery

Liuye Mo et al.

ENERGY REPORTS (2020)

Add to Collection

Article Chemistry, Physical

Lithium-rich layered oxide nanowires bearing porous structures and spinel domains as cathode materials for lithium-ion batteries

Boda Deng et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Li1.2Mn0.6Ni0.2O2 with 3D porous rod-like hierarchical micro/nanostructure for high-performance cathode material

Shuliang Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A novel specimen preparation of porous cathode materials in lithium-ion batteries for high-resolution transmission electron microscopy

Na Yeon Kim et al.

MATERIALS CHARACTERIZATION (2019)

Add to Collection

Article Energy & Fuels

Facile sol-gel derived nanostructured spinel Co3O4 as electrode material for high-performance supercapattery and lithium-ion storage

Vaithiyanathan Sankar Devi et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Article Materials Science, Ceramics

Porous, nitrogen-doped Li3V2(PO4)3/C cathode materials derived from oroxylum and their exceptional electrochemical properties in lithium-ion batteries

Yueqian Chen et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

Hollow porous bowl-shaped lithium-rich cathode material for lithium-ion batteries with exceptional rate capability and stability

Yao Zhang et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Electrochemistry

Mitigating voltage decay in high-capacity Li1.2Ni0.2Mn0.6O2 cathode material by surface K+ doping

Mengchu Yang et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Construction of Complex Co3O4@Co3V2O8 Hollow Structures from Metal-Organic Frameworks with Enhanced Lithium Storage Properties

Yan Lu et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Unidimensional unit cell variation and Fe+3/Fe+4 redox activity of Li3FeN2 in Li-ion batteries

N. Emery et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Challenges and Recent Progress in the Development of Si Anodes for Lithium-Ion Battery

Yan Jin et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Review Chemistry, Physical

Challenges of Spinel Li4Ti5O12 for Lithium-Ion Battery Industrial Applications

Tao Yuan et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

The interactions of Li3FeN2 with H2 and NH3

Peikun Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Electrochemical properties of micron-sized Co3O4 hollow powders consisting of size controlled hollow nanospheres

Jin-Sung Park et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Structural reinvestigation of Li3FeN2: Evidence of cationic disorder through XRD, solid-state NMR and Mossbauer spectroscopy

E. Panabiere et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2016)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Mechanochemical reactions and processing of nanostructured electrode materials for lithium-ion batteries

Nina V. Kosova

MATERIALS TODAY-PROCEEDINGS (2016)

Add to Collection

Article Chemistry, Physical

Synthesis of nanostructured Ni3S2 with different morphologies as negative electrode materials for lithium ion batteries

Wenchao Duan et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Li-ion battery materials: present and future

Naoki Nitta et al.

MATERIALS TODAY (2015)

Add to Collection

Review Chemistry, Physical

Research Progress on Negative Electrodes for Practical Li-Ion Batteries: Beyond Carbonaceous Anodes

Vanchiappan Aravindan et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Investigation of hydrogen absorption in Li7VN4 and Li7MnN4

Guang He et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Add to Collection

Article Chemistry, Physical

Mixed-metal Li3N-based systems for hydrogen storage: Li3AlN2 and Li3FeN2

Henrietta W. Langmi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Add to Collection

Article Chemistry, Physical

One-dimensional nanostructures as electrode materials for lithium-ion batteries with improved electrochemical performance

Guoxiu Wang et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection

Review Chemistry, Multidisciplinary

Nanomaterials for rechargeable lithium batteries

Peter G. Bruce et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)

Add to Collection

Review Chemistry, Physical

Safety mechanisms in lithium-ion batteries

PG Balakrishnan et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Antifluorite-type lithium chromium oxide nitrides:: Synthesis, structure, order, and electrochemical properties

J Cabana et al.

INORGANIC CHEMISTRY (2004)

Add to Collection

Article Chemistry, Physical

Ternary nitrides prepared in the Li3N-Mg3N2 system at 900-1000 K

H Yamane et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2001)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Investigation of the possible ternary nitrides in the system Li3N/Na3N

JC Schön et al.

SOLID STATE SCIENCES (2000)

Add to Collection

Synthesis Method and Thermodynamic Characteristics of Anode Material Li3FeN2 for Application in Lithium-Ion Batteries

Related references

Export Citation

Share Paper