4.6 Article

Study on Microstructure and Fatigue Properties of FGH96 Nickel-Based Superalloy

Journal

MATERIALS
Volume 14, Issue 21, Pages -

Publisher

MDPI
DOI: 10.3390/ma14216298

Keywords

synchrotron radiation X-ray imaging; fatigue performance; fatigue crack; FGH96 alloy; microstructure

Funding

  1. National Natural Science Foundation of China [51971129]
  2. Natural Science Foundation of Shanghai [19ZR1421200]

Ask authors/readers for more resources

Using synchrotron radiation X-ray imaging, this study examined the microstructure, tensile properties, and fatigue properties of FGH96 nickel-based superalloy. The alloy showed a dense structure without voids or defects, with high tensile strength and fatigue strength. Fatigue fractures exhibited characteristics of cleavage and ductile fractures, with crack propagation showing Z-shaped pattern under cyclic loading and tip passivation.
In this study, using synchrotron radiation X-ray imaging, the microstructure, tensile properties, and fatigue properties of FGH96 nickel-based superalloy were tested, and the fatigue damage mechanism was analyzed. An analysis of the experimental results shows that the alloy structure is dense without voids or other defects. It was observed that the primary gamma & PRIME; phase is distributed on the grain boundary in a chain shape, and the secondary gamma & PRIME; phase is found inside the crystal grains. The X-ray diffraction (XRD) pattern indicates that no other phases were seen except for the gamma and gamma & PRIME; phases. The tensile strength of the alloy is 1570 MPa and the elongation is 12.1%. Using data fitting and calculation, it was found that the fatigue strength of the alloy under the condition of 5 x 10(6) cycles is 620.33 MPa. A fatigue fracture has the characteristics of secondary crack, cleavage step, fatigue stripe, tire indentation, and dimple. The fracture is a mix of cleavage fracture and ductile fracture. Through a three-dimensional reconstruction of the alloy synchrotron radiation imaging area, it was found that the internal defects are small and mostly distributed at the edge of the sample. The dimple morphology is formed by cavity aggregation and cavity germination resulting from defects in the material itself, fracture of the second-phase particles, and separation of the second-phase particles from the matrix interface. By analyzing the damage mechanism of fatigue fractures, it is concluded that the cleavage step is formed by the intersection of cleavage planes formed by branch cracks, with the main crack of the confluence extending forward to form a cleavage fracture. The crack propagation path was also analyzed, and under the action of cyclic load and tip passivation, the crack shows Z-shaped propagation.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available