☆ 4.6 Article

Pulse Plasma Sintering of NiAl-Al2O3 Composite Powder Produced by Mechanical Alloying with Contribution of Nanometric Al2O3 Powder

MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

The Potential of Al2O3-ZrO2-Based Composites, Formed via CSC Method, in Linear Infrastructure Applications Based on Their Mechanical, Thermal and Environmental performance

Justyna Zygmuntowicz et al.

Summary: This study prepared Al2O3-ZrO2 composites using the centrifugal slip casting method, showing that an increase in ZrO2 content leads to a reduction in the growth of Al2O3 grains and a decrease in composite hardness. Life cycle analysis results suggest that optimizing the composite formation process can result in Al2O3-ZrO2-based pipes with more favorable environmental characteristics compared to traditional materials for linear infrastructure.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Ceramics

A novel approach to fabricate ceramic/metal interpenetrating phase composites by ultrasonic-assisted spontaneous infiltration

Yushi Qi et al.

Summary: The research combines freeze casting and ultrasonic-assisted spontaneous infiltration to fabricate cocontinuous ZrB2-SiC/Zn-5Al composites, and investigates the effects of ultrasonication duration on the microstructure and mechanical properties of the composites. The results show that the ultrasonication improves wettability and facilitates spontaneous infiltration, leading to excellent comprehensive properties in the composites with a duration of 300 seconds.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Grain growth kinetics and grain refinement mechanism in Al2O3/WC/TiC/graphene ceramic composite

Xuchao Wang et al.

Summary: This study investigated the grain growth kinetics and grain refinement mechanism of Al2O3 and WC grains in Al2O3/WC/TiC/graphene ceramic composite, revealing different grain growth mechanisms influenced by the wettability of graphene. Analysis of grain growth activation energy showed that the grain growth of Al2O3 and WC went through three stages. The grain refinement of Al2O3 grains was attributed to graphene pinning effect and intragranular structure, while the grain refinement of WC grains was due to the strong bonding interface between WC and graphene.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Properties of Mechanical Alloyed and Spark Plasma Sintered NiAl-Based Intermetallic Composites

Khadijeh Biranvand et al.

Summary: The mechanical and microstructural properties of NiAl-based intermetallic composites reinforced with graphene nanoplates were enhanced, with NiAl-1 wt.% GNPs showing the highest performance. However, an increase in graphene content to 1.5 wt.% resulted in the formation of a perovskite phase and reduced mechanical properties compared to other samples.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced interfacial wettability and mechanical properties of Ni@Al2O3/Cu ceramic matrix composites using spark plasma sintering of Ni coated Al2O3 powders

Tao Feng et al.

Summary: In this study, an interfacial engineering design methodology was employed to improve the mechanical properties of Ni@Al2O3/Cu composites. The use of Ni coated powders enhanced wettability between Cu and Al2O3, resulting in a compact network structure with good mechanical and physical properties. Improved ceramic/metal interfacial structures and enhanced elemental diffusion were identified as key mechanisms for the enhanced properties of the composites.

VACUUM (2021)

Add to Collection

Article Materials Science, Ceramics

Design and fabrication of TiB2-TiC-Al2O3 gradient composite ceramic tool materials reinforced by VC/Cr3C2 additives

Feng Gong et al.

Summary: In this study, TiB2-TiC-Al2O3 gradient composite ceramic tool materials reinforced by VC/Cr3C2 additives were prepared through vacuum hot-press sintering. The effects of gradient combination, thickness ratio, and sintering process on the mechanical properties and microstructures of the composites were investigated. The results showed that VC/Cr3C2 inhibited TiC dissolution and accelerated Al2O3 re-precipitation, influencing the grain size and porosity of the materials.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Effect of mechanically alloyed sintering aid on sinterability of TiB2

Yuki Jimba et al.

Summary: A new sintering process called TLPDS has been developed for high-melting-point borides, using a eutectic TiB-Ti powder as the sintering aid. This approach has successfully improved the sinterability of TiB2.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Energy & Fuels

FDTD modeling of sputtered Mo?Al2O3 nanocomposites

Naznin Akter et al.

Summary: This study reports on the synthesis, characterization, and modeling of Molybdenum-alumina nanocomposites for selective solar absorbers. Films with different metal volume fractions were grown and analyzed, showing that the approach accurately predicts the optical properties of the materials.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Chemistry, Physical

Characterization of Al2O3 Samples and NiAl-Al2O3 Composite Consolidated by Pulse Plasma Sintering

Katarzyna Konopka et al.

Summary: The study successfully produced Al2O3 samples and NiAl-Al2O3 composite materials using the PPS technique, showing promising results with good relative densities, high hardness, and high plasticity.

MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Effect of the sintering temperature on microstructure and properties of Al2O3-Cu-Ni hybrid composites obtained by PPS

Justyna Zygmuntowicz et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural characterization of NiAl-Al2O3 composite materials obtained by in situ aluminothermic reduction of NiO for potential coating applications

R. Troncy et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Materials Science, Ceramics

Oscillatory pressure sintering of Al2O3 ceramics

Yi Yuan et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Pinning effect of reactive elements on structural stability and adhesive strength of environmental sulfur segregation on Al2O3/NiAl interface

Z. Zhang et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Materials Science, Ceramics

Processing and mechanical properties of new hierarchical metal-graphene flakes reinforced ceramic matrix composites

A. Smirnov et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Engineering, Chemical

Nanocrystalline NiAl intermetallic alloy with high hardness produced by mechanical alloying and hot-pressing consolidation

Marek Krasnowski et al.

ADVANCED POWDER TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

NiAl-B composites with nanocrystalline intermetallic matrix produced by mechanical alloying and consolidation

Marek Krasnowski et al.

ADVANCED POWDER TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Structure and mechanical properties of TiB2/TiC - Ni composites fabricated by pulse plasma sintering method

K. Cymerman et al.

ADVANCED POWDER TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Microstructure and mechanical properties of continuous ceramic SiC and shape memory alloy NiTi hybrid fibers reinforced Ti-Al metal-intermetallic laminated composite

Yuqiang Han et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Alumina ceramics with uniform grains prepared from Al2O3 nanospheres

Zhiqiang Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

INACCURACY IN SELF-SYNCHRONISATION OF VIBRATORS OF TWO-DRIVE VIBRATORY MACHINES CAUSED BY INSUFFICIENT STIFFNESS OF VIBRATORS MOUNTING

J. Michalczyk

ARCHIVES OF METALLURGY AND MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

Development of in situ NiAl-Al2O3 nanocomposite by reactive milling and spark plasma sintering

V. Udhayabanu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Chemistry, Physical

Combustion synthesis of NiAl/Al2O3 composites by induction heating

X. Zhu et al.

INTERMETALLICS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Grain Boundaries and Mechanical Properties of Ultrafine-Grained Metals

Ruslan Z. Valiev et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)

Add to Collection

Article Automation & Control Systems

Image based analysis of complex microstructures of engineering materials

Tomasz Wejrzanowski et al.

INTERNATIONAL JOURNAL OF APPLIED MATHEMATICS AND COMPUTER SCIENCE (2008)

Add to Collection

Article Chemistry, Physical

Nanocrystalline FeAl matrix composites reinforced with TiC obtained by hot-pressing consolidation of mechanically alloyed powders

M. Krasnowski et al.

INTERMETALLICS (2007)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanical properties of nanocrystalline materials

MA Meyers et al.

PROGRESS IN MATERIALS SCIENCE (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural and mechanical characterization of plasma sprayed Al2O3-TiO2 composite ceramic coating on Mo/cast iron substrates

SC Okumus

MATERIALS LETTERS (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Improvement of the mechanical properties in a nanocrystalline NiAl intermetallic alloy with Fe, Ga and Mo additions

A Albiter et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.