☆ 4.6 Article

Study of Cutting Power and Power Efficiency during Straight-Tooth Cylindrical Milling Process of Particle Boards

MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

A multilayer transparent wood prepared by laminating two kinds of tree species

Yajing Wang et al.

Summary: Transparent wood (TW) is a new material that can be widely used as an energy-saving material, with the ability to control optical and mechanical properties through material selection and assembly methods. Multilayer transparent wood (MLTW) prepared by laminating softwood and hardwood can effectively regulate performance, with surface properties mainly determined by surface material.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Machine-learning for automatic prediction of flatness deviation considering the wear of the face mill teeth

Andres Bustillo et al.

Summary: The study used the real-time tracking feature of CNC machines to predict flatness deviation and tested various machine-learning techniques. Random Forest ensembles combined with Synthetic Minority Over-sampling Technique (SMOTE) balancing technique showed the best performance when considering industrial requirements for discretized flatness levels. SMOTE balancing technique proved to be a useful strategy in overcoming limitations caused by small experimental datasets on the accuracy of machine-learning models.

JOURNAL OF INTELLIGENT MANUFACTURING (2021)

Add to Collection

Article Automation & Control Systems

Online monitoring and multi-objective optimisation of technological parameters in high-speed milling process

Dung Hoang Tien et al.

Summary: This study presents models for investigating the effects of cutting forces and vibrations on high-speed milling processes, as well as develops a new hybrid algorithm to predict and optimize cutting parameters. High-speed milling experiments confirm the effectiveness of the proposed multi-objective prediction and optimization model, showing significant improvements in surface quality, tool life, and power consumption compared to empirical selection.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Experimental and statistical investigation of the effect of cutting parameters on surface roughness, vibration and energy consumption in machining of titanium 6Al-4V ELI (grade 5) alloy

Harun Akkus et al.

Summary: This study aimed to improve energy efficiency in turning operations by experimenting with turning titanium alloy. The research found that feed rate is the most influential parameter on surface quality, vibration, and energy consumption, with increases in vibration leading to higher surface roughness and energy consumption. The Taguchi models created were able to make accurate estimations, with surface roughness at about 82%, vibration at about 89%, and energy consumption at about 98%.

MEASUREMENT (2021)

Add to Collection

Article Forestry

Machinability of wood fiber/polyethylene composite during orthogonal cutting

Xiaolei Guo et al.

Summary: The study investigated the machinability of wood fiber/polyethylene composite material and found that the cutting depth affects the cutting efficiency and surface quality. Shallow cutting depth results in continuous cutting governed by a continuous shearing process, while deep cutting depth leads to discontinuous cutting governed by plastic fracture.

WOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Energy consumption and process characteristics of picosecond laser de-coating of cutting tools

Jinglei Ouyang et al.

Summary: This study investigates the process characteristics, energy demands, and carbon footprints in coating removal using high power picosecond laser sources with different pulse widths and wavelengths. It highlights the need to optimize total system energy consumption for the 355 nm ps laser to support its superior performance.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Multidisciplinary

A machine learning approach for vibration-based multipoint tool insert health prediction on vertical machining centre (VMC)

Abhishek Dhananjay Patange et al.

Summary: This paper presents a study on monitoring the health of multipoint tool inserts using machine learning techniques. By collecting time-domain vibration responses and extracting statistical features during face milling, a decision tree generated by the J48 algorithm is used to further classify different tool conditions.

MEASUREMENT (2021)

Add to Collection

Article Engineering, Manufacturing

Prediction of cutting power and surface quality, and optimization of cutting parameters using new inference system in high-speed milling process

Long-Hua Xu et al.

Summary: A novel intelligent system is proposed in this study for prediction and optimization of energy consumption and surface quality during high-speed milling processes, using NANFIS models for prediction and IPSO algorithm for obtaining optimal cutting parameters. Experimental results show that the predictions by NANFIS models are more accurate compared to other intelligent models, leading to improvements in cutting power, surface roughness, and milling efficiency.

ADVANCES IN MANUFACTURING (2021)

Add to Collection

Article Automation & Control Systems

Cutting forces and cutting quality in the up-milling of solid wood using ceramic cutting tools

Xiaolei Guo et al.

Summary: The study evaluated the cutting performance of Al2O3 and Si3N4 ceramic tools in machining Manchurian ash and Chinese fir, showing that cutting force and surface roughness decreased with increasing cutting speed. Si3N4 ceramic cutting tools are more suitable for cutting solid wood, especially those with extractives, providing chemical stability and improving final product quality.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Cutting Forces in Peripheral Up-Milling of Particleboard

Bartosz Palubicki

Summary: The study introduces a novel method for processing high-frequency piezoelectric force signals to analyze single chip cutting force courses in industrial CNC milling. Results indicate that higher cutting speeds lead to higher cutting forces. The cutting thrust force in peripheral up-milling of particleboard is similar to that observed in solid wood milling.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Surface Roughness Evaluation in Thin EN AW-6086-T6 Alloy Plates after Face Milling Process with Different Strategies

Daniel Chuchala et al.

Summary: The study aimed to investigate the effect of removing the outer material layers of aluminium alloy sheets on surface roughness after face milling. Significant differences in surface roughness were found among different machining strategies and rolling directions, but these differences were not statistically significant. The position of the face cutter axis during the machining process was observed to have a significant effect on surface roughness.

MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Water-Based Acrylic Acid Microcapsules on the Properties of Paint Film for Furniture Surface

Xiaoxing Yan et al.

Summary: The study observed the performance changes of water-based topcoat paint film with self-healing microcapsules on wood surface, with increasing microcapsule content resulting in variations in color difference, hardness, gloss, adhesion, impact resistance, and tensile strength. Microcapsules with a core-wall ratio of 0.67:1 showed better micromorphology and exhibited a certain repair effect. Adding microcapsules to the water-based topcoat paint film can provide technical guidance for prolonging the service life of furniture surface coatings.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Coating Process Optimization and Self-Healing Performance Evaluation of Shellac Microcapsules Coated with Melamine/Rice Husk Powder

Xiaoxing Yan et al.

Summary: The study found that water-based coatings containing shellac microcapsules have significant stability, aging resistance, and self-healing properties. With the optimal coating process and ratio, the coating can repair microcracks and inhibit the formation of surface cracks.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Review on tool condition classification in milling: A machine learning approach

Abhishek D. Patange et al.

Summary: Monitoring the health of cutting tools is crucial for modern manufacturing, ensuring accuracy and quality. The application of machine learning in health monitoring is increasingly popular, providing valuable insights for prediction and classification.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Paper & Wood

Effect of Technological Parameters on Energetic Efficiency When Planar Milling Heat-treated Oak Wood

Peter Koleda et al.

Summary: Research on heat-treated wood shows that with increased temperature, cutting power decreases. The lowest energy consumption was observed for milling wood treated at 220 degrees Celsius with specific cutting parameters.

BIORESOURCES (2021)

Add to Collection

Article Materials Science, Paper & Wood

Impact of Irregular Tooth Pitch of Circular Saw Blades on Power for Wood Cross-Cutting

Jozef Krilek et al.

DRVNA INDUSTRIJA (2020)

Add to Collection

Article Automation & Control Systems

Investigations of surface quality and energy consumption associated with costs and material removal rate during face milling of AISI 1045 steel

Danil Yu Pimenov et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Assessment of Cutting Forces and Temperature in Tapered Milling of Stone-Plastic Composite Using Response Surface Methodology

Zhaolong Zhu et al.

JOM (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Current situation and key manufacturing considerations of green furniture in China: A review

Xianqing Xiong et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Manufacturing

High-quality and high-efficiency machining of stone-plastic composite with diamond helical cutters

Zhaolong Zhu et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Materials Science, Paper & Wood

CUTTING ENERGY REQUIRED DURING THE MECHANICAL PROCESSING OF WOOD SPECIES AT DIFFERENT DRYING STAGES

Taiane Oliveira Guedes et al.

MADERAS-CIENCIA Y TECNOLOGIA (2020)

Add to Collection

Article Engineering, Manufacturing

Cutting performance in the helical milling of stone-plastic composite with diamond tools

Zhaolong Zhu et al.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of pine impregnation and feed speed on sound level and cutting power in wood sawing

Roksana Licow et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Mechanical

An investigation of cutting parameters effect on sound level, surface roughness, and power consumption during machining of hardened AISI 4140

Abidin Sahinoglu et al.

MECHANICS & INDUSTRY (2020)

Add to Collection

Article Agronomy

Multiresponse Optimization of Cutting Force and Cutting Power in Chopping Agricultural Residues Using Grey-Based Taguchi Method

Van-Dam Vu et al.

AGRICULTURE-BASEL (2020)

Add to Collection

Article Forestry

Cutting forces and chip formation revisited based on orthogonal cutting of Scots pine

Zhaolong Zhu et al.

HOLZFORSCHUNG (2019)

Add to Collection

Article Forestry

Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood

Vahid Nasir et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2019)

Add to Collection

Article Forestry

Robust optimization of energy consumption during mechanical processing of wood

Diego Jean de Melo et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2019)

Add to Collection

Article Engineering, Mechanical

Effect of rake angle on cutting performance during machining of stone-plastic composite material with polycrystalline diamond cutters

Pingxiang Cao et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Paper & Wood

The Effect of Milling Parameters and Thermal Modification on Power Input During the Milling of Thermally Modified Spruce and Oak Wood

Miroslav Sedlecky et al.

BIORESOURCES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool flank wear

D. Yu Pimenov et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

Add to Collection

Article Forestry

Employing artificial neural networks for minimizing surface roughness and power consumption in abrasive machining of wood

Sebahattin Tiryaki et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2017)

Add to Collection

Article Multidisciplinary Sciences

Response surface and neural network based predictive models of cutting temperature in hard turning

Mozammel Mia et al.

JOURNAL OF ADVANCED RESEARCH (2016)

Add to Collection

Article Materials Science, Paper & Wood

ARTIFICIAL NEURAL NETWORK MODELING TO PREDICT OPTIMUM POWER CONSUMPTION IN WOOD MACHINING

Sebahattin Tiryaki et al.

DREWNO (2016)

Add to Collection

Article Engineering, Industrial

Influence of helix angle and density variation on the cutting force in wood-based products machining

Jeremie Boucher et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

Add to Collection

Article Forestry

Bending and indentation tests to determine chipboards' mechanical strength critical stresses and their correlation to the specific cutting force in milling

KD Bouzakis et al.

WOOD SCIENCE AND TECHNOLOGY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.