Related references
Note: Only part of the references are listed.The effects of nano- and micro-sized additives on 3D printable cementitious and alkali-activated composites: a review
Pawel Sikora et al.
APPLIED NANOSCIENCE (2022)
Environmental and economic assessment on 3D printed buildings with recycled concrete
Yilong Han et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Improving performance of additive manufactured (3D printed) concrete: A review on material mix design, processing, interlayer bonding, and reinforcing methods
Shanaka Kristombu Baduge et al.
STRUCTURES (2021)
Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments
Bilal Baz et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Structural behaviour of 3D printed concrete beams with various reinforcement strategies
Lukas Gebhard et al.
ENGINEERING STRUCTURES (2021)
Mesh reinforcing method for 3D Concrete Printing
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2020)
The influence of defects at the steel/concrete interface for chloride-induced pitting corrosion of naturally-deteriorated 20-years-old specimens studied through X-ray Computed Tomography
Emanuele Rossi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
3D printing of a post-tensioned concrete girder designed by topology optimization
Gieljan Vantyghem et al.
AUTOMATION IN CONSTRUCTION (2020)
Mechanical properties of 3D printed material with binder jet technology and potential applications of additive manufacturing in seismic testing of structures
Lorenzo Del Giudice et al.
ADDITIVE MANUFACTURING (2020)
Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
Enrique Cuan-Urquizo et al.
MATERIALS (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Material characteristics of binder jet 3D printed hydrated CSA cement with the addition of fine aggregates
Joseph Ingaglio et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Digital Concrete: A Review
Timothy Wangler et al.
CEMENT AND CONCRETE RESEARCH (2019)
Binder jetting: A review of process, materials, and methods
Mohsen Ziaee et al.
ADDITIVE MANUFACTURING (2019)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Jian Hui Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
Jason T. Cantrell et al.
RAPID PROTOTYPING JOURNAL (2017)
Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-Printed ULTEM (R) 9085 Material
R. J. Zaldivar et al.
ADDITIVE MANUFACTURING (2017)
The impact of print orientation and raster pattern on fracture toughness in additively manufactured ABS
Tait D. McLouth et al.
ADDITIVE MANUFACTURING (2017)
Evaluation of Shear Strength of RC Beams with Multiple Interfaces Formed before Initial Setting Using 3D Printing Technology
Kyeongjin Kim et al.
MATERIALS (2017)
Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication
Delin Jiang et al.
ADDITIVE MANUFACTURING (2017)
Probability distribution of convection zone depth of chloride in concrete in a marine tidal environment
Yan-Hong Gao et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing
Pshtiwan Shakor et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Powder-based 3D printing for bone tissue engineering
G. Brunello et al.
BIOTECHNOLOGY ADVANCES (2016)
A framework to reduce product environmental impact through design optimization for additive manufacturing
Yunlong Tang et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Simon Ford et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Characterization of stiffness degradation caused by fatigue damage of additive manufactured parts
C. W. Ziemian et al.
MATERIALS & DESIGN (2016)
Fabrication of barium titanate by binder jetting additive manufacturing technology
S. M. Gaytan et al.
CERAMICS INTERNATIONAL (2015)
Mechanical properties of structures 3D printed with cementitious powders
Peng Feng et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
A review of the chloride transport properties of cracked concrete: experiments and simulations
Chun-ping Gu et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2015)
Building components for an outpost on the Lunar soil by means of a novel 3D printing technology
Giovanni Cesaretti et al.
ACTA ASTRONAUTICA (2014)
Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering
Arghavan Farzadi et al.
PLOS ONE (2014)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing
A. Butscher et al.
ACTA BIOMATERIALIA (2011)
Three-dimensional printing of flash-setting calcium aluminate cement
Anne-Kathrin Maier et al.
JOURNAL OF MATERIALS SCIENCE (2011)
3D Printing of cement composites
G. J. Gibbons et al.
ADVANCES IN APPLIED CERAMICS (2010)
A review of process development steps for new material systems in three dimensional printing (3DP)
Ben Utela et al.
Journal of Manufacturing Processes (2009)
Freeform construction: Mega-scale rapid manufacturing for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2007)
Share Paper
