4.6 Article

Analysis of Hydrometallurgical Methods for Obtaining Vanadium Concentrates from the Waste by Chemical Production of Vanadium Pentoxide

Related references

Note: Only part of the references are listed.
Review Metallurgy & Metallurgical Engineering

Review of Vanadium Production Part I: Primary Resources

Feng Gao et al.

Summary: This review discusses the production, clean production, and current status of the vanadium industry, providing important information for researchers. The sustainable development of the vanadium industry has significant impacts on multiple industries.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2022)

Review Green & Sustainable Science & Technology

Production of Pure Vanadium: Industry Review and Feasibility Study of Electron Beam Melt Refining of V-Al Alloys

Devin Rappleye et al.

Summary: The vanadium industry has undergone significant changes in the past two decades, with the emergence of vanadium redox flow batteries and the increasing demand for high-strength steel. Pure vanadium production is considered a potential vulnerability in certain nations, with only two identified global producers. Exploratory electron beam melt refining trials offer a potential method to produce pure vanadium with minimal processing to mitigate potential risks.

JOURNAL OF SUSTAINABLE METALLURGY (2021)

Article Materials Science, Multidisciplinary

Investigation of Vanadium-Containing Sludge Oxidation Roasting Process for Vanadium Extraction

Ulyana Kologrieva et al.

Summary: Vanadium-containing sludge is a promising technogeneous raw material for vanadium production, obtained as a by-product from vanadium slag. Various oxidation roasting methods have been studied to increase vanadium extraction into solution.

METALS (2021)

Review Engineering, Chemical

Binary and Ternary Vanadium Oxides: General Overview, Physical Properties, and Photochemical Processes for Environmental Applications

Olivier Monfort et al.

Summary: This review article provides a comprehensive report on vanadium oxides and their applications in environmental processes, highlighting their physical properties and effectiveness in photochemical processes.

PROCESSES (2021)

Article Chemistry, Physical

Physicochemical and Biological Characterization of Ti6Al4V Particles Obtained by Implantoplasty: An In Vitro Study. Part I

Jorge Toledano-Serrabona et al.

Summary: Implantoplasty releases metal debris into the peri-implant environment, with vanadium ions showing higher levels than titanium and aluminum ions, leading to cytotoxic effects on osteoblasts and fibroblasts. The metal particles exhibit different sizes, surface structures, and shapes, indicating potential harm to peri-implant tissues.

MATERIALS (2021)

Article Metallurgy & Metallurgical Engineering

Influence of Preliminary Heat Treatment of Vanadium Sludges on the Manufacturability of their Processing

U. A. Kologrieva et al.

Summary: The study focused on the oxidation roasting of vanadium sludges in hydrometallurgical production to improve vanadium recovery. Results showed that adding CaCO3 and MgO during roasting at specific temperatures was highly efficient. Optimal conditions were established for leaching vanadium from roasted sludges, resulting in high V2O5 solution concentrations suitable for obtaining vanadium concentrates through hydrolysis.

METALLURGIST (2021)

Article Chemistry, Physical

Study of Controlled Aluminum-Vanadium Alloy Prepared by Vacuum Resistance Furnace

Lanjie Li et al.

Summary: This paper investigates the synthesis of Al-V alloy using a vacuum resistance furnace, showing that controlling the heating time to 1 hour significantly improves the separation effect of the alloy and slag as well as the uniformity of the alloy composition. The composition of the alloy is affected by the Al content and CaO mass ratio, and it is suggested to utilize a vacuum resistance furnace for the industrial production of high-quality Al-V alloy.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2021)

Review Materials Science, Multidisciplinary

Extraction of the Rare Element Vanadium from Vanadium-Containing Materials by Chlorination Method: A Critical Review

Shiyuan Liu et al.

Summary: Vanadium, a rare element, is widely used in various fields such as iron and steel production, vanadium flow batteries, and catalysts. Chlorination metallurgy has wide applications in treating vanadium-containing materials, with chlorinating agents playing a crucial role in the process.

METALS (2021)

Article Materials Science, Multidisciplinary

Effective Extraction of Vanadium from Bauxite-Type Vanadium Ore Using Roasting and Leaching

Kai Zou et al.

Summary: A new bauxite-type vanadium ore was discovered in Hanzhong, China, with a novel low-temperature sulfating roasting-water leaching process developed to extract vanadium from the ore efficiently. The addition of sulfuric acid and ammonium molybdate improved the conversion and leaching efficiency, resulting in a high leaching efficiency of 90.33% under optimal test conditions. Calculation results supported the feasibility of forming NaVO3.

METALS (2021)

Review Green & Sustainable Science & Technology

A review on management and recycling of spent selective catalytic reduction catalysts

Francesco Ferella

JOURNAL OF CLEANER PRODUCTION (2020)

Article Metallurgy & Metallurgical Engineering

Direct recovery of low valence vanadium from vanadium slag - Effect of roasting on vanadium leaching

Zhenghao Wang et al.

HYDROMETALLURGY (2020)

Review Engineering, Chemical

The extraction of vanadium from titanomagnetites and other sources

Rorie Gilligan et al.

MINERALS ENGINEERING (2020)

Article Metallurgy & Metallurgical Engineering

Counterflow Leaching Technology for Vanadium from Vanadium Pentoxide Hydrometallurgical Production Slurry

U. A. Kologrieva et al.

METALLURGIST (2020)

Review Mining & Mineral Processing

A review of processing technologies for vanadium extraction from stone coal

Mingyu Wang et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY-TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY (2020)

Article Chemistry, Physical

Vanadium Chemical Compounds Forms in Wastes of Vanadium Pentoxide Production

Anton Volkov et al.

MATERIALS (2020)

Article Automation & Control Systems

Mechanical and tribological assessments of high-vanadium high-speed steel by the conventional powder metallurgy process

Shanhong Wan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Article Metallurgy & Metallurgical Engineering

Improving vanadium extraction from stone coal via combination of blank roasting and bioleaching by ARTP-mutated Bacillus mucilaginosus

Ying-bo Dong et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Article Metallurgy & Metallurgical Engineering

Effect of Degree of Oxidation and Element Form in Vanadium Slag on Its Treatment Production Capacity

A. I. Volkov et al.

METALLURGIST (2019)

Review Engineering, Environmental

A literature review on leaching and recovery of vanadium

Hao Peng

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Article Materials Science, Multidisciplinary

Vanadium Recovery from Oil Fly Ash by Carbon Removal and Roast-Leach Process

Myungwon Jung et al.

Article Metallurgy & Metallurgical Engineering

Selective reduction leaching of vanadium and iron by oxalic acid from spent V2O5-WO3/TiO2 catalyst

Wenfen Wu et al.

HYDROMETALLURGY (2018)

Article Green & Sustainable Science & Technology

Extraction of vanadium from converter slag by two-step sulfuric acid leaching process

Junyi Xiang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Materials Science, Multidisciplinary

Synthesis of As-Cast Ti-Al-V Alloy from Titanium-Rich Material by Thermite Reduction

Chu Cheng et al.

Review Green & Sustainable Science & Technology

A cleaner vanadium extraction method featuring non-salt roasting and ammonium bicarbonate leaching

Meng Li et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Metallurgy & Metallurgical Engineering

A Clean and Efficient Method for Recovery of Vanadium from Vanadium Slag: Nonsalt Roasting and Ammonium Carbonate Leaching Processes

Meng Li et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2017)

Article Metallurgy & Metallurgical Engineering

A Clean and Efficient Method for Recovery of Vanadium from Vanadium Slag: Nonsalt Roasting and Ammonium Carbonate Leaching Processes

Meng Li et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2017)

Article Biochemistry & Molecular Biology

Thirty years through vanadium chemistry

J. Costa Pessoa

JOURNAL OF INORGANIC BIOCHEMISTRY (2015)