Related references
Note: Only part of the references are listed.Studies on the influence of process parameters on the AISI 316L resistance spot-welded specimens
T. Jagadeesha et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Correlation between surface characteristics and static strength of adhesive-bonded magnesium AZ31B
Rui Zheng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
A review on resistance spot welding of magnesium alloys
S. M. Manladan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
A Novel Method for Resistance Plug Welding of 7075 Aluminum Alloy
Yueqiao Feng et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Feasibility study of dissimilar joining of aluminum alloy 5052 to pure copper via thermo-compensated resistance spot welding
Yu Zhang et al.
MATERIALS & DESIGN (2016)
Characteristics of shunting in resistance spot welding for dissimilar unequal-thickness aluminum alloys under large thickness ratio
Jing Bi et al.
MATERIALS & DESIGN (2016)
Role of zinc layer in resistance spot welding of aluminium to steel
M. R. Arghavani et al.
MATERIALS & DESIGN (2016)
Mechanical properties of dissimilar resistance spot welds of aluminum to magnesium with Sn-coated steel interlayer
M. Sun et al.
MATERIALS & DESIGN (2016)
Analysis of Al-steel resistance spot welding process by developing a fully coupled multi-physics simulation model
Jin Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Joining steel to aluminum alloy by resistance spot welding with a rivet
Ranfeng Qiu et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2015)
Weld Growth Mechanisms and Failure Behavior of Three-Sheet Resistance Spot Welds Made of 5052 Aluminum Alloy
Yang Li et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Application of Pre-heating to Improve the Consistency and Quality in AA5052 Resistance Spot Welding
Zhen Luo et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Microstructure characterization and tensile properties of Mg/Al dissimilar joints manufactured by thermo-compensated resistance spot welding with Zn interlayer
Yu Zhang et al.
MATERIALS & DESIGN (2015)
Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy
S. Palanivel et al.
MATERIALS & DESIGN (2015)
Microstructure and mechanical properties of Al/Ti joints welded by resistance spot welding
Y. Li et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2015)
Optimised design of electrode morphology for novel dissimilar resistance spot welding of aluminium alloy and galvanised high strength steel
Weihua Zhang et al.
MATERIALS & DESIGN (2015)
Microstructure and mechanical properties of resistance spot welded AZ31/AA5754 using a nickel interlayer
M. Sun et al.
MATERIALS & DESIGN (2015)
Impact of electromagnetic stirring upon weld quality of Al/Ti dissimilar materials resistance spot welding
Y. Li et al.
MATERIALS & DESIGN (2015)
Microstructure and mechanical properties of dissimilar friction stir welding of 6061-to-7050 aluminum alloys
R. I. Rodriguez et al.
MATERIALS & DESIGN (2015)
Thermal contact conductance effect in modeling of resistance spot welding process of aluminum alloy 6061-T6
M. R. Karimi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Weld-bonding of 6061 aluminium alloy
Md Faseeulla Khan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Fatigue Behavior of Dissimilar Aluminum Alloy Spot Welds
Jidong Kang et al.
ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL (2015)
Global Carbon Benefits of Material Substitution in Passenger Cars until 2050 and the Impact on the Steel and Aluminum Industries
Roja Modaresi et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)
The influence of adhesive viscosity and elastic modulus on laser spot weld bonding process
Wang Tao et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Modeling of transport phenomena and solidification cracking in laser spot bead-on-plate welding of AA6063-T6 alloy. Part I-the mathematical model
Jiangwei Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Material characterizations of mild steels, stainless steels, and both steel mixed joints under resistance spot welding (2-mm sheets)
Nachimani Charde et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Fatigue characterization and modeling of AZ31B magnesium alloy spot-welds
Seyed Behzad Behravesh et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Expulsion characterization in resistance spot welding by means of a hardness mapping technique
H. Ghazanfari et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2014)
Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints
A. M. Pereira et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2014)
Interfacial microstructure and mechanical property of resistance spot welded joint of high strength steel and aluminium alloy with 4047 AlSi12 interlayer
Weihua Zhang et al.
MATERIALS & DESIGN (2014)
Effect of external magnetic field on resistance spot welds of aluminum alloy
Yang Li et al.
MATERIALS & DESIGN (2014)
Fatigue life estimation of ultrasonic spot welded Mg alloy joints
V. K. Patel et al.
MATERIALS & DESIGN (2014)
Effect of electromagnetic stirring on the microstructures and mechanical properties of magnesium alloy resistance spot weld
Q. Yao et al.
MATERIALS & DESIGN (2014)
Analysis of Nugget Formation During Resistance Spot Welding on Dissimilar Metal Sheets of Aluminum and Magnesium Alloys
Yi Luo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Non-parametric effects on pore formation during resistance spot welding of magnesium alloy
R. Qiu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2014)
Microstructure-properties relationships in martensitic stainless steel resistance spot welds
M. Alizadeh-Sh et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2014)
Microstructure characterization and quasi-static failure behavior of resistance spot welds of AA6111-T4 aluminum alloy
Sai-nan Wu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys
Liming Liu et al.
MATERIALS (2014)
Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design
Sujit Das
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2014)
Life-Cycle Energy and Greenhouse Gas Emission Benefits of Lightweighting in Automobiles: Review and Harmonization
Hyung Chul Kim et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)
Fatigue performance and fatigue damage parameter estimation of spot welded joints of aluminium alloys 6111-T4 and 5754
Y. Shi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Effects of cone angle of truncated electrode on heat and mass transfer in resistance spot welding
YongBing Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
On Residual Stresses in Resistance Spot-Welded Aluminum Alloy 6061-T6: Experimental and Numerical Analysis
D. Afshari et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Welding parameters influence on fatigue life and microstructure in resistance spot welding of 6061-T6 aluminum alloy
R. S. Florea et al.
MATERIALS & DESIGN (2013)
Determination of the constitutive behaviour of AA6022-T4 aluminium alloy spot welds at large strains
Jidong Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Feasibility study of resistance spot welding of dissimilar Al/Mg combinations with Ni based interlayers
P. Penner et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)
Critical review of automotive steels spot welding: process, structure and properties
M. Pouranvari et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)
Joint Quality Affected by Electrode Contact Condition During Resistance Spot Welding
Peng-Sheng Wei et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2013)
Using Resistance Spot Welding for Joining Aluminium Elements in Automotive Industry
A. AMBROZIAK et al.
Archives of Civil and Mechanical Engineering (2012)
Quantifying residual stresses in resistance spot welding of 6061-T6 aluminum alloy sheets via neutron diffraction measurements
R. S. Florea et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Development of response surface model for tensile shear strength of weld-bonds of aluminium alloy 6061 T651
M. D. Faseeulla Khan et al.
MATERIALS & DESIGN (2012)
Resistance spot welding of 6061-T6 aluminum: Failure loads and deformation
R. S. Florea et al.
MATERIALS & DESIGN (2012)
The modeling and process analysis of resistance spot welding on galvanized steel sheets used in car body manufacturing
S. M. Hamidinejad et al.
MATERIALS & DESIGN (2012)
Mechanical and Metallurgical Behavior of Weld-Bonds of 6061 Aluminum Alloy
M. D. Faseeulla Khan et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Characterization of microstructure and deformation behaviour of resistance spot welded AZ31 magnesium alloy
N. Kishore Babu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of aging treatment on the microstructure and mechanical properties of the similar and dissimilar 6061-T6/7075-T651 RSW joints
Fatih Hayat
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructure Refinement After the Addition of Titanium Particles in AZ31 Magnesium Alloy Resistance Spot Welds
L. Xiao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
An approach in prediction of failure in resistance spot welded aluminum 6061-T6 under quasi-static tensile test
Davood Afshari et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
RESISTANCE SPOT WELDING OF MAGNESIUM ALLOY SHEETS WITH COVER PLATES
S. Satonaka et al.
WELDING IN THE WORLD (2012)
Nugget formation and growth during resistance spot welding of aluminium alloy 5182
M. Rashid et al.
CANADIAN METALLURGICAL QUARTERLY (2011)
Static mechanics analyses of different laser weld bonding structures in joining AZ61 Mg alloy
Liming Liu et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
Characterization of Intermetallic Compounds in Dissimilar Material Resistance Spot Welded Joint of High Strength Steel and Aluminum Alloy
Weihua Zhang et al.
ISIJ INTERNATIONAL (2011)
Influence of Welding Parameters on the Tensile Shear Strength of Aluminum Alloy Joint Welded by Resistance Spot Welding
Ranfeng Qiu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Some Tribological Influences on the Electrode-Worksheet Interface During Resistance Spot Welding of Aluminum Alloys
M. Rashid
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
A correlation study of mechanical strength of resistance spot welding of AA5754 aluminium alloy
L. Han et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Characterization of magnesium spot welds under tensile and cyclic loadings
Seyed Behzad Behravesh et al.
MATERIALS & DESIGN (2011)
Effect of governing metal thickness and stack orientation on weld quality and mechanical behaviour of resistance spot welding of AA5754 aluminium
L. Han et al.
MATERIALS & DESIGN (2011)
The effects of the welding current on heat input, nugget geometry, and the mechanical and fractural properties of resistance spot welding on Mg/Al dissimilar materials
Fatih Hayat
MATERIALS & DESIGN (2011)
Resistance spot weld fatigue behavior and dislocation substructures in two different heats of AZ31 magnesium alloy
L. Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Minimising electrode wear in resistance spot welding of aluminium alloys
R. R. Patil et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Effects of resistance spot welding parameters on microstructures and mechanical properties of dissimilar material joints of galvanised high strength steel and aluminium alloy
W. H. Zhang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
The Effects of Electrode Force on the Mechanical Behaviour of Resistance Spot-Welded 5083-O Aluminium Alloy Joints
S. Hassanifard et al.
STRAIN (2011)
Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding
L. Han et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints
A. M. Pereira et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry
L. Han et al.
MATERIALS & DESIGN (2010)
Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy
A. M. Pereira et al.
MATERIALS & DESIGN (2010)
Effects of Electrode Force on the Characteristic of Magnesium Alloy Joint Welded by Resistance Spot Welding with Cover Plates
Ranfeng Qiu et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Interfacial characterization of joint between mild steel and aluminum alloy welded by resistance spot welding
Ranfeng Qiu et al.
MATERIALS CHARACTERIZATION (2010)
Interfacial reaction layer in resistance spot welded joint between aluminium alloy and austenitic stainless steel
R. F. Qiu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2010)
Resistance-Spot-Welded AZ31 Magnesium Alloys: Part I. Dependence of Fusion Zone Microstructures on Second-Phase Particles
L. Xiao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Resistance Spot Welded AZ31 Magnesium Alloys, Part II: Effects of Welding Current on Microstructure and Mechanical Properties
L. Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Static and fatigue performance of weld bonded dual phase steel sheets
S. Sam et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate
Ranfeng Qiu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effect of interfacial reaction layer continuity on the tensile strength of resistance spot welded joints between aluminum alloy and steels
Ranfeng Qiu et al.
MATERIALS & DESIGN (2009)
The influence of reaction layer on the strength of aluminum/steel joint welded by resistance spot welding
Ranfeng Qiu et al.
MATERIALS CHARACTERIZATION (2009)
Electrode worksheet interface behaviour during resistance spot welding of Al alloy 5182
M. Rashid et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Mechanical properties and microstructures of magnesium alloy AZ31B joint fabricated by resistance spot welding with cover plates
R. F. Qiu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Simulation of welding residual stresses in resistance spot welding, FE modeling and X-ray verification
I. Ranjbar Nodeh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Effects of welding parameters on microstructure and mechanical properties of resistance spot welded magnesium alloy joints
B. Lang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)
Effect of postweld aging treatment on fatigue behavior of pulsed current welded AA7075 aluminum alloy joints
V. Balasubramanian et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
Magnesium and its alloys applications in automotive industry
Mustafa Kemal Kulekci
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Effect of welding time on microstructure and tensile shear load in resistance spot welded joints of AZ31 Mg alloy
Y. R. Wang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2007)
Microstructure characteristics of resistance spot welds of AZ31 Mg alloy
Y. R. Wang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
A review of laser welding techniques for magnesium alloys
X Cao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Residual stresses in spot welded new generation aluminium alloys - Part B - finite element simulation of residual stresses in a spot weld in 5754 aluminium alloy
X Long et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2005)
Residual stresses in spot welded new generation aluminium alloys - Part A - thermophysical and thermomechanical properties of 6111 and 5754 aluminium alloys
SK Khanna et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2005)
Review of resistance spot welding of steel sheets Part 1 Modelling and control of weld nugget formation
NT Williams et al.
INTERNATIONAL MATERIALS REVIEWS (2004)
Image analysis of electrode degradation in resistance spot welding of aluminium
S Peng et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
Electrode pitting in resistance spot welding of aluminum alloy 5182
I Lum et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Experimental simulation of surface pitting of degraded electrodes in resistance spot welding of aluminium alloys
Y Zhou et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Characteristics of weld-bonded commercial aluminum sheets (BS 1050)
SM Darwish
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2003)
Resistance spot welding of aluminium and steel: a comparative experimental study
Y Cho et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2003)
Finite element modelling of resistance spot welding of aluminium with spherical tip electrodes
A De
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2002)
Suppressing cracking in resistance welding AA5754 by mechanical means
HY Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
Recent development in aluminium alloys for the automotive industry
WS Miller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
