☆ 4.5 Article

Impact of new multiple twisted tapes on treatment of solar heat exchanger

EUROPEAN PHYSICAL JOURNAL PLUS (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Heat transfer treatment of nanomaterial with considering turbulator effects

Xue-De Luan et al.

Summary: Multi tapes were recommended as a promising technique for enhancing cross section flow in the current context. By adding copper oxide nano powders, the type of carrier fluid was changed and applying tapes and nanoparticles in the pipe can increase the residence time and enhance cooling rate. The pressure loss and S-gen,S-f increase with the growth of b and Re, while the increase of b leads to a reduction in S-gen,S-th.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Energy & Fuels

Simulation of hybrid nanofluid flow within a microchannel heat sink considering porous media analyzing CPU stability

Jinyuan Wang et al.

Summary: The article numerically investigated and compared forced convection in three different configurations of a 3D heat sink. By utilizing different porous material models and nanofluid coolant, the study evaluated the effects of material composition on the cooling performance of the heat sink.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Modeling for solidification of paraffin equipped with nanoparticles utilizing fins

Xin Liu et al.

Summary: The freezing process of paraffin within a system with fins was simulated, using CuO nano-powders to enhance conductivity. The presence of fins strengthened conduction, reducing freezing time, with the minimum required time being 65 minutes. Buoyancy had no significant impact on the freezing phenomena, but related terms were considered in equations.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Thermodynamics

A novel method for analyzing the effect of dust accumulation on energy efficiency loss in photovoltaic (PV) system

Siyuan Fan et al.

Summary: A novel analysis method for evaluating the impact of dust accumulation in PV systems is proposed in this paper. Through experiments, the model parameters are determined and the accuracy and practicality of the model are verified.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Nanofluid heat transfer within a pipe equipped with external device

Yinghong Qin

Summary: This study investigates the augmentation of turbulent intensity due to the installation of corrugated tapes, showing that the new fluid has better thermal characteristics than water. The parameters Sgen,f and Sgen,th are greatly affected by different variables, including irreversibility and Darcy factor.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Energy & Fuels

Influence of co/counter arrangements of multiple twisted-tape bundles on heat transfer intensification

S. Eiamsa-ard et al.

Summary: The experimental study showed that heat transfer intensification can be achieved by inserting multiple twisted-tape bundles into tubes, with increasing number of tapes leading to higher heat transfer rates and friction factors, while increasing twist ratio leading to decreased heat transfer performance. Counter-swirl flow twisted tape sets provided higher thermal hydraulic performance compared to co-swirl flow sets under similar operating conditions.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Add to Collection

Article Energy & Fuels

Comprehensive evaluation of flat plate and parabolic dish solar collectors' performance using different operating fluids and MWCNT nanofluid in different climatic conditions

Ping Ouyang et al.

Summary: This study comprehensively examines the performance of two solar collector systems in Beijing and Tehran, finding that both systems perform better in Tehran. Additionally, the exergy performance of the solar collector in Tehran is better than in Beijing during months of lower exergy efficiency. The Levelized Cost of Energy varies between the dish collector in Tehran with water and the flat plate collector in Beijing with Dowtherm Q, with significant differences when using alternative working fluids like MWCNT nanofluid.

ENERGY REPORTS (2021)

Add to Collection

Article Thermodynamics

Effects of injection timing and EGR on combustion and emissions characteristics of the diesel engine fuelled with acetone-butanol-ethanol/diesel blend fuels

Xiongbo Duan et al.

Summary: This study investigated the effects of different ABE ratios and injection timings on the combustion and emissions behaviors of diesel engines fueled with ABE/diesel blended fuel. The results showed that the combustion process of diesel engines fueled with ABE/diesel fuel was strongly affected by injection timing and EGR.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Numerical study on swirl cooling flow, heat transfer and stress characteristics based on fluid-structure coupling method under different swirl chamber heights and Reynolds numbers

Hong-Wei Li et al.

Summary: In this study, a three-dimensional swirl cooling model was established to simulate flow, heat transfer and stress characteristics. The temperature distribution of blade solid region was found to be closely related to swirl cooling effect, with thermal load having a significant impact on blade stress conditions. The comprehensive heat transfer factor should be considered when selecting swirl chamber height, and Reynolds number should be carefully chosen to avoid high aerodynamic losses.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Physics, Multidisciplinary

Numerical investigation on heat transfer augmentation in a triangular solar air heater tube fitted with angular-cut varied-length twisted tape

Basma Souayeh et al.

Summary: Heat transfer augmentation is a key method to improve efficiency and prevent total damage in high energy density devices. Experimental results on a triangular solar air heater tube show that inserts of angular cut and varied length twisted tape significantly influence heat transfer performance, with twist ratio and angular cut angle having notable impacts on thermohydraulic characteristics.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

CFD analysis on heat transfer and pressure drop characteristics of turbulent flow in a tube fitted with trapezoidal-cut twisted tape insert using Fe3O4 nano fluid

G. Murali et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

CFD simulation of heat transfer enhancement in circular tube with twisted tape insert by using nanofluids

A. Natarajan et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Thermodynamics

Thermal-hydraulic performances in multiple twisted tapes inserted sinusoidal rib tube heat exchangers for exhaust gas heat recovery applications

Yuxiang Hong et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Thermodynamics

Heat transfer augmentation techniques in forced flow V-trough solar collector equipped with V-cut and square cut twisted tape

A. Saravanan et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Physics, Multidisciplinary

Sensitivity analysis of radiative heat transfer in Casson and nano fluids under diffusion-thermo and heat absorption effects

Joby Mackolil et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2019)

Add to Collection

Article Thermodynamics

Intensification of thermo-hydraulic performance in heat exchanger tube inserted with multiple twisted-tapes

N. Piriyarungrod et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Effect of rotating twisted tape on thermo-hydraulic performances of nanofluids in heat-exchanger systems

Cong Qi et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Thermodynamics

Comparison of CFD simulations to experiment for heat transfer characteristics with aqueous Al2O3 nanofluid in heat exchanger tube

Sedong Kim et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental investigation of Al2O3/water nanofluids on the effectiveness of solar flat-plate collectors with and without twisted tape inserts

L. Syam Sundar et al.

RENEWABLE ENERGY (2018)

Add to Collection

Article Engineering, Mechanical

Convective heat transfer enhancement using Ag-water nanofluid in a micro-fin tube combined with non-uniform twisted tape

Smith Eiamsa-ard et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Energy & Fuels

Experimental investigation of heat transfer characteristics of the hot surface using Al2O3-water nanofluids

Mayank Modak et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2015)

Add to Collection

Article Engineering, Chemical

Thermal performance of tubular heat exchanger with multiple twisted-tape inserts

Suriya Chokphoemphun et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2015)

Add to Collection

Article Engineering, Manufacturing

Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

Add to Collection

Article Thermodynamics

Heat transfer enhancement by multiple twisted tape inserts and TiO2/water nanofluid

Smith Eiamsa-ard et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

Comparisons of system benefits and thermo-economics for exhaust energy recovery applied on a heavy-duty diesel engine and a light-duty vehicle gasoline engine

Tianyou Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Add to Collection

Article Thermodynamics

Study on thermal and fluid flow characteristics in turbulent channel flows with multiple twisted tape vortex generators

S. Eiamsa-ard

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions

Doohyun Kim et al.

CURRENT APPLIED PHYSICS (2009)

Add to Collection

Article Thermodynamics

Performance comparison of some tube inserts

LK Wang et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2002)

Add to Collection

Article Thermodynamics

Conceptions for heat transfer correlation of nanofluids

YM Xuan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.