☆ 4.8 Review

A Review of Degradation Mechanisms and Recent Achievements for Ni-Rich Cathode-Based Li-Ion Batteries

ADVANCED ENERGY MATERIALS (2021)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Strategies of Removing Residual Lithium Compounds on the Surface of Ni-Rich Cathode Materials†

Yuefeng Su et al.

Summary: Ni-rich cathode materials are promising for high-energy Li-ion batteries, but may generate residual lithium compounds (RLCs) when reacting with trace H2O and CO2. Researchers have been working on removing RLCs to improve the performance and production process of Ni-rich cathode materials.

CHINESE JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries

Chao Xu et al.

Summary: A structure-driven degradation mechanism is proposed for Ni-rich layered cathode material NMC811, in which a proportion of the material exhibits a lowered accessible state of charge and becomes fatigued after repetitive cycling. This degradation is attributed to high interfacial lattice strain between the reconstructed surface and the bulk layered structure above a distinct threshold.

NATURE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

In Operando Visualization of Cation Disorder Unravels Voltage Decay in Ni-Rich Cathodes

Ang Gao et al.

Summary: This research investigates the structural degradation mechanism in Ni-rich layered-oxide electrodes and identifies key factors influencing voltage decay, providing important insights for the development of high-capacity layered electrodes.

SMALL METHODS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Developments in Dendrite-Free Lithium-Metal Deposition through Tailoring of Micro- and Nanoscale Artificial Coatings

Melissa L. Meyerson et al.

Summary: Forty years after the failed introduction of rechargeable lithium-metal batteries and 30 years after the successful commercialization of the lower capacity, graphite-anode based lithium-ion battery by Sony, demand for higher energy density batteries is leading to reinvestigation of the problem of dendrite growth that makes the metallic lithium anodes unsafe. One strategy to mitigate dendrite growth is to deposit thin, tailored, corrosion-passivating coatings on the metallic lithium, instead of allowing the metal to spontaneously react with the organic electrolyte solution to form its passivating solid electrolyte interface (SEI).

ACS NANO (2021)

Add to Collection

Review Energy & Fuels

High-Voltage Single-Crystal Cathode Materials for Lithium-Ion Batteries

Yinzhong Wang et al.

Summary: This paper reviews the advantages, progress, and challenges of single-crystal cathodes (SCCs) for high-voltage cathode materials, as well as summarizes efforts to improve the electrochemical performance of SCCs. Providing insights into the development of high-performance cathodes for practical LIBs, this contributes to the advancement of practical LIB technologies.

ENERGY & FUELS (2021)

Add to Collection

Review Energy & Fuels

Considering Critical Factors of Silicon/Graphite Anode Materials for Practical High-Energy Lithium-Ion Battery Applications

Shenggong He et al.

Summary: Silicon has shown promising potential as an alternative to graphite anode material, yet faces challenges in commercialization, which can be addressed by integrating Si/graphite anodes, new binders, and electrolytes, and employing suitable strategies to construct Si/graphite composite materials.

ENERGY & FUELS (2021)

Add to Collection

Article Electrochemistry

Fabrication and interfacial characterization of Ni-rich thin-film cathodes for stable Li-ion batteries

Ming Jiang et al.

Summary: Ni-rich LiNi0.6Co0.2Mn0.2O2 and LiNbO3-protected thin-film cathodes were prepared by RF magnetron sputtering. The research demonstrates that the LiNbO3 layer plays a crucial role in enhancing the stability and cycling performance of cathodes.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Dually modified cathode-electrolyte interphases layers by calcium phosphate on the surface of nickel-rich layered oxide cathode for lithium-ion batteries

Hye Ji Song et al.

Summary: Using calcium phosphate as a coating precursor for surface modification improves the stability and cycling retention of layered nickel-rich cathode materials, while preventing electrolyte decomposition at high temperatures. The artificial cathode-electrolyte interphases formed during surface modification play a key role in inhibiting undesired surface reactions and enhancing electrochemical performances.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Synergistic electrolyte additives for enhancing the performance of high-voltage lithium-ion cathodes in half-cells and full-cells

Arefeh Kazzazi et al.

Summary: The research addresses the insufficient stability of the electrolyte towards oxidation in high-voltage lithium-ion cathode materials, and introduces a new combination of electrolyte additives to improve battery performance. The synergistic effect of TTSPi and TFEC additives significantly enhances cycling stability, capacity, and coulombic efficiency in lithium-ion cells with a voltage higher than 4.5 V, which can be further improved with the addition of lithium bis(oxalato)borate.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Phase Behavior during Electrochemical Cycling of Ni-Rich Cathode Materials for Li-Ion Batteries

Chao Xu et al.

Summary: The essay explores the rapid performance degradation of layered lithium nickel-rich oxides under specific stress conditions, comparing their structural properties with NMCs and NCAs. It highlights the necessity of reexamining the various high-voltage structural changes in LiNiO2 to aid understanding of accelerated degradation in Ni-rich cathodes.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Electrochemo-Mechanical Effects on Structural Integrity of Ni-Rich Cathodes with Different Microstructures in All Solid-State Batteries

Xiangsi Liu et al.

Summary: This study systematically compares the electrochemical performance and electrochemo-mechanical behavior of different types of NCM811 in ASSBs. The results demonstrate the crucial role of structural integrity in the performance and stability of electrode materials, with S-NCM811 exhibiting exceptional performance.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell

Kai Du et al.

Summary: In this study, a negative thermal expansion material (ZVO) was used as a coating layer to enhance the structure stability and electrochemical performance of Ni-rich cathode material LiNi0.6Co0.2Mn0.2 O2. The NCM622@1.0 wt % ZVO sample showed excellent cyclability and rate capability under high temperature cycling, indicating the potential of ZVO in improving the bulk structure stability and interface compatibility of modified NCM622.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Microstrain Alleviation in High-Energy Ni-Rich ma NCMA Cathode for Long Battery Life

Hoon-Hee Ryu et al.

Summary: By incorporating a hybrid structure design, the Li[Ni0.9Co0.045Mn0.045Al0.01] cathode achieves enhanced microstructure, leading to improved stability and cycling life of the battery.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Nanowelding to Improve the Chemomechanical Stability of the NiRich Layered Cathode Materials

Lifan Wang et al.

Summary: The study proposes a nanowelding strategy to enhance the capacity retention and chemomechanical stability of nickel-rich layered oxide cathode materials, while restraining the generation of active oxygenates through oxygen vacancies in ceria-based solid electrolyte. Experimental characterization confirms that this unique structure effectively prevents liquid electrolyte infiltration and eliminates adverse effects.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

High-Temperature Storage Deterioration Mechanism of Cylindrical 21700-Type Batteries Using Ni-Rich Cathodes under Different SOCs

Daozhong Hu et al.

Summary: This study found that electrolyte decomposition is the main issue affecting the performance of Ni-rich cathode batteries under high-temperature storage, with state of charge having a greater impact. Specifically, the decomposition of solute and solvent leads to the formation of hydrofluoric acid and regeneration of solid-electrolyte interphase films.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Controlling Ni2+ from the Surface to the Bulk by a New Cathode Electrolyte Interphase Formation on a Ni-Rich Layered Cathode in High-Safe and High-Energy-Density Lithium-Ion Batteries

Nan-Hung Yeh et al.

Summary: A new cathode electrolyte interphase (CEI) is developed to prevent the reduction of Ni3+ to Ni2+ on the surface of Ni-rich layered cathode, maintaining the structure and performance of the battery, and ensuring stability of Ni4+ at high temperature, leading to improved safety and cycle life of the battery. This new technology has been successfully applied in Ni-rich layered compounds, achieving high energy density in the designed cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

New Insight into Microstructure Engineering of Ni-Rich Layered Oxide Cathode for High Performance Lithium Ion Batteries

Chul-Ho Jung et al.

Summary: Phosphorous- and boron-doped Ni-rich layered cathodes with a textured microstructure show enhanced cycle stability compared to undoped cathodes. The boron-doped cathode not only suppresses microcrack formation during cycling but also exhibits better cycle stability due to its primary particle morphology that is resistant to oxygen evolution.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Kinetic Control of Long-Range Cationic Ordering in the Synthesis of Layered Ni-Rich Oxides

Suning Wang et al.

Summary: This study carefully characterized the formation pathway of Ni-rich layered ordered LiNi0.6Co0.2Mn0.2O2 and revealed the fast nonequilibrium phase transition during its formation process, which is crucial for the design and preparation of high-performance cathode materials. Understanding the kinetics of lithiation reactions and cationic ordering/disordering in cathodes may lead to new strategies for controlling the synthesis of advanced electrode materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Crossover Effects in Batteries with High-Nickel Cathodes and Lithium-Metal Anodes

Jayse Langdon et al.

Summary: The crossover of transition-metal ions has minimal effect on the lithium-metal anode in batteries with high-nickel layered-oxide cathodes, but the soluble decomposition products from the anode adversely impact the cathode, accelerating impedance growth and capacity fade. This study highlights the importance of improved battery design for lithium-metal anodes to address these crossover effects.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Robust Surface Reconstruction Induced by Subsurface Ni/Li Antisites in Ni-Rich Cathodes

Xinyan Li et al.

Summary: The study reports that surface reconstruction induced by specific antisites can suppress the outward migration of transition metals and oxygen ions, achieving a stable surface structure for layered oxide cathodes of lithium-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on the stability and surface modification of layered transition-metal oxide cathodes

Ju-Myung Kim et al.

Summary: The increasing demand for high energy density batteries and stable electrochemical performance has drawn attention to the promising candidates of layered transition metal oxides, facing challenges in stability. Various surface modification strategies have been pursued to enhance the stability of these cathode materials.

MATERIALS TODAY (2021)

Add to Collection

Article Chemistry, Physical

Fictitious phase separation in Li layered oxides driven by electro-autocatalysis

Jungjin Park et al.

Summary: Layered oxides electrodes in lithium-ion batteries are designed to be cycled under conditions avoiding phase transitions, but phase separation during delithiation has been observed, which is shown to be a dynamical artefact occurring in a many-particle system driven by autocatalytic electrochemical reactions.

NATURE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Highly-Dispersed Submicrometer Single-Crystal Nickel-Rich Layered Cathode: Spray Synthesis and Accelerated Lithium-Ion Transport

Jin Leng et al.

Summary: In this study, highly-dispersed submicron single-crystal LiNi0.8Co0.15Al0.05O2 cathode material was efficiently prepared using spray pyrolysis technique, balancing the contradiction between high crystallinity and cation disordering. The optimized SC-NCA cathode demonstrated excellent rate performance and stability, showing potential for practical applications in lithium ion batteries.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

The Electrolyte Additive Effects on Commercialized Ni-Rich LiNixCoyMnzO2 (x plus y plus z=1) Based Lithium-Ion Pouch Batteries at High Temperature

Chengyun Wang et al.

Summary: This study investigates the use of tripropargyl phosphate (TPP) as an electrolyte additive to enhance the high-temperature performance of commercialized lithium-ion pouch cells with Ni-rich cathodes. The stable anode surface film induced by the addition of TPP significantly improves the initial discharge capacity and cycling performance of the cells.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Mass-Scalable Molecular Monolayer for Ni-Rich Cathode Powder: Solution for Microcrack Failure in Lithium-Ion Batteries

Seonghun Jeong et al.

Summary: The introduction of a self-assembled molecular monolayer (SAM) on the surface of Ni-rich layered oxide improves the battery's cycle life and stability by reducing the occurrence of microcrack failures through controlling electrolyte penetration. This low-cost, mass-scalable manufacturing method is crucial for enhancing the sustainable development of electric vehicles.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Cross-Talk-Suppressing Electrolyte Additive Enabling High Voltage Performance of Ni-Rich Layered Oxides in Li-Ion Batteries

Hieu Quang Pham et al.

Summary: Control of electrode-electrolyte interfacial reactivity at high voltage is crucial for obtaining high-energy-density lithium-ion batteries. The addition of 2-aminoethyldiphenyl borate (AEDB) as an electrolyte additive has been shown to effectively stabilize both cathode and anode materials, leading to improved overall performance of the battery. The study emphasizes the importance of full-cell testing and demonstrates the significant impact of AEDB on enhancing battery performance.

CHEMSUSCHEM (2021)

Add to Collection

Article Chemistry, Physical

Revealing the structural degradation mechanism of the Ni-rich cathode surface: How thick is the surface?

Yoon-Sok Kang et al.

Summary: The thickness of the phase-change region at the surface of Ni-rich NCM/graphite cylindrical cells significantly affects battery performance, leading to a sudden degradation. The deterioration in cell performance is mainly attributed to increasing diffusion resistance in the positive electrode.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Electrochemistry

Review-Energy Storage through Graphite Intercalation Compounds

Varun Gopalakrishnan et al.

Summary: The text discusses the graphite intercalation compounds (GICs) and their applications in energy storage devices, covering topics from intercalation mechanisms to recent advancements and performance enhancement strategies of various GICs, as well as the challenges and future directions in GIC-based research.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Decoupling the degradation factors of Ni-rich NMC/Li metal batteries using concentrated electrolytes

Kun Qian et al.

Summary: Battery degradation is caused by multiple factors, with electrochemical corrosion being one of the main reasons. While highly concentrated electrolytes show promise in inhibiting aluminum corrosion, they do not significantly improve the growth of lithium dendrites or the protection of the cathode-electrolyte interphase. This study provides a paradigm for comprehensive evaluation of electrolyte performance.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Microstructure Engineered Ni-Rich Layered Cathode for Electric Vehicle Batteries

Un-Hyuck Kim et al.

Summary: The Nb doping of NCA85 modifies its particle morphology and microstructure, reducing internal strain and improving long-term cycling stability and fast charging capabilities.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries

Shouyi Yin et al.

Summary: This review discusses the challenges and solutions of modifying Ni-rich layered cathodes specifically for microcrack failure, including mechanisms of microcrack formation and evolution, recent advances in stabilizing the structure/interface of Ni-rich cathodes, and strategies to mitigate microcracks and improve electrochemical performance. Additionally, outlook and perspectives for practical application of Ni-rich layered cathodes in electric vehicles are provided.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Development of cathode-electrolyte-interphase for safer lithium batteries

Yu Wu et al.

Summary: As electric vehicle development progresses with the adoption of aggressive cathodes to improve batteries' energy density, the need to enhance safety becomes increasingly urgent. In-situ controllable formation of robust cathode-electrolyte interphase (CEI) with high inorganic content appears to be a promising strategy to address thermal runaway concerns. Emphasizing the thermal stability of cathodes after CEI modification and conducting safety tests at various levels is encouraged for comprehensive evaluation and future advancements in battery safety.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancement of Structural, Electrochemical, and Thermal Properties of High-Energy Density Ni-Rich LiNi0.85Co0.1Mn0.05O2 Cathode Materials for Li-Ion Batteries by Niobium Doping

Yehonatan Levartovsky et al.

Summary: In this study, improved structural stability, electrochemical performance, and thermal durability of LiNi0.85Co0.1Mn0.05O2 (NCM85) cathode material were achieved through niobium doping. The relationship between enhanced electrochemical performance and structural stability of the cathode particles was demonstrated. The doping with niobium in NCM85 also resulted in improved thermal characteristics and suppressed crack formation during cycling.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Chemistry, Analytical

Strategies for Dendrite-Free lithium metal Anodes: A Mini-review

Xianfa Rao et al.

Summary: This review comprehensively explains the formation mechanism of lithium dendrites and summarizes strategies for designing highly stable lithium metal anodes, including designing a stable solid electrolyte interface layer and constructing stable three-dimensional collectors. Challenges and potential for further development of stable lithium metal anodes for practical Li metal batteries are also discussed based on crucial literature.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Nonflammable functional electrolytes with all-fluorinated solvents matching rechargeable high-voltage Li-metal batteries with Ni-rich ternary cathode

Tianxiang Yang et al.

Summary: A nonflammable functional electrolyte containing fluoroethylene carbonate (FEC) and ethyl difluoroacetate (EFA) solvents was developed for rechargeable Li-metal batteries (LMBs) with LiNi(0.8)Co(0.1)Mn(0.1)O(2) cathode (NCM811), showing enhanced cycling retention and coulombic efficiency compared to fluorocarbonate-based and carbonate-based electrolytes. The FEC/EFA-based electrolyte facilitates the formation of a durable and highly fluorinated interfacial layer, promoting uniform Li deposition with less dendrites and polarization in the Li-metal anode.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Revealing two distinctive intergranular cracking mechanisms of Ni-rich layered cathode by cross-sectional scanning electron microscopy

Haoqi Wu et al.

Summary: The research found that chronic fatigue cracking dominates at low SOC, while particle bursting causes rapid saturation at high SOC. Managing individual secondary particles to prevent bursting is crucial for achieving high cycling stability of Ni-rich layered cathodes.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Chemistry, Applied

A review: Modification strategies of nickel-rich layer structure cathode (Ni ≥ 0.8) materials for lithium ion power batteries

Haijian Lv et al.

Summary: Nickel-rich layered oxides are ideal cathode materials for lithium-ion batteries, and their performance can be significantly improved through optimization of synthesis process and modification of crystal structure. This review discusses in detail the specific mechanisms of different modification strategies, providing important insights for the enhancement of lithium-ion batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Constructing a stable interfacial phase on single-crystalline Ni-rich cathode via chemical reaction with phosphomolybdic acid

Yu-Gang Zou et al.

Summary: The study demonstrates that by treating with phosphomolybdic acid, the surface chemical composition and properties of Ni-rich single-crystalline cathode can be effectively regulated, suppressing phase transformation and CEI growth during cycling, leading to improved cycle life and thermal stability of the battery.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Physical

How to avoid dendrite formation in metal batteries: Innovative strategies for dendrite suppression

Muhammad Kashif Aslam et al.

Summary: With the increasing diversity of electronic/electric appliances and large-scale energy storage systems, there is a growing demand for high-energy-density based device technology. However, metal batteries face challenges such as high anode reactivity, dendritic growth, and safety risks, with dendrite growth being a particularly severe issue.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Uncovering LiH Triggered Thermal Runaway Mechanism of a High-Energy LiNi0.5Co0.2Mn0.3O2/Graphite Pouch Cell

Lang Huang et al.

Summary: The study investigated the thermal runaway characteristics of high-energy lithium ion batteries and highlighted the importance of designing an efficient battery thermal management system to prevent heat accumulation. The presence of LiH and its exothermic reactions in the graphite anode side were identified as key factors triggering thermal runaway.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Capacity Fading Mechanisms in Ni-Rich Single-Crystal NCM Cathodes

Hoon-Hee Ryu et al.

Summary: The study found that despite the high resistance to microcracking, the electrochemical performance of single-crystal NCM cathodes is inferior to polycrystalline NCM cathodes in terms of capacity and cycling stability. During cycling, the lithium concentrations in single-crystal NCM cathodes become spatially inhomogeneous, leading to the coexistence of phases with different unit cell dimensions within a single particle, which affects lithium ion diffusion and causes rapid capacity fading.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Formation of a Stable Solid-Electrolyte Interphase at Metallic Lithium Anodes Induced by LiNbO3 Protective Layers

Ming Jiang et al.

Summary: This study demonstrated that thin-film LiNbO3 coatings can enhance the stability and cycle-life performance of Li-metal anodes in lithium-metal batteries. The protective layers inhibited the formation of unstable SEI films and controlled the degradation of Li-metal anodes, improving the overall performance of LMBs.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Cation ordered Ni-rich layered cathode for ultra-long battery life

Un-Hyuck Kim et al.

Summary: The fluorine-doped compositionally graded cathode demonstrates high discharge capacity and cycling stability, surpassing existing batteries while achieving high energy density goals. The structural and chemical stabilities of the cathode are provided by the unique microstructure and ordered mixing of lithium and transition metal ions.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Understanding the Ni-rich layered structure materials for high-energy density lithium-ion batteries

Qiqi Tao et al.

Summary: This review summarizes recent progress towards the fundamental understanding of ternary layered-structure oxides, focusing on key issues such as ion intermixing, chemo-mechanical degradation, and phase evolution on the particle surface. Possible strategies and perspectives for addressing these problems are proposed in an effort to guide the further design of advanced layered-structure oxides.

MATERIALS CHEMISTRY FRONTIERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Exploiting the Degradation Mechanism of NCM523∥ Graphite Lithium-Ion Full Cells Operated at High Voltage

Sven Klein et al.

Summary: This study investigates the failure mechanism of high-voltage NCM523 materials parallel to graphite full cells operated at 4.5 V, attributing it to thick deposits formed at the graphite anode surface from transition metals migrating from the cathode. Approaches to overcome this failure mechanism include the use of single-crystal NCM523 materials. Suppressing cross-talk phenomena in high-voltage LIB cells is crucial for achieving high cycling stability.

CHEMSUSCHEM (2021)

Add to Collection

Article Chemistry, Applied

Understanding of performance degradation of LiNi0.80Co0.10Mn0.10O2 cathode material operating at high potentials

Sheng S. Zhang

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Fluorine-incorporated interface enhances cycling stability of lithium metal batteries with Ni-rich NCM cathodes

Yongwon Lee et al.

NANO ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Investigations on the Fundamental Process of Cathode Electrolyte Interphase Formation and Evolution of High-Voltage Cathodes

Qinghao Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Interfacial Regulation of Ni-Rich Cathode Materials with an Ion-Conductive and Pillaring Layer by Infusing Gradient Boron for Improved Cycle Stability

Wen Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Electrode Degradation in Lithium-Ion Batteries

Joshua P. Pender et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Rechargeable Lithium Metal Batteries with an In-Built Solid-State Polymer Electrolyte and a High Voltage/Loading Ni-Rich Layered Cathode

Chen-Zi Zhao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Clarification of Decomposition Pathways in a State-of-the-Art Lithium Ion Battery Electrolyte through 13C-Labeling of Electrolyte Components

Jonas Henschel et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Probing the in-depth distribution of organic/inorganic molecular species within the SEI of LTO/NMC and LTO/LMO batteries: A complementary ToF-SIMS and XPS study

Nicolas Gauthier et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Improvement of electrochemical reversibility of the Ni-Rich cathode material by gallium doping

Liping Wu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Improved electrochemical performances of Ni-rich LiNi0.83Co0.12Mn0.5O2 by Mg-doping

Yeting Lv et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Lithium dendrite-free and fast-charging for high voltage nickel-rich lithium metal batteries enabled by bifunctional sulfone-containing electrolyte additives

Xiaowan Zhang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Ni-Rich Layered Cathode Materials with Electrochemo-Mechanically Compliant Microstructures for All-Solid-State Li Batteries

Sung Hoo Jung et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Ni-Rich/Co-Poor Layered Cathode for Automotive Li-Ion Batteries: Promises and Challenges

Xinxin Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Controllable solid electrolyte interphase precursor for stabilizing natural graphite anode in lithium ion batteries

Shuai Heng et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

The Role of Secondary Particle Structures in Surface Phase Transitions of Ni-Rich Cathodes

Lianfeng Zou et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing the Cycling Stability of Ni-Rich LiNi0.6Co0.2Mn0.2O2 Cathode at a High Cutoff Voltage with Ta Doping

Binbin Chu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Enhanced cyclic stability of Ni-rich lithium ion battery with electrolyte film-forming additive

Guangyuan Lan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Cathode Electrolyte Interphase Formation and Electrolyte Oxidation Mechanism for Ni-Rich Cathode Materials

Ikuma Takahashi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

Xuelei Li et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

High-Voltage-Driven Surface Structuring and Electrochemical Stabilization of Ni-Rich Layered Cathode Materials for Li Rechargeable Batteries

Seok Hyun Song et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Electrochemistry

Is Li/Graphite Half-Cell Suitable for Evaluating Lithiation Rate Capability of Graphite Electrode?

Sheng S. Zhang

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Toward a high-voltage fast-charging pouch cell with TiO2 cathode coating and enhanced battery safety

Yan Li et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tracking the Influence of Thermal Expansion and Oxygen Vacancies on the Thermal Stability of Ni-Rich Layered Cathode Materials

Eunkang Lee et al.

ADVANCED SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Electrolyte-Additive-Driven Interfacial Engineering for High-Capacity Electrodes in Lithium-Ion Batteries: Promise and Challenges

Koeun Kim et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Riveting Dislocation Motion: The Inspiring Role of Oxygen Vacancies in the Structural Stability of Ni-Rich Cathode Materials

Yuefeng Su et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Stabilizing surface chemical and structural Ni-rich cathode via a non-destructive surface reinforcement strategy

Kai Yuan et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Clean the Ni-Rich Cathode Material Surface With Boric Acid to Improve Its Storage Performance

Yuefeng Su et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture

Guannan Qian et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Electrolyte additives for improved lithium-ion battery performance and overcharge protection

Teunis van Ree

CURRENT OPINION IN ELECTROCHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of Ni-Rich Layered-Oxide Nanomaterials with Enhanced Li-Ion Diffusion Pathways as High-Rate Cathodes for Li-Ion Batteries

Ming Jiang et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Atomic-Level Understanding of Surface Reconstruction Based on Li[NixMnyCo1-x-y]O2 Single-Crystal Studies

Jian Zhu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Probing Thermal Stability of Li-Ion Battery Ni-Rich Layered Oxide Cathodes by means of Operando Gas Analysis and Neutron Diffraction

Linxiao Geng et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Synthesis and Mechanism of High Structural Stability of Nickel-Rich Cathode Materials by Adjusting Li-Excess

Zhenlu Yu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

Zifei Li et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Multidisciplinary Sciences

Surface regulation enables high stability of single-crystal lithium-ion cathodes at high voltage

Fang Zhang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Stabilizing effects of Al-doping on Ni-rich LiNi0.80Co0.15Mn0.05O2 cathode for Li rechargeable batteries

Mihee Jeong et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Efficient fast-charging of lithium-ion batteries enabled by laser-patterned three-dimensional graphite anode architectures

Kuan-Hung Chen et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Applied

Superior fast-charging capability of graphite anode via facile surface treatment for lithium-ion batteries

Jisu Kim et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Recent Progress and Perspective of Advanced High-Energy Co-Less Ni-Rich Cathodes for Li-Ion Batteries: Yesterday, Today, and Tomorrow

Ji Ung Choi et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Ni-Li anti-site defect induced intragranular cracking in Ni-rich layer-structured cathode

Qingyun Lin et al.

NANO ENERGY (2020)

Add to Collection

Article Energy & Fuels

Heuristic solution for achieving long-term cycle stability for Ni-rich layered cathodes at full depth of discharge

Un-Hyuck Kim et al.

NATURE ENERGY (2020)

Add to Collection

Review Chemistry, Physical

Design Strategies of Safe Electrolytes for Preventing Thermal Runaway in Lithium Ion Batteries

Xiaolu Tian et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode

Yujing Bi et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

In-situ construction of hierarchical cathode electrolyte interphase for high performance LiNi0.8Co0.1Mn0.1O2/Li metal battery

Min Mao et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Stable lithium metal anode enabled by high-dimensional lithium deposition through a functional organic substrate

Peiyu Zhao et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Multifunctional electrolyte additive for improved interfacial stability in Ni-rich layered oxide full-cells

Hieu Quang Pham et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Electrochemistry

Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries

Tianyu Li et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

Xiang Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Identifying the Origins of Microstructural Defects Such as Cracking within Ni-Rich NMC811 Cathode Particles for Lithium-Ion Batteries

Thomas M. M. Heenan et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries

Marissa Wood et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Problems and their origins of Ni-rich layered oxide cathode materials

Sheng S. Zhang

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Off-stoichiometric TiO2-x-decorated graphite anode for high-power lithium-ion batteries

Dong Young Rhee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Significance of Electrolyte Additive Molecule Structure in Constructing Robust Interphases on High-Voltage Cathodes

Jianhui Li et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Flaky and Dense Lithium Deposition Enabled by a Nanoporous Copper Surface Layer on Lithium Metal Anode

Feihu Guo et al.

ACS MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In situsynthesis of a nickel concentration gradient structure of Ni-rich LiNi0.8Co0.15Al0.05O2with promising superior electrochemical properties at high cut-off voltage

Kang Wu et al.

NANOSCALE (2020)

Add to Collection

Review Electrochemistry

Degradation and Aging Routes of Ni-Rich Cathode Based Li-Ion Batteries

Philipp Teichert et al.

BATTERIES-BASEL (2020)

Add to Collection

Article Chemistry, Physical

Dendrite-free lithium deposition by coating a lithiophilic heterogeneous metal layer on lithium metal anode

Feihu Guo et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Collapse of LiNi1-x-yCoxMnyO2 Lattice at Deep Charge Irrespective of Nickel Content in Lithium-Ion Batteries

Wangda Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Radially Oriented Single-Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium-Ion Batteries

Xing Xu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Microstructural visualization of compositional changes induced by transition metal dissolution in Ni-rich layered cathode materials by high-resolution particle analysis

Dong-Su Ko et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing High-Voltage Performance of Ni-Rich Cathode by Surface Modification of Self-Assembled NASICON Fast Ionic Conductor LiZr2(PO4)3

Jiafeng Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Adiponitrile (C6H8N2): A New Bi-Functional Additive for High-Performance Li-Metal Batteries

Seon Hwa Lee et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Chemical, Structural, and Electronic Aspects of Formation and Degradation Behavior on Different Length Scales of Ni-Rich NCM and Li-Rich HE-NCM Cathode Materials in Li-Ion Batteries

Lea de Biasi et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ni-stabilizing additives for completion of Ni-rich layered cathode systems in lithium-ion batteries: An Ab initio study

Dong Young Kim et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Synergy of doping and coating induced heterogeneous structure and concentration gradient in Ni-rich cathode for enhanced electrochemical performance

Yong-Chun Li et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Concentration Gradient Cathodes: Microstructure‐Controlled Ni‐Rich Cathode Material by Microscale Compositional Partition for Next‐Generation Electric Vehicles (Adv. Energy Mater. 15/2019)

Un‐Hyuck Kim et al.

Advanced Energy Materials (2019)

Add to Collection

Article Chemistry, Physical

Improving the reversibility of the H2-H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability

Feng Wu et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries

Takahiro Yoshinari et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Altering Surface Contaminants and Defects Influences the First-Cycle Outgassing and Irreversible Transformations of LiNi0.6Mn0.2Co0.2O2

Sara E. Renfrew et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

High-Rate Structure-Gradient Ni-Rich Cathode Material for Lithium-Ion Batteries

Yuefeng Su et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Shaodian Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries

Hongyang Li et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Electrochemistry

An in-depth analysis detailing the structural and electrochemical properties within Br- modified LiNi0.815Co0.15A0.035O2 (NCA) cathode material

Shiyu He et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Dynamic Lithium Distribution upon Dendrite Growth and Shorting Revealed by Operando Neutron Imaging

Bohang Song et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries

A-Young Kim et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Batteries: Controllable Cathode–Electrolyte Interface of Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 for Lithium Ion Batteries: A Review (Adv. Energy Mater. 39/2019)

Hirbod Maleki Kheimeh Sari et al.

Advanced Energy Materials (2019)

Add to Collection

Review Chemistry, Multidisciplinary

A Review of Carbon-Based Materials for Safe Lithium Metal Anodes

Yan Liu et al.

FRONTIERS IN CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Capacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent

Gyeong Won Nam et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Review Chemistry, Physical

Progress of enhancing the safety of lithium ion battery from the electrolyte aspect

Qingsong Wang et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Bisalt ether electrolytes: a pathway towards lithium metal batteries with Ni-rich cathodes

Judith Alvarado et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Emergence of graphene as a promising anode material for rechargeable batteries: a review

M. R. Al Hassan et al.

MATERIALS TODAY CHEMISTRY (2019)

Add to Collection

Article Electrochemistry

Nickel, Manganese, and Cobalt Dissolution from Ni-Rich NMC and Their Effects on NMC622-Graphite Cell

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Quantification of Surface Oxygen Depletion and Solid Carbonate Evolution on the First Cycle of LiNi0.6Mn0.2Co0.2O2 Electrodes

Sara E. Renfrew et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Electrochemistry

Stable and Safe Lithium Metal Batteries with Ni-Rich Cathodes Enabled by a High Efficiency Flame Retardant Additive

Yuan Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing the high-voltage electrochemical performance of the LiNi0.5Co0.2Mn0.3O2 cathode materials via hydrothermal lithiation

Yongxiang Chen et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Stabilization of Lithium-Metal Batteries Based on the in Situ Formation of a Stable Solid Electrolyte Interphase Layer

Seong-Jin Park et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Electrochemical Properties of the LiNi0.6Co0.2Mn0.2O2 Cathode Material Modified by Lithium Tungstate under High Voltage

Jiale Fu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Artificial Soft-Rigid Protective Layer for Dendrite-Free Lithium Metal Anode

Rui Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Review Engineering, Environmental

A review on manifold synthetic and reprocessing methods of 3D porous graphene-based architecture for Li-ion anode

Wanwei Jiang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

Capacity Fading of Ni-Rich Li[NixCoyMn1-x-y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

Hoon-Hee Ryu et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Silyl-group functionalized organic additive for high voltage Ni-rich cathode material

Seol Heui Jang et al.

CURRENT APPLIED PHYSICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteries

Junhyeok Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Volume Changes of Graphite Anodes Revisited: A Combined Operando X-ray Diffraction and In Situ Pressure Analysis Study

Simon Schweidler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Physical

Anode-originated SEI migration contributes to formation of cathode electrolyte interphase layer

Shuyu Fang et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Urea-based hydrothermal synthesis of LiNi0.5Co0.2Mn0.3O2 cathode material It for Li-ion battery

Yang Shi et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Dual-function ethyl 4,4,4-trifluorobutyrate additive for high-performance Ni-rich cathodes and stable graphite anodes

Koeun Kim et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li-S batteries

Eunho Cha et al.

NATURE NANOTECHNOLOGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries

Xiulin Fan et al.

NATURE NANOTECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Intrinsic origin of intra-granular cracking in Ni-rich layered oxide cathode materials

Kyoungmin Min et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

Add to Collection

Article Chemistry, Physical

N-Doped Graphene Modified 3D Porous Cu Current Collector toward Microscale Homogeneous Li Deposition for Li Metal Anodes

Rui Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Nickel-Rich Cathodes: Prospect and Reality of Ni-Rich Cathode for Commercialization (Adv. Energy Mater. 6/2018)

Junhyeok Kim et al.

Advanced Energy Materials (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Surfactant-Assisted Synthesis of High Energy {010} Facets Beneficial to Li-Ion Transport Kinetics with Layered LiNi0.6Co0.2Mn0.2O2

Xiaokang Ju et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Energy & Fuels

Effect of Residual Lithium Rearrangement on Ni-rich Layered Oxide Cathodes for Lithium-Ion Batteries

Jun-Ho Park et al.

ENERGY TECHNOLOGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Synergistic Effect of F- Doping and LiF Coating on Improving the High-Voltage Cycling Stability and Rate Capacity of LiNi0.5Co0.2Mn0.3O2 Cathode Materials for Lithium-Ion Batteries

Kai Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Electrochemistry

Improving the cycling stability of Ni-rich cathode materials by fabricating surface rock salt phase

Yuefeng Su et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Capacity Degradation Mechanism and Cycling Stability Enhancement of AIF3-Coated Nanorod Gradient Na[Ni0.65Co0.08Mn0.27]O2 Cathode for Sodium-Ion Batteries

Ho-Hyun Sun et al.

ACS NANO (2018)

Add to Collection

Article Electrochemistry

Preformed Anodes for High-Voltage Lithium-Ion Battery Performance: Fluorinated Electrolytes, Crosstalk, and the Origins of Impedance Rise

Adam Tornheim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

An Artificial Solid Electrolyte Interphase with High Li-Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes

Yayuan Liu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

In Situ Probing and Synthetic Control of Cationic Ordering in Ni-Rich Layered Oxide Cathodes

Jianqing Zhao et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Towards High-Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy

Dong Wang et al.

ADVANCED SCIENCE (2017)

Add to Collection

Review Chemistry, Physical

Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives

Seung-Taek Myung et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Origin of Structural Degradation During Cycling and Low Thermal Stability of Ni-Rich Layered Transition Metal-Based Electrode Materials

Mudit Dixit et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Operando Monitoring of Early Ni-mediated Surface Reconstruction in Layered Lithiated Ni-Co-Mn Oxides

Daniel Streich et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Li metal coated with amorphous Li3PO4 via magnetron sputtering for stable and long-cycle life lithium metal batteries

Liping Wang et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Understanding the crack formation of graphite particles in cycled commercial lithium-ion batteries by focused ion beam - scanning electron microscopy

Na Lin et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Advanced Micro/Nanostructures for Lithium Metal Anodes

Rui Zhang et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

High-Energy Ni-Rich Li[NixCoyMn1-x-y]O2 Cathodes via Compositional Partitioning for Next-Generation Electric Vehicles

Chong S. Yoon et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Impact of Microcrack Generation and Surface Degradation on a Nickel-Rich Layered Li[Ni0.9Co0.05Mn0.05]O2 Cathode for Lithium-Ion Batteries

Ho-Hyun Sun et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Electrochemistry

A Mild Surface Washing Method Using Protonated Polyaniline for Ni-rich LiNi0.8Co0.1Mn0.1O2 Material of Lithium Ion Batteries

Sheng Xu et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Suppressing the Structure Deterioration of Ni-Rich LiNi0.8Co0.1Mn0.1O2 through Atom-Scale Interfacial Integration of Self-Forming Hierarchical Spinel Layer with Ni Gradient Concentration

Jicheng Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Chemistry, Physical

High-Energy Density Core-Shell Structured Li[Ni0.95Co0.025Mn0.025]O2 Cathode for Lithium-Ion Batteries

Do-Wook Jun et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Formation and Inhibition of Metallic Lithium Microstructures in Lithium Batteries Driven by Chemical Crossover

Wangda Li et al.

ACS NANO (2017)

Add to Collection

Review Chemistry, Physical

A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries

Arumugam Manthiram et al.

ENERGY STORAGE MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Optimized Temperature Effect of Li-Ion Diffusion with Layer Distance in Li(NixMnyCoz)O2 Cathode Materials for High Performance Li-Ion Battery

Suihan Cui et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A Review of Solid Electrolyte Interphases on Lithium Metal Anode

Xin-Bing Cheng et al.

ADVANCED SCIENCE (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Surface Surgery of the Nickel-Rich Cathode Material LiNi0.815Co0.15Al0.035O2: Toward a Complete and Ordered Surface Layered Structure and Better Electrochemical Properties

Zhongfeng Tang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Unraveling the Origin of Instability in Ni-Rich LiNi1-2xCoxMnxO2 (NCM) Cathode Materials

Chaoping Liang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection

Article Chemistry, Physical

The effect of diamond-like carbon coating on LiNi0.8Co0.15Al0.05O2 particles for all solid-state lithium-ion batteries based on Li2S-P2S5 glass-ceramics

Heidy Visbal et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Chemistry, Physical

Re-heating effect of Ni-rich cathode material on structure and electrochemical properties

Jae Hyeon Jo et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries

Wen Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Chemistry, Physical

Effect of Al2O3 Coating on Stabilizing LiNi0.4Mn0.4Co0.2O2 Cathodes

Anna M. Wise et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium metal anodes for rechargeable batteries

Wu Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Electrochemistry

Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2

Dae-Hyun Cho et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin Two-Dimensional Atomic Crystals as Stable Interfacial Layer for Improvement of Lithium Metal Anode

Kai Yan et al.

NANO LETTERS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Interconnected hollow carbon nanospheres for stable lithium metal anodes

Guangyuan Zheng et al.

NATURE NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Physical

Surface structural disordering in graphite upon lithium intercalation/deintercalation

Vijay A. Sethuraman et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Chemistry, Physical

Theoretical Insight into Oxidative Decomposition of Propylene Carbonate in the Lithium Ion Battery

Lidan Xing et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2009)

Add to Collection

Article Chemistry, Physical

Estimation of electronegativity values of elements in different valence states

Keyan Li et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2006)

Add to Collection

Article Electrochemistry

Thermal decomposition of LiPF6-based electrolytes for lithium-ion batteries

CL Campion et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Add to Collection

Article Electrochemistry

Influence of manganese(II), cobalt(II), and nickel(II) additives in electrolyte on performance of graphite anode for lithium-ion batteries

S Komaba et al.

ELECTROCHIMICA ACTA (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.