Related references
Note: Only part of the references are listed.3D bioprinting of hepatocytes: core-shell structured co-cultures with fibroblasts for enhanced functionality
Rania Taymour et al.
SCIENTIFIC REPORTS (2021)
Strategies to Control or Mimic Growth Factor Activity for Bone, Cartilage, and Osteochondral Tissue Engineering
Kelly B. Seims et al.
BIOCONJUGATE CHEMISTRY (2021)
Articular cartilage and osteochondral tissue engineering techniques: Recent advances and challenges
Wenying Wei et al.
BIOACTIVE MATERIALS (2021)
Development of Nanosilicate-Hydrogel Composites for Sustained Delivery of Charged Biopharmaceutics
Samuel T. Stealey et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
3D printing of patient-specific implants for osteochondral defects: workflow for an MRI-guided zonal design
David Kilian et al.
BIO-DESIGN AND MANUFACTURING (2021)
An improved method to isolate primary human osteocytes from bone
Anne Bernhardt et al.
BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK (2020)
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
David Chimene et al.
ADVANCED MATERIALS (2020)
A Novel Plasma-Based Bioink Stimulates Cell Proliferation and Differentiation in Bioprinted, Mineralized Constructs
Tilman Ahlfeld et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Bisphosphonate nanoclay edge-site interactions facilitate hydrogel self-assembly and sustained growth factor localization
Yang-Hee Kim et al.
NATURE COMMUNICATIONS (2020)
3D Bioprinting of osteochondral tissue substitutes - in vitro-chondrogenesis in multi-layered mineralized constructs
David Kilian et al.
SCIENTIFIC REPORTS (2020)
Overexpression of bone morphogenetic protein 3 (BMP-3) via raav-mediated gene transfer on the osteochondrogenic fate of human bone marrow-derived mesenchymal stem cells
J.K. Venkatesan et al.
OSTEOARTHRITIS AND CARTILAGE (2020)
3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration
Fiona E. Freeman et al.
SCIENCE ADVANCES (2020)
Scaffold-Mediated Gene Delivery for Osteochondral Repair
Henning Madry et al.
PHARMACEUTICS (2020)
Nanoclay-based 3D printed scaffolds promote vascular ingrowth ex vivo and generate bone mineral tissue in vitro and in vivo
Gianluca Cidonio et al.
BIOFABRICATION (2020)
Combining multi-scale 3D printing technologies to engineer reinforced hydrogel-ceramic interfaces
Paweena Diloksumpan et al.
BIOFABRICATION (2020)
Recent advances in kartogenin for cartilage regeneration
Gaorui Cai et al.
JOURNAL OF DRUG TARGETING (2019)
Pore-forming bioinks to enable spatio-temporally defined gene delivery in bioprinted tissues
T. Gonzalez-Fernandez et al.
JOURNAL OF CONTROLLED RELEASE (2019)
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Gianluca Cidonio et al.
BIOFABRICATION (2019)
Osteochondral lesions of the talus
G. M. M. J. Kerkhoffs et al.
KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY (2019)
Investigating the effect of sterilisation methods on the physical properties and cytocompatibility of methyl cellulose used in combination with alginate for 3D-bioplotting of chondrocytes
Ella Hodder et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
Development of a Coaxial 3D Printing Platform for Biofabrication of Implantable Islet-Containing Constructs
Xiao Liu et al.
ADVANCED HEALTHCARE MATERIALS (2019)
A definition of bioinks and their distinction from biomaterial inks
J. Groll et al.
BIOFABRICATION (2019)
Laponite nanoparticle-associated silated hydroxypropylmethyl cellulose as an injectable reinforced interpenetrating network hydrogel for cartilage tissue engineering
Cecile Boyer et al.
ACTA BIOMATERIALIA (2018)
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
Fei Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Detection of carious lesions utilizing depolarization imaging by polarization sensitive optical coherence tomography
Jonas Golde et al.
JOURNAL OF BIOMEDICAL OPTICS (2018)
3D printed cell-laden collagen and hybrid scaffolds for in vivo articular cartilage tissue regeneration
YoungWon Koo et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)
Biphasic Scaffolds from Marine Collagens for Regeneration of Osteochondral Defects
Anne Bernhardt et al.
MARINE DRUGS (2018)
3D bioprinting mesenchymal stem cell-laden construct with core-shell nanospheres for cartilage tissue engineering
Wei Zhu et al.
NANOTECHNOLOGY (2018)
Bioprinting of mineralized constructs utilizing multichannel plotting of a self-setting calcium phosphate cement and a cell-laden bioink
Tilman Ahlfeld et al.
BIOFABRICATION (2018)
Volumetric non-local-means based speckle reduction for optical coherence tomography
Carlos Cuartas-Velez et al.
BIOMEDICAL OPTICS EXPRESS (2018)
Iterative feedback bio-printing-derived cell-laden hydrogel scaffolds with optimal geometrical fidelity and cellular controllability
Ling Wang et al.
SCIENTIFIC REPORTS (2018)
Coaxial Cell Printing of Freestanding, Perfusable, and Functional In Vitro Vascular Models for Recapitulation of Native Vascular Endothelium Pathophysiology
Ge Gao et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments
Wanjun Liu et al.
BIOFABRICATION (2018)
Three-dimensional plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions
Kathleen Schuetz et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
3D Printing From MRI Data: Harnessing Strengths and Minimizing Weaknesses
Beth Ripley et al.
JOURNAL OF MAGNETIC RESONANCE IMAGING (2017)
Bioprinting Using Mechanically Robust Core-Shell Cell-Laden Hydrogel Strands
Pritesh Mistry et al.
MACROMOLECULAR BIOSCIENCE (2017)
The use of a cartilage decellularized matrix scaffold for the repair of osteochondral defects: the importance of long-term studies in a large animal model
R. A. Vindas Bolanos et al.
OSTEOARTHRITIS AND CARTILAGE (2017)
Covalent Binding of Bone Morphogenetic Protein-2 and Transforming Growth Factor-3 to 3D Plotted Scaffolds for Osteochondral Tissue Regeneration
Andrea Di Luca et al.
BIOTECHNOLOGY JOURNAL (2017)
Improved Imaging of Magnetically Labeled Cells Using Rotational Magnetomotive Optical Coherence Tomography
Peter Cimalla et al.
APPLIED SCIENCES-BASEL (2017)
Development of a clay based bioink for 3D cell printing for skeletal application
T. Ahlfeld et al.
BIOFABRICATION (2017)
An Innovative Collagen-Based Cell-Printing Method for Obtaining Human Adipose Stem Cell-Laden Structures Consisting of Core Sheath Structures for Tissue Engineering
MyungGu Yeo et al.
BIOMACROMOLECULES (2016)
BMP2 induces chondrogenic differentiation, osteogenic differentiation and endochondral ossification in stem cells
Nian Zhou et al.
CELL AND TISSUE RESEARCH (2016)
A Review of the Clinical Side Effects of Bone Morphogenetic Protein-2
Aaron W. James et al.
TISSUE ENGINEERING PART B-REVIEWS (2016)
Automated quantitative assessment of three-dimensional bioprinted hydrogel scaffolds using optical coherence tomography
Ling Wang et al.
BIOMEDICAL OPTICS EXPRESS (2016)
Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint
Jin-Hyung Shim et al.
BIOFABRICATION (2016)
A versatile method for combining different biopolymers in a core/shell fashion by 3D plotting to achieve mechanically robust constructs
Ashwini Rahul Akkineni et al.
BIOFABRICATION (2016)
Behaviour of laponite gels: Rheology, ageing, pH effect and phase state in the presence of dispersant
Pek-Ing Au et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering
Joydip Kundu et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)
Induction of Osteogenic Differentiation in Human Mesenchymal Stem Cells by Crosstalk with Osteoblasts
Martina Glueck et al.
BIORESEARCH OPEN ACCESS (2015)
Degree of polarization uniformity with high noise immunity using polarization-sensitive optical coherence tomography
Shuichi Makita et al.
OPTICS LETTERS (2014)
Transforming Growth Factor Beta- Releasing Scaffolds for Cartilage Tissue Engineering
Henning Madry et al.
TISSUE ENGINEERING PART B-REVIEWS (2014)
In situ optical coherence tomography of percutaneous implant-tissue interfaces in a murine model
Sabine Donner et al.
BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK (2013)
Metre-long cell-laden microfibres exhibit tissue morphologies and functions
Hiroaki Onoe et al.
NATURE MATERIALS (2013)
Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats
Michelle T. Poldervaart et al.
PLOS ONE (2013)
Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering
Yongxiang Luo et al.
BIOFABRICATION (2013)
Promiscuity and specificity in BMP receptor activation
Thomas D. Mueller et al.
FEBS LETTERS (2012)
TGF-β and BMP Signaling in Osteoblast Differentiation and Bone Formation
Guiqian Chen et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL SCIENCES (2012)
Fiji: an open-source platform for biological-image analysis
Johannes Schindelin et al.
NATURE METHODS (2012)
Clay Gels For the Delivery of Regenerative Microenvironments
Jonathan I. Dawson et al.
ADVANCED MATERIALS (2011)
Tissue integration of growth factor-eluting layer-by-layer polyelectrolyte multilayer coated implants
Mara L. Macdonald et al.
BIOMATERIALS (2011)
Measurements and Theoretical Interpretation of Points of Zero Charge/Potential of BSA Protein
Andrea Salis et al.
LANGMUIR (2011)
Enhancement of Bone Morphogenetic Protein-2-Induced Ectopic Bone Formation by Transforming Growth Factor-β1
Keita Tachi et al.
TISSUE ENGINEERING PART A (2011)
Effect of scaffold architecture and BMP-2/BMP-7 delivery on in vitro bone regeneration
Pinar Yilgor et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Chondrogenic potential of bone marrow- and adipose tissue-derived adult human mesenchymal stem cells
M. C. Ronziere et al.
BIO-MEDICAL MATERIALS AND ENGINEERING (2010)
BMP-2 Enhances TGF-beta 3-Mediated Chondrogenic Differentiation of Human Bone Marrow Multipotent Mesenchymal Stromal Cells in Alginate Bead Culture
Bojiang Shen et al.
TISSUE ENGINEERING PART A (2009)
Introducing a single-cell-derived human mesenchymal stem cell line expressing hTERT after lentiviral gene transfer
Wolfgang Böcker et al.
JOURNAL OF CELLULAR AND MOLECULAR MEDICINE (2008)
Dual growth factor delivery and controlled scaffold degradation enhance in vivo bone formation by transplanted bone marrow stromal cells
CA Simmons et al.
BONE (2004)
Share Paper
