4.7 Article

Corrosion behavior of Mg−Li alloys: A review

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Corrosion behavior of a novel Mg-13Li-X alloy with different grain sizes by rapid solidification rate

Bao-Liang Wu et al.

Summary: This study focuses on the corrosion behavior of a novel Mg-13Li-X alloy fabricated by a rapid solidification process. The results show that the grain size of the alloy significantly affects its corrosion resistance. Smaller grain size leads to more positive corrosion potential and lower corrosion current density, indicating better corrosion resistance.

RARE METALS (2022)

Article Materials Science, Multidisciplinary

Improvement of Microstructure, Mechanical Property and Corrosion Resistance of Mg-9Li-3Al-1Ca Alloy Through Centrifugal Casting

Zhenduo Ma et al.

Summary: The study showed that centrifugal casting of Mg-9Li-3Al-1Ca alloy leads to refined microstructure, improved mechanical properties, and decreased corrosion current. The centrifugal casting alloy exhibits superior comprehensive properties compared to gravity casting, with increased ultimate tensile strength and elongation, and decreased galvanic corrosion.

METALS AND MATERIALS INTERNATIONAL (2021)

Article Metallurgy & Metallurgical Engineering

Effect of the Al-Si eutectic on the microstructure and corrosion behavior of the single-phase Mg alloy Mg-4Li

Cheng Zhang et al.

Summary: The influence of alloying with Al-Si eutectic on the microstructure and corrosion resistance of single-phase Mg-4Li was studied. Al-Si eutectic caused the formation of Mg2Si and Mg-Al phase, leading to changes in grain orientation and decreased corrosion resistance due to galvanic corrosion from the precipitates and texture change.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Effect of lithium content on the mechanical and corrosion behaviors of HCP binary Mg-Li alloys

Chuanqiang Li et al.

Summary: In this study, the microstructure, crystallographic texture, mechanical properties, and corrosion resistance of as-extruded HCP Mg-xLi (x = 1, 3, 5; in wt%) alloys were investigated. The results showed that the Mg-5Li alloy with high lithium content exhibited a low degree of dynamic recrystallization and strong prismatic texture, leading to higher mechanical strength along the extrusion direction. Additionally, the high lithium content improved the corrosion resistance of the alloy and mitigated groove-like corrosion.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Effect of rolling ratios on the microstructural evolution and corrosion performance of an as-rolled Mg-8 wt.%Li alloy

B. J. Wang et al.

Summary: The influence of rolling ratios on microstructural changes and corrosion behavior of an as-rolled Mg-8 wt.%Li alloy in 0.1 mol/L NaCl solution was investigated. It was found that as the rolling ratio increased, the alpha-Mg phases elongated and fragmented, leading to decreased corrosion performance. The corrosion process can be divided into two stages, with initial corrosion mainly occurring in beta-Li phases and later transferring to the alpha-Mg phases.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Microstructure and corrosion resistance of a duplex structured Mg-7.5Li-3Al-1Zn

Anna Dobkowska et al.

Summary: The study found that the relative composition of Mg-7.5Li-3Al-1Zn alloy changed after extrusion and post-processing annealing, with an increase in beta(Li) content leading to improved corrosion resistance.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Materials Science, Multidisciplinary

Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of α-Mg based Mg-Li alloys for primary Mg-air batteries

Huabao Yang et al.

Summary: The corrosion and discharge behavior of two alpha-Mg based Mg-Li alloys with different microstructural features were investigated. Grain boundaries were found to contribute equally to these processes and were preferentially attacked. The LAZ531 alloy showed high and steady discharge voltage at small discharge current density.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Synergistically improved damping, elastic modulus and mechanical properties of rolled Mg-8Li-4Y-2Er-2Zn-0.6Zr alloy with twins and long-period stacking ordered phase

Dan Wang et al.

Summary: The Mg-8Li-4Y-2Er-2Zn-0.6Zr alloy exhibits high damping capacity, tensile strength and elastic modulus after heat treatment and cold rolling processes. The introduction of LPSO phase and formation of twins during cold rolling contribute to the improvement in damping capacity and tensile strength. The high elastic modulus of the cold-rolled alloy can be attributed to the effects of LPSO phase and cold rolling.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

Simultaneously improved mechanical strength and corrosion resistance of Mg-Li-Al alloy by solid solution treatment

C. Q. Li et al.

Summary: Solid solution treatment significantly improves the tensile strength and corrosion resistance of Mg-Li-Al alloy. The enhanced corrosion resistance is mainly attributed to the combined effect of the absence of micro-galvanic couples and the protective surface film.

MATERIALS LETTERS (2021)

Article Optics

A novel Ni2MnCuSnAl0.1 multi-principal element alloy coating to enhance the wear resistance and corrosion resistance of Mg-Li alloy

Xin Wen et al.

Summary: A novel Ni2MnCuSnAl0.1 multi-principal element alloy coating and a multi-step ultrasonic assisted laser cladding technique were proposed to overcome the deficiencies of evaporation and dilution of substrate in laser-cladded coatings on Mg-Li alloys. The synthesized Ni2MnCuSnAl0.1 MPEA coatings on Mg-Li alloy exhibited improved corrosion resistance, hardness, and wear resistance compared to the Mg-Li alloy.

OPTICS AND LASER TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Microstructural evolution, mechanical properties and corrosion behavior of as-cast Mg-5Li-3Al-2Zn alloy with different Sn and Y addition

Xiang Peng et al.

Summary: The influences of Sn and Y on LAZ532 alloy were investigated, showing improved mechanical properties and corrosion resistance. LAZ532-0.8Sn-1.2Y alloy demonstrated the best mechanical properties and corrosion resistance, with the smallest corrosion current density and the lowest anodic dissolution rate.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

The composition-dependent oxidation film formation in Mg-Li-Al alloys

Song Tang et al.

Summary: The study found that in Mg-Li-Al alloys, diffusion of alloying elements resulted in different matrix zones, with oxidation behavior in single-phase zones mainly influenced by Li concentration variations. Thicker oxidation films observed in the duplex diffusion zone compared to single-phase zones were due to accelerated oxidation.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Role of microalloyed Sm in enhancing the corrosion resistance of hot-rolled Mg-8Sn-1Al-1Zn alloy

Jaeho Kwon et al.

Summary: The corrosion resistance of hot-rolled Mg?8Sn?1Al?1Zn alloy was significantly enhanced by Sm microalloying, mainly due to a reduced H2 evolution rate caused by the presence of Al8Fe4Sm particles instead of Al5Fe2 particles which accelerate microgalvanic corrosion.

CORROSION SCIENCE (2021)

Article Electrochemistry

Corrosion behavior of a eutectic Mg-8Li alloy in NaCl solution

Linjie Dong et al.

Summary: The corrosion behavior of alpha-Mg and beta-Li phases in a duplex Mg-8Li alloy was investigated in this study. Results showed that the alpha-Mg phase is more prone to corrosion, while the beta-Li phase has a protective surface film and exhibits intergranular corrosion.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

Article Materials Science, Multidisciplinary

Dealloying corrosion of anodic and nanometric Mg41Nd5 in solid solution-treated Mg-3Nd-1Li-0.2Zn alloy

Gui-Jia Gao et al.

Summary: The microstructure and chemical compositions of solid solution-treated Mg-3Nd-1Li-0.2Zn alloy were investigated, and corrosion behavior was studied under different conditions. Results showed changes in grain size and volume fraction of the second phase under different treatments, with the formation of Nd-containing oxide film and dense corrosion product layer on the alloy surface.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Effect of Y and Ce on the microstructure, mechanical properties and anisotropy of as-rolled Mg-8Li-1Al alloy

Feng Zhong et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Metallurgy & Metallurgical Engineering

Effect of Al on the microstructure, corrosion behavior and mechanical properties of Mg-4Li

Cheng Zhang et al.

ANTI-CORROSION METHODS AND MATERIALS (2020)

Article Materials Science, Multidisciplinary

On the in-situ aqueous stability of an Mg-Li-(Al-Y-Zr) alloy: Role of Li

Y. M. Yan et al.

CORROSION SCIENCE (2020)

Article Materials Science, Multidisciplinary

Microstructure and corrosion behavior of as-homogenized Mg-xLi-3Al-2Zn-0.2Zr alloys (x=5, 8, 11 wt%)

Yuehua Sun et al.

MATERIALS CHARACTERIZATION (2020)

Article Engineering, Biomedical

Local intragranular misorientation accelerates corrosion in biodegradable Mg

Wenhui Wang et al.

ACTA BIOMATERIALIA (2020)

Article Materials Science, Multidisciplinary

Microstructure and corrosion behavior of as-extruded Mg-xLi-3Al-2Zn-0.2Zr alloys (x=5, 8, 11 wt.%)

Yuehua Sun et al.

CORROSION SCIENCE (2020)

Article Chemistry, Physical

Effects of alloying elements on the microstructure and corrosion behavior of Mg-Li-Al-Y alloys

Yuqing He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Impact of rare-earth elements on the corrosion performance of binary magnesium alloys

Hiba Azzeddine et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

High specific strength Mg-Li-Zn-Er alloy processed by multi deformation processes

Qing Ji et al.

MATERIALS CHARACTERIZATION (2020)

Article Metallurgy & Metallurgical Engineering

Enhanced Electromagnetic Interference Shielding in a Duplex-Phase Mg-9Li-3Al-1Zn Alloy Processed by Accumulative Roll Bonding

Jiahao Wang et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

Review Metallurgy & Metallurgical Engineering

Formulation of corrosion rate of magnesium alloys using microstructural parameters

Ahmad Bahmani et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Article Chemistry, Physical

Microstructure and corrosion behavior of as-extruded Mg-6.5Li-xY-yZn alloys

Jinguang Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

Modification of Mn on corrosion and mechanical behavior of biodegradable Mg88Y4Zn2Li5 alloy with long-period stacking ordered structure

Jiaxin Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Effect of heat-treatment on microstructure, mechanical and tribological properties of Mg-Li-Al based alloy

Rita Maurya et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Metallurgy & Metallurgical Engineering

The transformation of LPSO type in Mg-4Y-2Er-2Zn-0.6Zr and its response to the mechanical properties and damping capacities

Dan Wang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Article Nanoscience & Nanotechnology

Combination effects of Yb addition and cryogenic-rolling on microstructure and mechanical properties of LA141 alloy

Siyuan Jin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Metallurgy & Metallurgical Engineering

Effect of rolling reduction and annealing process on microstructure and corrosion behavior of LZ91 alloy sheet

Li-na MA et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

Article Materials Science, Multidisciplinary

Anisotropic corrosion behavior of hot-rolled Mg-8 wt.%Li alloy

Baojie Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Metallurgy & Metallurgical Engineering

Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3A1-(1,2,3)Sn alloys

Xiao-yang Chen et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

Article Metallurgy & Metallurgical Engineering

Comparison on corrosion resistance and surface film of pure Mg and Mg-14Li alloy

Chuan-qiang LI et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

Review Materials Science, Multidisciplinary

The development of β phase Mg-Li alloys for ultralight corrosion resistant applications

Taylor W. Cain et al.

NPJ MATERIALS DEGRADATION (2020)

Article Electrochemistry

Discharge and Corrosion Behaviors of Mg-Li and Mg-Li-La Alloys as Anodes for Seawater Battery

Juxin Yu et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)

Review Materials Science, Multidisciplinary

What activates the Mg surface-A comparison of Mg dissolution mechanisms

Jufeng Huang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Influence of the lithium content on the negative difference effect of Mg-Li alloys

C. Q. Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Electrochemistry

Enhancement of Corrosion Resistance and Discharge Performance of Mg-5Li-3Al-1Zn Sheet for Mg-air Battery via Rolling

Huabao Yang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Materials Science, Multidisciplinary

Significantly improved corrosion resistance of Mg-15Gd-2Zn-0.39Zr alloys: Effect of heat-treatment

Jing Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Metallurgy & Metallurgical Engineering

Recent progress in Mg-Li matrix composites

Yue-hua Sun et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Article Engineering, Industrial

Microstructure, tensile properties and corrosion behavior of friction stir processed Mg-9Li-1Zn alloy

Gang Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Article Metallurgy & Metallurgical Engineering

Effect of Grain Size and Secondary Particle Refinement on Corrosion Behavior of Cross-rolled Mg-Li-Ca Alloy

D. Dhamodharan et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

Article Electrochemistry

Corrosion Performance of as-rolled Mg-8Li-xAl Alloys

Zilong Zhao et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2019)

Article Metallurgy & Metallurgical Engineering

Effect of Hot Extrusion on the Microstructure, Mechanical Properties, and Corrosion Behavior of Mg-11Li-3Al-2Zn-1.5Nd-0.2Zr Alloy

Xue Lei et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

Article Chemistry, Physical

Characterisation of Li in the surface film of a corrosion resistant Mg-Li(-Al-Y-Zr) alloy

Y. Yan et al.

APPLIED SURFACE SCIENCE (2019)

Article Materials Science, Multidisciplinary

Effect of Ca Content on the Mechanical Properties and Corrosion Behaviors of Extruded Mg-7Li-3Al Alloys

Xiaoming Xiong et al.

METALS (2019)

Article Materials Science, Multidisciplinary

Investigating the Structure of the Surface Film on a Corrosion Resistant Mg-Li(-Al-Y-Zr) Alloy

Y. M. Yan et al.

CORROSION (2019)

Review Metallurgy & Metallurgical Engineering

Research Progress on the Corrosion Behavior of Magnesium-Lithium-Based Alloys: A Review

Bao-Jie Wang et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)

Article Metallurgy & Metallurgical Engineering

Effect of Li content on microstructure and mechanical property of Mg-xLi-3(Al-Si) alloys

Cheng Zhang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Article Materials Science, Biomaterials

In Vitro and in Vivo Evaluation of Multiphase Ultrahigh Ductility Mg-Li-Zn Alloys for Cardiovascular Stent Application

Jingyao Wu et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

Article Materials Science, Multidisciplinary

In vitro degradation and biocompatibility of Mg-Li-Ca alloys-the influence of Li content

Lanyue Cui et al.

SCIENCE CHINA-MATERIALS (2018)

Article Materials Science, Biomaterials

In Vitro and in Vivo Evaluation of Multiphase Ultrahigh Ductility Mg-Li-Zn Alloys for Cardiovascular Stent Application

Jingyao Wu et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

Article Electrochemistry

Composition and microstructure dependent corrosion behaviour of Mg-Li alloys

C. Q. Li et al.

ELECTROCHIMICA ACTA (2018)

Article Electrochemistry

Corrosion Resistance of as-rolled Mg-Li-AlSi Alloys

Zilong Zhao et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)

Article Materials Science, Multidisciplinary

Exfoliation corrosion of extruded Mg-Li-Ca alloy

Zi-You Ding et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

Effect of Zr Addition on the Corrosion Behavior of Extruded Mg Alloys in NaCl Solution

Seok-Hoan Jeong et al.

MATERIALS TRANSACTIONS (2018)

Review Engineering, Aerospace

Recent advances in the development of aerospace materials

Xuesong Zhang et al.

PROGRESS IN AEROSPACE SCIENCES (2018)

Article Materials Science, Coatings & Films

Self-degradation of micro-arc oxidation/chitosan composite coating on Mg-4Li-1Ca alloy

Chi Yu et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Metallurgy & Metallurgical Engineering

Influence of Ca on microstructure and corrosion resistance of Mg-14Li alloy

Tian-shun Dong et al.

CHINA FOUNDRY (2018)

Article Materials Science, Multidisciplinary

Effect of Lithium on the Discharge and Corrosion Behavior of Mg-3wt.% Al Alloy as the Anode for Seawater Activated Battery

Ri-chu Wang et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

Proceedings Paper Materials Science, Multidisciplinary

Relationship between Microstructure and Exfoliation Corrosion in Mg-14mass%Li-3mass%Al Cold-Rolled Alloy

Yuki Sekiguchi et al.

THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2018)

Article Materials Science, Multidisciplinary

Influence of neodymium on microstructure and corrosion behavior of Mg-8Li-3Al-2Zn alloy

M. Y. Gu et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2017)

Article Materials Science, Multidisciplinary

Influence of yttrium addition on the corrosion behaviour of as-cast Mg-8Li-3Al-2Zn alloy

M. Gu et al.

MATERIALS SCIENCE AND TECHNOLOGY (2017)

Article Chemistry, Physical

Effect of texture symmetry on mechanical performance and corrosion resistance of magnesium alloy sheet

Junjie He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Metallurgy & Metallurgical Engineering

Influence of Al-Si additions on mechanical properties and corrosion resistance of Mg-8Li dual-phase alloys

Zi-long Zhao et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2017)

Article Materials Science, Multidisciplinary

Effect of Icosahedral Phase on Crystallographic Texture and Mechanical Anisotropy of Mg-4%Li Based Alloys

C. Q. Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Pitting corrosion of a Rare Earth Mg alloy GW93

Yingwei Song et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Article Metallurgy & Metallurgical Engineering

Effect of thermal-mechanical processing on microstructure and mechanical properties of duplex-phase Mg-8Li-3Al-0.4Y alloy

Hong-bo Ding et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

Article Metallurgy & Metallurgical Engineering

Corrosion behavior and surface treatment of superlight Mg-Li alloys

Yue-hua Sun et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

Article Materials Science, Multidisciplinary

Effect of rolling-induced microstructure on corrosion behaviour of an as-extruded Mg-5Li-1Al alloy sheet

Qing Xiang et al.

CORROSION SCIENCE (2017)

Article Chemistry, Physical

Detection and distribution of lithium in Mg-Li-Al based alloy by ToF-SIMS

Vinod Kumar

APPLIED SURFACE SCIENCE (2016)

Article Materials Science, Multidisciplinary

Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions

Koji Hagihara et al.

CORROSION SCIENCE (2016)

Article Materials Science, Multidisciplinary

Corrosion behavior of as-cast Mg-8Li-3Al+xCe alloy in 3.5wt% NaCl solution

S. Manivannan et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2016)

Article Materials Science, Multidisciplinary

Effect of Al Composition on the Corrosion Resistance of Mg-14 mass% Li System Alloy

Taiki Morishige et al.

MATERIALS TRANSACTIONS (2016)

Article Materials Science, Multidisciplinary

Microstructure, mechanical properties, and corrosion resistance of Mg-9Li-3Al-1.6Y alloy

Hao-Miao Yang et al.

RARE METALS (2016)

Review Materials Science, Multidisciplinary

Review of Recent Developments in the Field of Magnesium Corrosion

Andrej Atrens et al.

ADVANCED ENGINEERING MATERIALS (2015)

Article Materials Science, Multidisciplinary

Influence of hot rolling on the corrosion behavior of several Mg-X alloys

Fuyong Cao et al.

CORROSION SCIENCE (2015)

Article Materials Science, Multidisciplinary

The influence of pH on the corrosion rate of high-purity Mg, AZ91 and ZE41 in bicarbonate buffered Hanks' solution

Sean Johnston et al.

CORROSION SCIENCE (2015)

Article Chemistry, Physical

The effect of extension twinning on the electrochemical corrosion properties of Mg-Y alloys

Guodong Zou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

News Item Chemistry, Physical

MAGNESIUM ALLOYS Ready for the road

Gerald S. Frankel

NATURE MATERIALS (2015)

Article Chemistry, Physical

A high-specific-strength and corrosion-resistant magnesium alloy

Wanqiang Xu et al.

NATURE MATERIALS (2015)

Review Materials Science, Multidisciplinary

Recent progress in magnesium-lithium alloys

R. Wu et al.

INTERNATIONAL MATERIALS REVIEWS (2015)

Article Materials Science, Multidisciplinary

Corrosion and characterisation of dual phase Mg-Li-Ca alloy in Hank's solution: The influence of microstructural features

Rong-Chang Zeng et al.

CORROSION SCIENCE (2014)

Article Metallurgy & Metallurgical Engineering

Microstructures and corrosion resistance of three typical superlight Mg-Li alloys

Zhikun Qu et al.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2014)

Article Materials Science, Multidisciplinary

Effect of Impurity Fe Concentration on the Corrosion Behavior of Mg-14 mass%Li-1 mass%Al Alloy

Taiki Morishige et al.

MATERIALS TRANSACTIONS (2014)

Article Materials Science, Multidisciplinary

In vitro corrosion of Mg-1.21Li-1.12Ca-1Y alloy

Rongchang Zeng et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2014)

Article Chemistry, Physical

The electrochemical behaviors of Mg-8Li-3Al-0.5Zn and Mg-8Li-3Al-1.0Zn in sodium chloride solution

Yanzhuo Lv et al.

JOURNAL OF POWER SOURCES (2013)

Article Chemistry, Physical

The electrochemical behaviors of Mg-8Li-0.5Y and Mg-8Li-1Y alloys in sodium chloride solution

Yanzhuo Lv et al.

JOURNAL OF POWER SOURCES (2013)

Article Materials Science, Multidisciplinary

Exfoliation Corrosion Behavior of Cold-Rolled Mg-14 mass% Li-1 mass% Al Alloy in NaCl Solution

Taiki Morishige et al.

MATERIALS TRANSACTIONS (2013)

Article Engineering, Biomedical

Influence of the grain size on the in vivo degradation behaviour of the magnesium alloy LAE442

Berit Ullmann et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2013)

Article Materials Science, Multidisciplinary

Crystal orientation and electrochemical corrosion of polycrystalline Mg

Guang-Ling Song et al.

CORROSION SCIENCE (2012)

Article Materials Science, Multidisciplinary

Grain size distribution effects on the corrosion behaviour of materials

Srikant Gollapudi

CORROSION SCIENCE (2012)

Article Materials Science, Multidisciplinary

Analysis of the surface film formed on Mg by exposure to water using a FIB cross-section and STEM-EDS

M. Taheri et al.

CORROSION SCIENCE (2012)

Article Materials Science, Multidisciplinary

Corrosion resistance of Mg-8.8Li alloy compared with AZ91

Y. W. Song et al.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2011)

Article Chemistry, Physical

The electrochemical behaviors of Mg, Mg-Li-Al-Ce and Mg-Li-Al-Ce-Y in sodium chloride solution

Yanzhuo Lv et al.

JOURNAL OF POWER SOURCES (2011)

Article Metallurgy & Metallurgical Engineering

Electroless Ni-P plating on Mg-Li alloy by two-step method

Luo Hong-jie et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

Article Metallurgy & Metallurgical Engineering

Effects of ultrasonic vibration on solidification structure and properties of Mg-8Li-3Al alloy

Yao Lei et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

Article Materials Science, Multidisciplinary

The influence of yttrium (Y) on the corrosion of Mg-Y binary alloys

Ming Liu et al.

CORROSION SCIENCE (2010)

Article Electrochemistry

Crystallographic orientation and electrochemical activity of AZ31 Mg alloy

Guang-Ling Song et al.

ELECTROCHEMISTRY COMMUNICATIONS (2010)

Article Nanoscience & Nanotechnology

Revealing the relationship between grain size and corrosion rate of metals

K. D. Ralston et al.

SCRIPTA MATERIALIA (2010)

Article Materials Science, Multidisciplinary

Corrosion characterization of Mg-8Li alloy in NaCl solution

Yingwei Song et al.

CORROSION SCIENCE (2009)

Article Chemistry, Physical

Investigation of surface oxide film on magnesium lithium alloy

Yingwei Song et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Chemistry, Physical

The corrosion of a novel Mg-11Li-3Al-0.5RE alloy in alkaline NaCl solution

Lili Gao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Chemistry, Physical

The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy

G. Ben Hamu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Materials Science, Multidisciplinary

Corrosion of pure Mg as a function of grain size and processing route

C. op't Hoog et al.

ADVANCED ENGINEERING MATERIALS (2008)

Article Engineering, Biomedical

In vitro and in vivo corrosion measurements of magnesium alloys

F Witte et al.

BIOMATERIALS (2006)

Article Engineering, Biomedical

In vivo corrosion of four magnesium alloys and the associated bone response

F Witte et al.

BIOMATERIALS (2005)

Review Materials Science, Multidisciplinary

Understanding magnesium corrosion - A framework for improved alloy performance

GL Song et al.

ADVANCED ENGINEERING MATERIALS (2003)

Article Materials Science, Multidisciplinary

Pilling-Bedworth ratio for oxidation of alloys

CH Xu et al.

MATERIALS RESEARCH INNOVATIONS (2000)