Related references
Note: Only part of the references are listed.Investigation into the effect of energy density on densification, surface roughness and loss of alloying elements of 7075 aluminium alloy processed by laser powder bed fusion
Gan Li et al.
OPTICS AND LASER TECHNOLOGY (2022)
Microstructure refinement and corrosion resistance improvement mechanisms of a novel Al-Si-Fe-Mg-Cu-Zn alloy prepared by ultrasonic vibration-assisted rheological die-casting process
Mingfan Qi et al.
CORROSION SCIENCE (2021)
Single-track investigation of IN738LC superalloy fabricated by laser powder bed fusion: Track morphology, bead characteristics and part quality
Chuan Guo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
When can Chinese competitors catch up? Market and capability ladders and their implications for multinationals
Peter J. Williamson et al.
BUSINESS HORIZONS (2021)
A novel rheological high pressure die-casting process for preparing large thin-walled Al-Si-Fe-Mg-Sr alloy with high heat conductivity, high plasticity and medium strength
Mingfan Qi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Current Progress in Rheoforming of Wrought Aluminum Alloys: A Review
Gan Li et al.
METALS (2020)
Improvement in mechanical, thermal conductivity and corrosion performances of a new high-thermally conductive Al-Si-Fe alloy through a novel R-HPDC process
Mingfan Qi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Multiphase modelling of the transient flow for Sn-15Pb and 357.0 alloys in semi-solid die casting process
Wenying Qu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Microstructural evolution mechanism of semi-solid slurry: a study using Phase-Field-Lattice-Boltzmann scheme
Wenying Qu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles
Qiyang Tan et al.
ACTA MATERIALIA (2020)
Microstructure Evolution of a Semisolid Magnesium Alloy Slurry Obtainedviaan Internal Rapid Cooling Stirring Process (IRCSP)
Xiangjie Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
Pei Wang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
A Comparison Between Semisolid Casting Methods for Aluminium Alloys
Anders E. W. Jarfors
METALS (2020)
Microstructures refinement and mechanical properties enhancement of aluminum and magnesium alloys by combining distributary-confluence channel process for semisolid slurry preparation with high pressure die-casting
Mingfan Qi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Alleviating the misallocation of R&D inputs in China's manufacturing sector: From the perspectives of factor-biased technological innovation and substitution elasticity
Zhenbing Yang et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2020)
Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity
Wenwen Sun et al.
SCIENCE (2019)
Tensile properties and microstructure of rheo-diecast 7075 alloy prepared by serpentine channel process
Wei-min Mao et al.
CHINA FOUNDRY (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
An in situ investigation of the solute suppressed nucleation zone in an Al-15 wt% Cu alloy inoculated by Al-Ti-B
Yiwang Jia et al.
SCRIPTA MATERIALIA (2019)
Mold-Slug Interfacial Heat Transfer Characteristics of Different Coating Thicknesses: Effects on Slug Temperature and Microstructure in Swirled Enthalpy Equilibration Device Process
Min Luo et al.
MATERIALS (2019)
Model for Predicting Radial Temperature Distribution of Semi-Solid Slug Produced by Swirled Enthalpy Equilibration Device (SEED) Process
Min Luo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of Temperature Gradient on the Grain Size Homogeneity of SEED Produced Semi-Solid Slurries by Phase-Field Simulation
Wenying Qu et al.
MATERIALS (2019)
Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process
Yuhong Zhao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Current State of Semi-Solid Net-Shape Die Casting
Plato Kapranos
METALS (2019)
5G networks: Will technology and policy collide?
Zoraida Frias et al.
TELECOMMUNICATIONS POLICY (2018)
Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound
Bing Wang et al.
ACTA MATERIALIA (2018)
Microstructural evolution during temperature gradient zone melting: Cellular automaton simulation and experiment
Qingyu Zhang et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Microstructures, mechanical properties, and corrosion behavior of novel high-thermal-conductivity hypoeutectic Al-Si alloys prepared by rheological high pressure die-casting and high pressure die-casting
Mingfan Qi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Study on the response of dendritic growth to periodic increase-decrease pressure in solidification via in situ observation using succinonitrile
Shan Shang et al.
JOURNAL OF CRYSTAL GROWTH (2018)
Preparation of Al matrix nanocomposites by diluting the composite granules containing nano-SiCp under ultrasonic vibaration
Shulin Lu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Microstructure and mechanical properties of Mg97Zn1Y2 alloy reinforced with LPSO structure produced by semisolid squeeze casting
Shulin Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
In Situ Observation of the Zr Poisoning Effect in Al Alloys Inoculated by Al-Ti-B
Yiwang Jia et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Solidification behavior of 6061 wrought aluminum alloy during rheo-diecasting process with self-inoculation method
Ming Li et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Rheological Characterization of Semi-Solid Metals: A Review
Michael Modigell et al.
METALS (2018)
Microstructure and Properties of Semi-Solid Aluminum Alloys: A Literature Review
Annalisa Pola et al.
METALS (2018)
Current development of creep-resistant magnesium cast alloys: A review
Ning Mo et al.
MATERIALS & DESIGN (2018)
Thermomechanical Processing of Metal Feedstock for Semisolid Forming: A Review
Frank Czerwinski
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Microstructure and Thermal Stability of A357 Alloy With and Without the Addition of Zr
Yu-Chih Tzeng et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Critical assessment: opportunities in developing semi-solid processing: aluminium, magnesium, and high-temperature alloys
L. Rogal
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Microstructure and properties of rheo-HPDC Al-8Si alloy prepared by air-cooled stirring rod process
Ming-fan Qi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Heterogeneous nucleation and grain growth of inoculated aluminium alloys: An integrated study by in-situ X-radiography and numerical modelling
Yijiang Xu et al.
ACTA MATERIALIA (2017)
Rapid solidification growth mode transitions in Al-Si alloys by dynamic transmission electron microscopy
John D. Roehling et al.
ACTA MATERIALIA (2017)
A time-dependent power law viscosity model and its application in modelling semi-solid die casting of 319s alloy
X. G. Hu et al.
ACTA MATERIALIA (2017)
Blistering in semi-solid die casting of aluminium alloys and its avoidance
X. G. Hu et al.
ACTA MATERIALIA (2017)
4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification
B. Cai et al.
ACTA MATERIALIA (2016)
Influence of microstructure and heat treatment on thermal conductivity of rheocast and liquid die cast Al-6Si-2Cu-Zn alloy
M. Payandeh et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2016)
In situ study on interfacial reactions of Cu/Sn-9Zn/Cu solder joints under temperature gradient
N. Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
A forced convection stirring process for Rheo-HPDC aluminum and magnesium alloys
Mingfan Qi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Microstructure and properties of squeeze cast A356 alloy processed with a vibrating slope
R. G. Guan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Does Shear Thickening Occur in Semisolid Metals?
Helen V. Atkinson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry
Prosenjit Das et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Constructing a Ladder for Growth: Policy, Markets, and Industrial Upgrading in China
Loren Brandt et al.
WORLD DEVELOPMENT (2016)
Development and characterization of low-silicon cast aluminum alloys for thermal dissipation
Je-Sik Shin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
In situ small angle X-ray scattering investigation of ultrasound induced nucleation in a metallic alloy melt
Haijun Huang et al.
SCRIPTA MATERIALIA (2015)
Preparation of semi-solid A380 aluminum alloy slurry by serpentine channel
Zhi-yong Liu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Effects of pouring temperature and cylinder temperature on microstructures and mechanical properties of rheomoulding AZ91D alloy
Ming-fan Qi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Phase Field Simulation of Equiaxed Microstructure Formation during Semi-solid Processing of A380 Al Alloy
Prosenjit Das et al.
ISIJ INTERNATIONAL (2014)
Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis
Prosenjit Das et al.
MEASUREMENT (2014)
Cooling slope casting to produce EN AW 6082 forging stock for manufacture of suspension components
Yucel Birol et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Forced convection rheoforming process for preparation of 7075 aluminum alloy semisolid slurry and its numerical simulation
Bing Zhou et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
R-HPDC Process with Forced Convection Mixing Device for Automotive Part of A380 Aluminum Alloy
Bing Zhou et al.
MATERIALS (2014)
Characterization of flow behavior of semi-solid slurries containing low solid fractions in high-pressure die casting
S. Janudom et al.
ACTA MATERIALIA (2013)
Microstructures and thermal stability of the semi-solid 2024 aluminum alloy prepared using the pulsed magnetic field process: Effects of technological parameters
L. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effect of Mg and semi solid processing on microstructure and impression creep properties of A356 alloy
B. Amir Esgandari et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Creep of Rheocast 7075 Aluminum Alloy at 300 °C
Saravut Thongkam et al.
ADVANCED MATERIALS DESIGN AND MECHANICS II (2013)
Effect of Annular Electromagnetic Stirring on Microstructure and Mechanical Property of 7075 Aluminium Alloy
Zhihua Gao et al.
MATERIALS PERFORMANCE, MODELING AND SIMULATION (2013)
Casting and Heat Treatment of Turbocharger Impellers Thixocast from Alloy 201
Qiang Zhu et al.
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII (2013)
Effect of the parameters in inverted cone-shaped pouring channel process on the microstructure of semi-solid 7075 aluminum alloy slurry
B. Yang et al.
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII (2013)
Preparation and Rheo-Die casting of Semi-Solid A356 Aluminum Alloy Slurry through a Serpentine Pouring Channel
W. M. Mao et al.
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII (2013)
New Developments with the SEED Technology
Pascal Cote et al.
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII (2013)
Characterization of the microstructure evolution of a semi-solid metal slurry during the early stages
R. Canyook et al.
ACTA MATERIALIA (2012)
The indirect ultrasonic vibration process for rheo-squeeze casting of A356 aluminum alloy
Shulin Lu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Effects of pulsed magnetic field on microstructures and morphology of the primary phase in semisolid A356 Al slurry
L. Zhang et al.
MATERIALS LETTERS (2012)
Microstructure and property of rheocasting aluminum-alloy made with indirect ultrasonic vibration process
Shusen Wu et al.
MATERIALS LETTERS (2012)
Creep rupture behavior of semi-solid cast 7075-T6 Al alloy
N. Mahathaninwong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Refining microstructure of AZ91 magnesium alloy by introducing limited angular oscillation during initial stage of solidification
Hong-Min Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
T6 heat treatment of rheocasting 7075 Al alloy
N. Mahathaninwong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Precipitation hardening of A356 Al alloy produced by gas induced semi-solid process
S. Wisutmethangoon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Non-dendritic Structural Changes in Al-7Si Alloy Cast Through Rapid Slurry Formation (RSF) Process
A. Jain et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2012)
Preparation and rheocasting of semisolid slurry of 5083 Al alloy with indirect ultrasonic vibration process
Shulin Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Mechanical properties and microstructures of Al alloy tensile samples produced by serpentine channel pouring rheo-diecasting process
Chen Zheng-zhou et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Influence of serpentine channel pouring process parameters on semi-solid A356 aluminum alloy slurry
Chen Zheng-zhou et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Computational modelling of dendritic to globular transition using an isothermal binary phase-field model
P. Gerald Tennyson et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2011)
Direct observation of particle flow in semi-solid alloys by synchrotron X-ray micro-radioscopy
Simon Zabler et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2010)
Rheo-diecasting of AZ91D magnesium alloy by taper barrel rheomoulding process
Yang Liu-qing et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components
Q. Zhu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Microstructure and mechanical properties of rheo-diecasting AZ91D Mg alloy
Yang Liu-qing et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Microstructure and properties of high silicon aluminum alloy with 2% Fe prepared by rheo-casting
Zhong Gu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Microstructure of partially remelted billet of AM60 alloy prepared with self-inoculation method
Xing Bo et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy
R. Canyook et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Semi-solid rheocasting of grain refined aluminum alloy 7075
U. A. Curle et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Application of shortened heat treatment cycles on A356 automotive brake calipers with respective globular and dendritic microstructures
H. Moeller et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Effects of rheoforming on microstructures and mechanical properties of 7075 wrought aluminum alloy
Guo Hong-min et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Effect of Si, Cu and Fe on mechanical properties of cast semi-solid 206 alloys
A. Lemieux et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Wear of semi-solid rheocast SiCp/Al metal matrix composites
U. A. Curle et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Research and development of gas induced semi-solid process for industrial applications
J. Wannasin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Industrial development of gas induced semi-solid process
S. Thanabumrungkul et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Pressurized solidification of semi-solid aluminum die casting alloy A356
Hong-Min Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Annular electromagnetic stirring-a new method for the production of semi-solid A357 aluminum alloy slurry
Guanglei Zhu et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2009)
Determining effect of slurry process parameters on semisolid A356 alloy microstructures produced by RheoMetal process
O. Granath et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2008)
Cooling slope casting and thixoforming of hypereutectic A390 alloy
Yuecel Birol
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Formation of non-dendritic microstructure of semi-solid aluminum alloy under vibration
Shusen Wu et al.
SCRIPTA MATERIALIA (2008)
Thermal characteristics of heat-treated aluminum high-pressure die-castings
R. N. Lumley et al.
SCRIPTA MATERIALIA (2008)
Preparation of semi-solid slurry containing fine and globular particles for wrought aluminum alloy 2024
Guo Hong-min et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2007)
A probabilistic model of fatigue strength controlled by porosity population in a 319-type cast aluminum alloy: Part 1. model development
X. Zhu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Microstructural characterization of rheo-cast billets prepared by variant pouring temperatures
Omid Lashkari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Microstructure and rheological behavior of grain refined and modified semi-solid A356 Al-Si slurries
Shahrooz Nafisi et al.
ACTA MATERIALIA (2006)
Grain refinement of an aluminum alloy by introducing gas bubbles during solidification
J. Wannasin et al.
SCRIPTA MATERIALIA (2006)
The effect of injection velocity on liquid segregation and mechanical properties in arm part fabricated by semi-solid die casting process
C. G. Kang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Microstructure and mechanical properties of rheo-diecast AZ91D magnesium alloy
Z. Fan et al.
JOURNAL OF MATERIALS SCIENCE (2006)
The effect of chemical grain refinement and low superheat pouring on the structure of NRC castings of aluminium alloy Al-7Si-0.4Mg
MA Easton et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Modelling and simulation of forming processes of metallic suspensions under non-isothermal conditions
M Hufschmidt et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2006)
A new heat treatment procedure for rheo-diecast AZ91D magnesium alloy
Y Wang et al.
SCRIPTA MATERIALIA (2006)
Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment
Y Wang et al.
ACTA MATERIALIA (2006)
Modelling the semisolid processing of metallic alloys
HV Atkinson
PROGRESS IN MATERIALS SCIENCE (2005)
Evolution of globular microstructure in new rheocasting and super rheocasting semi-solid slurries
PJ Uggowitzer et al.
STEEL RESEARCH INTERNATIONAL (2004)
Two-phase simulations as a development tool for Thixoforming processes
M Modigell et al.
STEEL RESEARCH INTERNATIONAL (2004)
A model of growth morphology for semi-solid metals
SS Wu et al.
ACTA MATERIALIA (2004)
Semi-solid die casting process with three steps die system
PK Seo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Progress in structural materials for aerospace systems
JC Williams et al.
ACTA MATERIALIA (2003)
Finite element modeling of the deformation behavior of semi-solid materials
JH Yoon et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Correlating the microstructure and tensile properties of a thixomolded AZ91D magnesium alloy
F Czerwinski et al.
ACTA MATERIALIA (2001)