Related references
Note: Only part of the references are listed.Advances in coral aggregate concrete and its combination with FRP: A state-of-the-art review
Wen Zhou et al.
ADVANCES IN STRUCTURAL ENGINEERING (2021)
Effect of loading rate on mixed mode I-II crack propagation in concrete
Min-Hua Ma et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing
Grzegorz Ludwik Golewski et al.
MATERIALS (2021)
The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading
Grzegorz Ludwik Golewski
ENERGIES (2021)
Mechanical behavior and durability of coral aggregate concrete and bonding performance with fi ber-reinforced polymer (FRP) bars: A critical review
Linlin Zhou et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Feasibility of using geopolymers to investigate the bond behavior of FRP bars in seawater sea-sand concrete
Bai Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Experimental investigations on fracture parameters of random and aligned steel fiber reinforced cementitious composites
Iftikhar Ahmad et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Optimization of mix proportion of alkali-activated slag mortars prepared with seawater and coral sand
Bai Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length - Using the crack tip tracking (CTT) method - In the fracture toughness examinations under Mode II, through digital image correlation
Grzegorz Ludwik Golewski
CONSTRUCTION AND BUILDING MATERIALS (2021)
Compressive stress-strain behavior of seawater coral aggregate concrete incorporating eco-efficient alkali-activated slag materials
Bai Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method
Grzegorz Ludwik Golewski
MEASUREMENT (2021)
Strength and chloride ion distribution brought by aggregate of basalt fiber reinforced coral aggregate concrete
Yan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical properties and prediction of fracture parameters of geopolymer/alkali-activated mortar modified with PVA fiber and nano-SiO2
Peng Zhang et al.
CERAMICS INTERNATIONAL (2020)
Improvement of bond performance between concrete and CFRP bars with optimized additional aluminum ribs anchorage
Bai Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Study on flexural behavior of carbon fibers reinforced coral concrete using digital image correlation
Bing Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The Durability of Alkali-Activated Materials in Comparison with Ordinary Portland Cements and Concretes: A Review
Aiguo Wang et al.
ENGINEERING (2020)
Constitutive relations of coral aggregate concrete under uniaxial and triaxial compression
Wen Zhou et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Fabrication and engineering properties of concretes based on geopolymers/alkali-activated binders - A review
Peng Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Chloride-bearing characteristics of alkali-activated slag mixed with seawater: Effect of different salinity levels
Yubin Jun et al.
CEMENT & CONCRETE COMPOSITES (2020)
Mechanical and fracture properties of ultra-high performance geopolymer concrete: Effects of steel fiber and silica fume
Yiwei Liu et al.
CEMENT & CONCRETE COMPOSITES (2020)
Performance evaluation and microstructure characterization of seawater and coral/sea sand alkali-activated mortars
Bai Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Short term crack width prediction of CFRP bars reinforced coral concrete
Lei Wang et al.
ENGINEERING STRUCTURES (2020)
Properties of fresh and hardened fly ash/slag based geopolymer concrete: A review
Peng Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
The fracture behavior and microstructure of calcium aluminate cement concrete with various water-cement ratios
Amirmohamad Abolhasani et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Normal distribution analysis of fracture parameters of alkali-activated slag seawater column coral aggregate concrete
Wanmei Gui et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages
Grzegorz Ludwik Golewski
MATERIALS (2020)
Four-point bending tests for the fracture properties of concrete
Yangyang Yin et al.
ENGINEERING FRACTURE MECHANICS (2019)
Evaluation of alkali-activated mortars containing high volume waste ceramic powder and fly ash replacing GBFS
Ghasan Fahim Huseien et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effects of silica fume and blast furnace slag on the mechanical properties and chloride ion distribution of coral aggregate concrete
Yan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Preparation and application of alkali-activated materials based on waste glass and coal gangue: A review
Mohamad Jamali Moghadam et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Study on fracture properties of alkali-activated slag seawater coral aggregate concrete
Weiying Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Chloride binding of alkali-activated slag/fly ash cements
Jian Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Evaluation of bond performance of corroded steel bars in concrete after high temperature exposure
Bai Zhang et al.
ENGINEERING STRUCTURES (2019)
An analytical approach to predict fracture parameters of coral aggregate concrete immersed in seawater
Shutong Yang et al.
OCEAN ENGINEERING (2019)
Mechanical properties of alkali-activated slag concrete mixed by seawater and sea sand
Shutong Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete
Ning Li et al.
CEMENT & CONCRETE COMPOSITES (2018)
Thermal and mechanical properties of alkali-activated slag paste, mortar and concrete utilising seawater and sea sand
Ying-Lei Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Fracture properties of alkali-activated slag and ordinary Portland cement concrete and mortar
Yao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Durability of fiber reinforced polymer (FRP) in simulated seawater sea sand concrete (SWSSC) environment
F. Guo et al.
CORROSION SCIENCE (2018)
Structural and material performance of geopolymer concrete: A review
Chau-Khun Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature
Yao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Comparison of boundary and size effect models based on new developments
Xiaozhi Hu et al.
ENGINEERING FRACTURE MECHANICS (2017)
Effects of fly ash, blast furnace slag and metakaolin on mechanical properties and durability of coral sand concrete
Shukai Cheng et al.
APPLIED CLAY SCIENCE (2017)
Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars
Mathieu Robert et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
A comprehensive overview about the influence of different additives on the properties of alkali-activated slag - A guide for Civil Engineer
Alaa M. Rashad
CONSTRUCTION AND BUILDING MATERIALS (2013)
Fracture behaviour of heat cured fly ash based geopolymer concrete
Prabir K. Sarker et al.
MATERIALS & DESIGN (2013)
Determination of fracture parameters for crack propagation in concrete using an energy approach
Shilang Xu et al.
ENGINEERING FRACTURE MECHANICS (2008)