4.7 Article

Evaluation of fracture resistance of asphalt concrete involving Calcium Lignosulfonate and Polyester fiber under freeze-thaw damage

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Investigation of lignin as an alternative extender of bitumen for asphalt pavements

Jiantao Wu et al.

Summary: The study investigated the feasibility of using lignin as an extender for bitumen, finding that lignin significantly affected the stiffness and temperature susceptibility of bitumen. The addition of lignin increased mixing and paving temperatures and improved anti-aging capacity. The issue of lignin segregation was addressed with additives, suggesting lignin could be a good extender for bitumen with the appropriate procedure.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Improving moisture and fracture resistance of warm mix asphalt containing RAP and nanoclay additive

Mansour Fakhri et al.

Summary: This study evaluates the performance of warm mix asphalt (WMA) mixtures incorporating reclaimed asphalt pavement (RAP) and nano clay in terms of fracture and moisture resistance, showing positive impacts on both aspects. The fracture resistance of samples increases with decreasing temperatures, and WMA mixtures are more susceptible to crack at mixed-mode conditions. The simultaneous use of WMA, RAP, and nano clay presents an environmentally-friendly mixture with improved efficiency compared to conventional WMA.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Mechanical

Evaluation of low and intermediate temperatures fracture indices for modified Warm mix asphalt (WMA) using edge notched disc bend (ENDB) specimen

Mohammad Zarei et al.

Summary: This study evaluated different fracture indices on Warm Mix Asphalt (WMA) using ENDB geometry at low and intermediate temperatures, considering the influence of environmentally friendly additives. The results showed that the WMA mixture containing 0.25% PE-6% CL exhibited higher fracture toughness and fracture energy in both pure modes I and III at different temperatures.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Article Engineering, Mechanical

Pure mode I and pure mode II fracture resistance of modified hot mix asphalt at low and intermediate temperatures

Mohammad Zarei et al.

Summary: This study investigated the fracture behavior of hot mix asphalt (HMA) containing angular cracks using the extended finite element method (XFEM). The use of environmentally and economically justifiable additives and fibers improved HMA performance, with samples showing increased fracture energy, fracture toughness, and reduced brittleness. The presence of coarse aggregate in the ligament section of the samples was found to be an important factor in enhancing fracture properties.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Article Engineering, Mechanical

Evaluation of fracture behavior of modified Warm Mix Asphalt (WMA) under modes I and II at low and intermediate temperatures

Mohammad Zarei et al.

Summary: This study investigated the fracture behavior of Warm Mix Asphalt (WMA) mixtures using Pure mode I and Pure mode II cracking states under different temperatures. The results indicated that the 0.25PE-6CL, 0.25PE, and 6CL mixtures showed the best performance in terms of fracture mechanics.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Article Construction & Building Technology

High-temperature rheological behavior and fatigue performance of lignin modified asphalt binder

Junfeng Gao et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Low-temperature crack resistance of coal gangue powder and polyester fibre asphalt mixture

Rong-bao Hong et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Fracture strength of warm mix asphalt concretes modified with crumb rubber subjected to variable temperatures

Sadjad Pirmohammad et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2020)

Article Engineering, Civil

Technical, Economic, and Environmental Investigation of the Effects of Rubber Powder Additive on Asphalt Mixtures

Mohammad Zarei et al.

JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS (2020)

Article Construction & Building Technology

Fracture properties of asphalt mixtures containing electric arc furnace slag at low and intermediate temperatures

S. M. Motevalizadeh et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Chemistry, Multidisciplinary

Mechanical Performance Characterization of Lignin-Modified Asphalt Mixture

Yi Zhang et al.

APPLIED SCIENCES-BASEL (2020)

Article Construction & Building Technology

Evaluation of the effect of moisture on behavior of warm mix asphalt (WMA) mixtures containing recycled asphalt pavement (RAP)

Hadi Goli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effect of moisture and freeze-thaw damage on microwave healing of asphalt mixes

Amir Kavussi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Impact of freeze-thaw cycles on low temperature mixed mode I/II cracking properties of water saturated hot mix asphalt: An experimental study

Mansour Fakhri et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Multidisciplinary Sciences

Experimental determination of the optimum percentage of asphalt mixtures reinforced with Lignin

Mohsen Zahedi et al.

SN APPLIED SCIENCES (2020)

Correction Engineering, Civil

Technical, Economic, and Environmental Investigation of the Effects of Rubber Powder Additive on Asphalt Mixtures (vol 146, 10.1061/JPEODX.0000142, 2019)

Mohammad Zarei et al.

JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS (2020)

Article Construction & Building Technology

Effects of deicing agents on moisture susceptibility of the WMA containing recycled crumb rubber

Mansour Fakhri et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Multidisciplinary Sciences

Evaluation of the Effect of Lignin and Glass Fiber on the Technical Properties of Asphalt Mixtures

Ali Zarei et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)

Article Construction & Building Technology

Effect of specimen thickness on the fracture resistance of hot mix asphalt in the disk-shaped compact tension (DCT) configuration

Calvin M. Stewart et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test

Fawaz Kaseer et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Agricultural Engineering

High-temperature, low-temperature and weathering aging performance of lignin modified asphalt binders

K. B. Batista et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

Article Metallurgy & Metallurgical Engineering

Some physical and chemical characteristics of calcium lignosulphonate-bound coal fines

C. A. Strydom et al.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2018)

Article Construction & Building Technology

Comprehensive evaluation of low-temperature fracture indices for asphalt mixtures

Yuefeng Zhu et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

Article Construction & Building Technology

Evaluation of fracture resistance of asphalt mixes involving steel slag and RAP: Susceptibility to aging level and freeze and thaw cycles

Mansour Fakhri et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Study on affecting factors of interface crack for asphalt mixture based on microstructure

Lan Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Investigation of different test methods to quantify rutting resistance and moisture damage of GFM-WMA mixtures

Mansour Fakhri et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Rheological properties and anti-aging performance of asphalt binder modified with wood lignin

Guangji Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Crack and crack growth behavior analysis of asphalt mixtures based on the digital speckle correlation method

Li Chao et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Effect of temperature variations on fracture resistance of HMA mixtures under different loading modes

S. Pirmohammad et al.

MATERIALS AND STRUCTURES (2016)

Article Materials Science, Characterization & Testing

Impact of temperature cycling on fracture resistance of asphalt concretes

Sadjad Pirmohammad et al.

Computers and Concrete (2016)

Article Construction & Building Technology

Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers

Haopeng Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Engineering, Mechanical

Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes

M. Ameri et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)

Article Construction & Building Technology

Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures

M. R. M. Aliha et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Mechanics

Numerical analysis of a new mixed mode I/III fracture test specimen

M. R. M. Aliha et al.

ENGINEERING FRACTURE MECHANICS (2015)

Article Biochemistry & Molecular Biology

Structural characterization of lignin: A potential source of antioxidants guaiacol and 4-vinylguaiacol

Mohammadali Azadfar et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)

Article Materials Science, Multidisciplinary

Impact of Freeze-Thaw Cycles on Compressive Characteristics of Asphalt Mixture in Cold Regions

Si Wei et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2015)

Article Construction & Building Technology

A simplified performance-based specification for asphalt pavements

Minkyum Kim et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2015)

Article Construction & Building Technology

Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam

Guowei Zeng et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures

M. R. M. Aliha et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Analysis of the mechanical behaviour of bituminous mixtures at low temperatures

Felix Perez-Jimenez et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

A first-principles based chemophysical environment for studying lignins as an asphalt antioxidant

Tongyan Pan

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Mechanics

Mixed mode fracture resistance of asphalt concrete mixtures

M. Ameni et al.

ENGINEERING FRACTURE MECHANICS (2012)

Article Construction & Building Technology

Laboratory Mixed-Mode Cracking of Asphalt Concrete Using the Single-Edge Notch Beam

Andrew Braham et al.

Road Materials and Pavement Design (2012)

Article Construction & Building Technology

Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture

Shu Wei Goh et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Mechanics

An improved semi-circular bend specimen for investigating mixed mode brittle fracture

M. R. Ayatollahi et al.

ENGINEERING FRACTURE MECHANICS (2011)

Article Mechanics

Cracked asphalt pavement under traffic loading - A 3D finite element analysis

M. Ameri et al.

ENGINEERING FRACTURE MECHANICS (2011)

Article Engineering, Civil

Low-Temperature Fracture Characteristics of Selected Warm-Mix Asphalt Concretes

Min-Yong Yoo et al.

TRANSPORTATION RESEARCH RECORD (2011)

Article Engineering, Environmental

Impact of salt and freeze-thaw cycles on performance of asphalt mixtures in coastal frozen region of China

Decheng Feng et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2010)

Review Construction & Building Technology

Fiber-reinforced asphalt-concrete - A review

Sayyed Mandi Abtahi et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Materials Science, Multidisciplinary

Evaluation and design of fiber-reinforced asphalt mixtures

Huaxin Chen et al.

MATERIALS & DESIGN (2009)

Article Construction & Building Technology

The effect of asphalt mixture gradation and compaction energy on aggregate degradation

G. D. Airey et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Article Construction & Building Technology

Properties of gap-aggregate gradation asphalt mixture and permanent deformation

DH Shen et al.

CONSTRUCTION AND BUILDING MATERIALS (2005)

Article Agricultural Engineering

Characterisation of structure-dependent functional properties of lignin with infrared spectroscopy

CG Boeriu et al.

INDUSTRIAL CROPS AND PRODUCTS (2004)

Article Agricultural Engineering

Characterization of the radical scavenging activity of lignins - natural antioxidants

T Dizhbite et al.

BIORESOURCE TECHNOLOGY (2004)