☆ 4.7 Article

Fundamental understanding on the microstructure and corrosion resistance of Cr-(Cr, Al)(2)O-3 composite coatings in-situ synthetized by reactive plasma spraying

SURFACE & COATINGS TECHNOLOGY (2021)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

TiC-TiSi2-Al2O3 composite coatings prepared by spray drying, heat treatment and plasma spraying

Yu-duo Ma et al.

Summary: An innovative approach to improve the quality of TiC-TiSi2-Al2O3 composite coating was demonstrated in this study. The results showed that the coating obtained by plasma spraying heat-treated Al-TiO2-SiC composite powders had the highest bonding strength, microhardness, and fracture toughness among the three coatings, indicating the effectiveness of the heat treatment process in enhancing the properties of the coatings.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Optics

A novel Ni2MnCuSnAl0.1 multi-principal element alloy coating to enhance the wear resistance and corrosion resistance of Mg-Li alloy

Xin Wen et al.

Summary: A novel Ni2MnCuSnAl0.1 multi-principal element alloy coating and a multi-step ultrasonic assisted laser cladding technique were proposed to overcome the deficiencies of evaporation and dilution of substrate in laser-cladded coatings on Mg-Li alloys. The synthesized Ni2MnCuSnAl0.1 MPEA coatings on Mg-Li alloy exhibited improved corrosion resistance, hardness, and wear resistance compared to the Mg-Li alloy.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Construction & Building Technology

Optimizing the resistance of Ni-advanced weathering steel to marine atmospheric corrosion with the addition of Al or Mo

Xuexu Xu et al.

Summary: The self-designed Ni-advanced weathering steels alloyed with Al and Mo were found to have improved corrosion resistance, especially when Mo is added compared to Al. The addition of Mo can lead to the formation of a thicker protective rust layer, which effectively resists Cl intrusion due to the presence of MoO2 and MoO3 that prevent the degradation of NiFe2O4. On the other hand, the Al-enriched particles are unable to block Cl intrusion but can help in filling the pores and cracks in the rust layer, making it more compact and increasing its resistance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synergy of Cu and Sb to enhance the resistance of 3%Ni weathering steel to marine atmospheric corrosion

Wei Wu et al.

Summary: The incorporation of 0.5% Cu and 0.2% Sb into 3% Ni steel showed a synergistic effect in enhancing corrosion resistance by optimizing the properties of the corrosion product film. This synergy resulted in a thicker inner layer enriched with Cu, Sb, and Ni, significantly improving the compactness, phase composition, elemental distribution, and electrochemical activity of the CPF.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Coatings & Films

Microstructure and properties of Cr7C3-CrSi2 composite coatings prepared by plasma spraying

Yu-duo Ma et al.

Summary: The in-situ Cr7C3-CrSi2 composite coating was fabricated from Cr-SiC composite powders using the plasma spraying process. The mechanical properties and formation mechanism were investigated, showing that using Cr-SiC composite powders resulted in a coating with higher density and more homogeneous microstructure distribution compared to using Cr7C3-CrSi2 composite powders. The excellent performance of the coating obtained by the Cr-SiC system was mainly attributed to its finer, denser, and more uniform microstructure.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Influence of grain refinement on the corrosion behavior of metallic materials: A review

Pan-jun Wang et al.

Summary: Grain refinement can enhance mechanical properties but may not always improve corrosion resistance; there is still no consensus on how grain size affects corrosion behavior; microstructural changes resulting from grain refinement have a significant impact on corrosion behavior.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Distinct beneficial effect of Sn on the corrosion resistance of Cr-Mo low alloy steel

Meihui Sun et al.

Summary: This study demonstrates that the addition of Sn improves the corrosion resistance of Cr-Mo low alloy steel mainly by influencing microstructural transformation, leading to enhanced protection and stability of the rust layer. The synergistic effect of Sn, Cr, and Mo also provides ion selectivity to the inner rust layer, preventing Cl- penetration and inhibiting localized corrosion of the steel.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution

Pavan Bijalwan et al.

Summary: The Fe-based composite coatings deposited by atmospheric plasma spraying showed better corrosion resistance compared to the steel substrate, regardless of the coating thickness. The coating with a thickness of 110 +/- 12 μm exhibited the best corrosion resistance, attributed to optimal content of amorphous, porosity, and surface roughness.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

Add to Collection

Article Materials Science, Coatings & Films

A study on corrosion behavior of micro-arc oxidation coatings doped with 2-aminobenzimidazole loaded halloysite nanotubes on AZ31 magnesium alloys

W. X. Wu et al.

Summary: Incorporating 2-aminobenzimidazole (2-ABi) loaded halloysite nanotubes (HNTs) into MAO coatings can provide actively protective functionality, enhancing the corrosion resistance of Mg alloys with a self-healing effect.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Coatings & Films

Investigation of nano- and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe-Cr-B-C-P) amorphous coatings

Anil Kumar et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

In-situ TiC-Ti5Si3-SiC composite coatings prepared by plasma spraying

Yu-duo Ma et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The role of chromium content in the long-term atmospheric corrosion process

Baozhuang Sun et al.

NPJ MATERIALS DEGRADATION (2020)

Add to Collection

Article Chemistry, Physical

Effect of grinding and lubricating post-treatment on wear performance of plasma sprayed Cr2O3-Al2O3 composite coatings

Pejman Zamani et al.

SURFACES AND INTERFACES (2019)

Add to Collection

Article Materials Science, Ceramics

Influence of microstructure on the wear and corrosion behavior of detonation sprayed Cr2O3-Al2O3 and plasma sprayed Cr2O3 coatings

P. Suresh Babu et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

Microstructure and properties of in-situ ceramic matrix eutectic nanocomposite coating prepared by plasma spraying Al-Cr2O3-Al2O3 powder

Dian-ran Yan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Coatings & Films

Microstructure, phase composition and mechanical properties of plasma sprayed Al2O3,Cr2O3 and Cr2O3-Al2O3 composite coatings

P. Zamani et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Coatings & Films

Effect of nano-sized TiC powder on microstructure and the corrosion resistance of WC-Co thermal spray coatings

H. Myalska et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Ceramics

In situ (Al,Cr)2O3-Cr composite coating fabricated by reactive plasma spraying

Xuerui Dai et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Materials Science, Ceramics

Comparative study on wear behavior of plasma sprayed Al2O3 coatings sliding against different counterparts

Wen Deng et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Materials Science, Ceramics

Microstructural, mechanical properties and corrosion behavior of plasma sprayed NiCrAlY/nano-YSZ duplex coating on Mg-1.2Ca-3Zn alloy

H. R. Bakhsheshi-Rad et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Coatings & Films

Effects of inorganic sealant and brief heat treatments on corrosion behavior of plasma sprayed Cr2O3-Al2O3 composite ceramic coatings

Fang Shao et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Add to Collection

Article Engineering, Mechanical

Sliding wear behavior of in-situ FeAl2O4 matrix nanocomposite coating fabricated by plasma spraying

Yong Yang et al.

TRIBOLOGY INTERNATIONAL (2015)

Add to Collection

Article Chemistry, Physical

Effect of current mode on PEO treatment of magnesium in Ca- and P-containing electrolyte and resulting coatings

Yonghao Gao et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Materials Science, Ceramics

Structure and properties of nanostructured ceramic matrix composite coatings prepared in-situ by reactive plasma spraying micro-sized Al-Fe2O3-Cr2O3 powders

Lei Wang et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Materials Science, Ceramics

Nanostructured ceramic composite coating prepared by reactive plasma spraying micro-sized Al-Fe2O3 composite powders

Lei Wang et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Chemistry, Physical

Combustion synthesis of Cr-Al and Cr-Si intermetallics with Al2O3 additions from Cr2O3-Al and Cr2O3-Al-Si reaction systems

C. L. Yeh et al.

INTERMETALLICS (2013)

Add to Collection

Article Materials Science, Coatings & Films

Microstructural Characterization and Strengthening-Toughening Mechanism of Plasma-Sprayed Al2O3-Cr2O3 Composite Coatings

Kai Yang et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)

Add to Collection

Review Materials Science, Coatings & Films

Microstructure Characterization of the FeAl2O4-Based Nanostructured Composite Coating Synthesized by Plasma Spraying Fe2O3/Al Powders

Dianran Yan et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2011)

Add to Collection

Article Materials Science, Coatings & Films

Microwave absorption properties and complex permittivity of Fe/FeAl2O4 coatings deposited by reactive plasma spraying Al/Fe2O3 powders

Dong Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2011)

Add to Collection

Article Materials Science, Coatings & Films

Microstructure and mechanical properties of Al2O3-Cr2O3 composite coatings produced by atmospheric plasma spraying

Kai Yang et al.

SURFACE & COATINGS TECHNOLOGY (2011)

Add to Collection

Article Materials Science, Coatings & Films

Microstructure and tribological behavior of suspension plasma sprayed Al2O3 and Al2O3-YSZ composite coatings

O. Tingaud et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Materials Science, Coatings & Films

Structure, morphology and chemical composition of sputter deposited nanostructured Cr-WS2 solid lubricant coatings

B. Deepthi et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Chemistry, Physical

Reactive plasma cladding of TiC/Fe cermet coating using asphalt as a carbonaceous precursor

Junbo Liu et al.

APPLIED SURFACE SCIENCE (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, spallation and corrosion of plasma sprayed Al2O3-13%TiO2 coatings

You Wang et al.

CORROSION SCIENCE (2009)

Add to Collection

Article Materials Science, Coatings & Films

Corrosion and tribological behaviors of chromium oxide coatings prepared by the glow-discharge plasma technique

Hongbing Liu et al.

SURFACE & COATINGS TECHNOLOGY (2009)

Add to Collection

Article Engineering, Industrial

Tribological behavior of Cr2O3 coatings as bearing materials

Hakan Cetinel et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Coatings & Films

Structure and mechanical properties of plasma sprayed nanostructured alumina and FeCuAl-alumina cermet coatings

A. K. Basak et al.

SURFACE & COATINGS TECHNOLOGY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.