4.7 Article

Exploring the efficiency limiting parameters trade-off at rear surface in passivated emitter rear contact (PERC) silicon solar cells

Related references

Note: Only part of the references are listed.
Article Physics, Applied

Pathway towards 24% efficiency for fully screen-printed passivated emitter and rear contact solar cells

Yuchao Zhang et al.

Summary: This study investigated the efficiency potential of fully screen-printed PERC solar cells through numerical simulations, revealing significant limitations from carrier recombination losses at the metal/silicon interface. Recommendations for improvements were made to overcome these limitations and achieve higher efficiencies.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Article Engineering, Electrical & Electronic

Influence of surface structure on the performance of mono-like Si PERC solar cell

Rui Tong et al.

Summary: The study shows that alkaline texturing results in better surface doping concentration, junction depth, and passivation effect compared to MACE texturing. Combining MACE and alkaline texturing processes generates structures that lead to higher conversion efficiency in solar cells.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2021)

Article Energy & Fuels

Impact of Local Back-Surface-Field Thickness Variation on Performance of PERC Solar Cells

Byungsul Min et al.

Summary: This study investigates the impact of local aluminum contact's back-surface-field (BSF) thickness variation on the performance of passivated emitter and rear contact solar cells. Experimental and simulation analysis show that adjusting BSF thickness, doping concentration, and contact area fraction can reduce efficiency loss caused by locally reduced BSF thicknesses, particularly affecting the open-circuit voltage.

IEEE JOURNAL OF PHOTOVOLTAICS (2021)

Article Energy & Fuels

Improved Al2O3/SiNx and SiO2/SiNx stack passivation layer structure PERC sc-silicon solar cells on mass production line

Hao Liu et al.

Summary: A new industrially feasible fabrication method for stack passivation layers PERC solar cells was successfully developed based on existing production line, optimizing manufacturing parameters to achieve the best passivation effect, and introducing a new thin low refractive index SiNx capping layer for improved performance. The efficiency of the industrial stack passivation layers PERCs with the new thin low refractive index SiNx capping layer reached 22.15%.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Energy & Fuels

High-precision alignment procedures for patterning processes in solar cell production

Elmar Lohmueller et al.

PROGRESS IN PHOTOVOLTAICS (2020)

Article Energy & Fuels

Optimization of rear surface roughness and metal grid design in industrial bifacial PERC solar cells

H. B. Tang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Article Energy & Fuels

Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts

Pradeep Padhamnath et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Energy & Fuels

Application of SiO2 passivation technique in mass production of silicon solar cells

Y. F. Zhuang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Energy & Fuels

Development of the PERC Solar Cell

Andrew Blakers

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

Article Energy & Fuels

Large-area MACE Si nano-inverted-pyramids for PERC solar cell application

Z. G. Huang et al.

SOLAR ENERGY (2019)

Article Energy & Fuels

SiO2 surface passivation layers a key technology for silicon solar cells

Stefan W. Glunz et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Article Materials Science, Multidisciplinary

Dielectric surface passivation for silicon solar cells: A review

Ruy S. Bonilla et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2017)

Article Energy & Fuels

Light Trapping in Isotextured Silicon Wafers

Keith R. McIntosh et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2017)

Article Physics, Applied

Investigation of different contact geometries for partial rear metal contact of high-efficiency silicon solar cells

Suchismita Mitra et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2015)

Article Energy & Fuels

The Passivated Emitter and Rear Cell (PERC): From conception to mass production

Martin A. Green

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

Proceedings Paper Energy & Fuels

Impact of rear side roughness on optical and electrical properties of a high-efficiency solar cell

Maxi Richter et al.

5TH INTERNATIONAL CONFERENCE ON SILICON PHOTOVOLTAICS, SILICONPV 2015 (2015)

Article Energy & Fuels

Recombination and Optical Properties of Wet Chemically Polished Thermal Oxide Passivated Si Surfaces

Christoph Schwab et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2013)

Article Energy & Fuels

A Fill Factor Loss Analysis Method for Silicon Wafer Solar Cells

Ankit Khanna et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2013)

Proceedings Paper Energy & Fuels

Wet chemical polishing for industrial type PERC solar cells

Christopher Kranz et al.

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS (SILICONPV 2013) (2013)

Article Engineering, Electrical & Electronic

Efficient Boron Doping in the Back Surface Field of Crystalline Silicon Solar Cells via Alloyed-Aluminum-Boron Paste

Guoping Du et al.

IEEE ELECTRON DEVICE LETTERS (2012)

Article Energy & Fuels

Nondestructive local analysis of current-voltage characteristics of solar cells by lock-in thermography

Otwin Breitenstein

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Article Physics, Applied

Recombination at textured silicon surfaces passivated with silicon dioxide

Keith R. McIntosh et al.

JOURNAL OF APPLIED PHYSICS (2009)

Article Physics, Applied

Stability of Al2O3 and Al2O3/a-SiNx:H stacks for surface passivation of crystalline silicon

G. Dingemans et al.

JOURNAL OF APPLIED PHYSICS (2009)

Article Physics, Applied

On the c-Si surface passivation mechanism by the negative-charge-dielectric Al2O3

B. Hoex et al.

JOURNAL OF APPLIED PHYSICS (2008)

Article Energy & Fuels

Analytical model for the diode saturation current of point-contacted solar cells

H Plagwitz et al.

PROGRESS IN PHOTOVOLTAICS (2006)