4.6 Article

Improving the performance of tubular solar still integrated with drilled carbonized wood and carbon black thin film evaporation

Related references

Note: Only part of the references are listed.
Review Thermodynamics

Reverse osmosis desalination systems powered by solar energy: Preheating techniques and brine disposal challenges - A detailed review

S. M. Shalaby et al.

Summary: Reverse osmosis desalination systems are widely used globally due to their low production cost, but they face challenges such as high energy consumption and membrane fouling. Research focuses on reducing energy consumption, improving thermal efficiency, and exploring brine disposal methods.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Thermodynamics

Humidification dehumidification saline water desalination system utilizing high frequency ultrasonic humidifier and solar heated air stream

Gamal B. Abdelaziz et al.

Summary: The experimental study showed that increasing the number of atomizers, reducing water height, and selecting the optimal hot air stream flow rate can enhance the distillate yield and efficiency of the solar desalination system.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2022)

Article Thermodynamics

Prediction of tubular solar still performance by machine learning integrated with Bayesian optimization algorithm

Yunpeng Wang et al.

Summary: This study developed accurate and convenient prediction models of tubular solar still performance using machine learning, with random forest showing superior performance in predicting hourly production. Bayesian optimization significantly improved the performance of artificial neural network, and optimization findings revealed that random forest was less sensitive to hyper parameters than artificial neural network.

APPLIED THERMAL ENGINEERING (2021)

Article Engineering, Environmental

An assessment of energy, exergy and CO2 emissions of a solar desalination system under hot climate conditions

Hamdy Hassan et al.

Summary: This study assesses the performance of a single slope solar still combined with enhanced condenser and integrated with parabolic trough solar collector based on various methodologies. The system with sand and parabolic trough integration showed the highest freshwater productivity in experiments. Incorporating the parabolic trough improved energy and exergy output, showcasing promising results compared to systems without it.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Chemistry, Physical

Investigation of a novel (GO@CuO.γ-Al2O3) hybrid nanocomposite for solar energy applications

Nagi M. El-Shafai et al.

Summary: A novel hybrid nanomaterial (HNM) was manufactured by loading Graphene oxide nanosheet (GO) with other quantum dots (QDs) to form GO@CuO.gamma-Al2O3, showing great potential in thermal and electrical performances.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

A novel reduced graphene oxide based absorber for augmenting the water yield and thermal performance of solar desalination unit

Amrit Kumar Thakur et al.

Summary: The study found that using 12 wt% RGO doped with black paint-coated absorber significantly increased the water yield and absorber temperature of a single basin solar still. Compared to only using black paint-coated absorber, the SS with RGO coating had higher water yield. The application of RGO improved the performance of the SS.

MATERIALS LETTERS (2021)

Article Engineering, Chemical

Sea-water desalination using a desalting unit integrated with a parabolic trough collector and activated carbon pellets as energy storage medium

Amrit Kumar Thakur et al.

Summary: Solar energy is considered the most influential source for sustainable applications, showcasing its ability to convert brackish water into freshwater. This study presents a novel method of integrating a parabolic trough collector and activated carbon pellet to enhance water productivity in desalination units using sea-water as feed water.

DESALINATION (2021)

Article Engineering, Environmental

Experimental study of activated carbon as a porous absorber in solar desalination with environmental, exergy, and economic analysis

Gamal B. Abdelaziz et al.

Summary: In this study, the performance of a solar still (SS) using a porous absorber made from activated carbon tubes (RACT) was experimentally evaluated in comparison to a conventional SS without porous material (SS-C). The results showed that the SS with horizontal staggered half capacity (SS-HSC) achieved high performance in various aspects, with significant advantages in energy efficiency, cost reduction, and CO2 emissions reduction.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Thermodynamics

A compact flat solar still with high performance

Guilong Peng et al.

Summary: The solar still is a convenient off-grid device for desalination, with the flat solar still (FSS) being proposed as an alternative to improve efficiency and productivity. The FSS collects condensate water using capillary grid and shows enhanced mass transfer, leading to higher performance and energy efficiency. The FSS can also be easily extended to more stages for latent heat recovery, paving a new way in designing and optimizing solar stills.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Engineering, Chemical

Performance improvement of double slope solar still via combinations of low cost materials integrated with glass cooling

Khaled Elmaadawy et al.

Summary: The study focused on enhancing the performance of solar stills by using different material combinations, with significant improvements in evaporation and condensation efficiency. The best results were achieved by the modified double slope solar still (MDSSS) with dispersed carbon black nanoparticles on top, showing improved yield, energy efficiency, exergy efficiency, and cost savings compared to conventional solar stills.

DESALINATION (2021)

Article Energy & Fuels

Augmented performance of tubular solar still integrated with cost-effective nano-based mushrooms

Swellam W. Sharshir et al.

Summary: The study aimed to increase freshwater production and enhance the performance of tubular solar stills by using pure and carbon black-coated mushrooms. Results showed that using nanocoated mushrooms led to a significant improvement in both productivity and energy efficiency.

SOLAR ENERGY (2021)

Article Engineering, Chemical

Feasibility analysis and optimization of an energy-water-heat nexus supplied by an autonomous hybrid renewable power generation system: An empirical study on airport facilities

M. R. Elkadeem et al.

Summary: The study shows that the optimal energy system for the New Capital International Airport in Egypt significantly reduces net present and energy costs while producing emissions 59.5% lower than the base-case. The thermal load controller plays a crucial role in reducing costs and emissions.

DESALINATION (2021)

Article Thermodynamics

A fuzzy decision-making model for optimal design of solar, wind, diesel-based RO desalination integrating flow-battery and pumped-hydro storage: Case study in Baltim, Egypt

Kotb M. Kotb et al.

Summary: This study proposes a conceptual design model for a sustainable hybrid renewable stand-alone energy system (HRSES) to meet the electricity demand of a desalination plant in Baltim, Egypt. Using a fuzzy-based multicriteria decision-making model and HOMER software, the optimal energy solution is selected among different alternatives based on economic, ecological, and performance criteria.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Green & Sustainable Science & Technology

Improving thermal, economic, and environmental performance of solar still using floating coal, cotton fabric, and carbon black nanoparticles

Swellam W. Sharshir et al.

Summary: This study presents enhanced thermal, economic, and environmental performances of a modified single slope solar still using eco-friendly materials such as floating coal, cotton fabrics, and carbon black nanoparticles. The results show that the modified solar still-C, with carbon black nanoparticles dispersed atop the coal/cotton combination, achieved the highest improvements in terms of accumulated yield, average energy efficiency, and average exergy efficiency. Additionally, it also showed cost savings and increased carbon emission mitigation compared to a traditional reference solar still.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2021)

Article Engineering, Environmental

Improving the performance of pyramid solar still using rotating four cylinders and three electric heaters

Wissam H. Alawee et al.

Summary: The modification of the pyramid solar still by incorporating rotating cylinders and electric heaters has significantly improved the distillation efficiency and productivity, resulting in a substantial increase in the production of drinkable water. The optimal increase in productivity was achieved at a cylinder speed of 0.5 rpm, with the use of heaters enhancing thermal efficiency.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Engineering, Environmental

Utilization of LSTM neural network for water production forecasting of a stepped solar still with a corrugated absorber plate

Ammar H. Elsheikh et al.

Summary: This study introduced a LSTM neural network model to forecast the freshwater yield of a stepped solar still and a conventional one, resulting in an improved yield by 128% for the stepped solar still compared to the conventional one. The forecasting accuracy of the proposed model was high, with a coefficient of determination of 0.97 and 0.99 for the conventional and the stepped solar still, respectively.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Thermodynamics

Performance assessment of solar PV-driven hybrid HDH-RO desalination system integrated with energy recovery units and solar collectors: Theoretical approach

Mohamed Abdelgaied et al.

Summary: This study successfully simulated a new hybrid desalination unit merging humidification-dehumidification and reverse osmosis techniques, utilizing photovoltaic systems for power and thermal energy recovery units to enhance freshwater production and energy efficiency.

ENERGY CONVERSION AND MANAGEMENT (2021)

Review Green & Sustainable Science & Technology

Potential and challenges of improving solar still by micro/nano-particles and porous materials-A review

Guilong Peng et al.

Summary: Utilizing micro/nano-materials to optimize solar evaporation process can enhance productivity and efficiency of solar still, with key factors including particles concentration, materials type, systems configurations, solar intensity, and so on.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Energy, exergy, environmental benefits and economic aspects of novel hybrid solar still for sustainable water distillation

H. Sharon

Summary: A novel hybrid solar still with optimized performance parameters was studied, showing better performance in winter seasons. The energy payback time of the optimized solar still is within 1.2 years, while the financial payback time is within 4.0 years. The unit shows significant reductions in CO2 and SO2 emissions.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Energy & Fuels

Improved thermo-economic performance of solar desalination via copper chips, nanofluid, and nano-based phase change material

A. W. Kandeal et al.

Summary: The study evaluated the performance difference between a modified double slope still and a conventional single slope still, with optimizations made by adding different substances. The results showed that adding copper chips and nano-enhanced materials can improve thermal conductivity and overall performance.

SOLAR ENERGY (2021)

Article Green & Sustainable Science & Technology

Hybrid solar still as a co-generative system and desalination system - An experimental performance evaluation

Dhruvin Shukla et al.

Summary: The experimental evaluation of a double basin hybrid solar still as a co-generative system and desalination system showed that the co-generative system had a higher efficiency and produced more distilled water compared to the desalination system. The results also demonstrated an increase in efficiency and latent cooling load for the co-generative system by increasing the concentration of the mixture.

CLEANER ENGINEERING AND TECHNOLOGY (2021)

Article Green & Sustainable Science & Technology

Exergoeconomic and environmental analysis of seawater desalination system augmented with nanoparticles and cotton hung pad

Swellam W. Sharshir et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Influence of basin metals and novel wick-metal chips pad on the thermal performance of solar desalination process

Swellam W. Sharshir et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Thermodynamics

High efficient solar evaporation by airing multifunctional textile

Guilong Peng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Green & Sustainable Science & Technology

Atmospheric water harvesting from low humid regions using tubular solar still powered by a parabolic concentrator system

Mohamed Elashmawy et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Materials Science, Multidisciplinary

Experimental study on enhancing the yield from stepped solar still coated using fumed silica nanoparticle in black paint

Ravishankar Sathyamurthy et al.

MATERIALS LETTERS (2020)

Article Engineering, Environmental

Solar still with evacuated tubes and calcium stones to enhance the yield: An experimental investigation

Hitesh Panchal et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Green & Sustainable Science & Technology

Effect of water depth on a novel absorber plate of pyramid solar still coated with TiO2 nano black paint

A. E. Kabeel et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Review Engineering, Environmental

A mini review of techniques used to improve the tubular solar still performance for solar water desalination

Swellam W. Sharshir et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Thermodynamics

Augmentation of a pyramid solar still performance using evacuated tubes and nanofluid: Experimental approach

Swellam W. Sharshir et al.

APPLIED THERMAL ENGINEERING (2019)

Article Green & Sustainable Science & Technology

Energy, exergy, exergoeconomic and enviroeconomic (4E) evaluation of a new integration of solar still with photovoltaic panel

Ayman Refat Abd Elbar et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Green & Sustainable Science & Technology

Improving performance of tubular solar still by controlling the water depth and cover cooling

A. B. Kabeel et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Review Energy & Fuels

Thin film technology for solar steam generation: A new dawn

Ammar H. Elsheikh et al.

SOLAR ENERGY (2019)

Article Green & Sustainable Science & Technology

Comparative study based on thermal, exergetic and economic analyses of a tubular solar still with semi-circular corrugated absorber

Samir M. Elshamy et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Thermodynamics

Energy and exergy analysis of solar stills with micro/nano particles: A comparative study

Swellam W. Sharshir et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Article Green & Sustainable Science & Technology

Modified pyramid solar still with v-corrugated absorber plate and PCM as a thermal storage medium

A. E. Kabeel et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Review Green & Sustainable Science & Technology

Thermal performance and exergy analysis of solar stills - A review

S. W. Sharshir et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Engineering, Chemical

Experimental investigation of a novel passive solar still with additional condensation on sidewalls

Mohammad Behshad Shafii et al.

DESALINATION AND WATER TREATMENT (2017)

Article Engineering, Chemical

Performance analysis of modified basin type double slope multi-wick solar still

Piyush Pal et al.

DESALINATION (2017)

Proceedings Paper Thermodynamics

Modelling and Performance Enhancement of Single Slope Solar Still using CFD

Vaibhav Rai Khare et al.

INTERNATIONAL CONFERENCE ON RECENT ADVANCEMENT IN AIR CONDITIONING AND REFRIGERATION, RAAR 2016 (2017)

Article Nanoscience & Nanotechnology

Robust and Low-Cost Flame-Treated Wood for High-Performance Solar Steam Generation

Guobin Xue et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Thermodynamics

Enhancing the solar still performance using nanofluids and glass cover cooling: Experimental study

S. W. Sharshir et al.

APPLIED THERMAL ENGINEERING (2017)

Article Engineering, Chemical

Assessing the performance of solar desalination system to approach near-ZLD under hyper arid environment

Ahmed F. Mashaly et al.

DESALINATION AND WATER TREATMENT (2016)

Review Thermodynamics

Factors affecting solar stills productivity and improvement techniques: A detailed review

S. W. Sharshir et al.

APPLIED THERMAL ENGINEERING (2016)

Article Engineering, Chemical

Energy and exergy analysis of flat plate solar collector-assisted active solar distillation system

Emrah Deniz

DESALINATION AND WATER TREATMENT (2016)

Article Thermodynamics

Direct vapor generation through localized solar heating via carbon-nanotube nanofluid

Xinzhi Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Article Multidisciplinary Sciences

Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation

Lin Zhou et al.

SCIENCE ADVANCES (2016)

Article Multidisciplinary Sciences

Four billion people facing severe water scarcity

Mesfin M. Mekonnen et al.

SCIENCE ADVANCES (2016)

Review Green & Sustainable Science & Technology

Review of solid-liquid phase change materials and their encapsulation technologies

Weiguang Su et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Review Green & Sustainable Science & Technology

A review of solar energy driven desalination technologies

H. Sharon et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Editorial Material Multidisciplinary Sciences

The rising pressure of global water shortages

Jan Eliasson

NATURE (2015)

Article Engineering, Chemical

Enhancing the solar still performance using solar photovoltaic, flat plate collector and hot air

Mohamed A. Eltawil et al.

DESALINATION (2014)

Article Energy & Fuels

Effect of water and air flow on concentric tubular solar water desalting system

T. Arunkumar et al.

APPLIED ENERGY (2013)

Review Green & Sustainable Science & Technology

State-of-the-art of solar thermal power plants-A review

V. Siva Reddy et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Article Thermodynamics

Cost analysis of different solar still configurations

A. E. Kabeel et al.

ENERGY (2010)

Article Engineering, Chemical

Active single basin solar still with a sensible storage medium

A. A. El-Sebaii et al.

DESALINATION (2009)

Review Green & Sustainable Science & Technology

A review of renewable energy technologies integrated with desalination systems

Mohamed A. Eltawil et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

Article Energy & Fuels

Exergy of undiluted thermal radiation

R Petela

SOLAR ENERGY (2003)