4.8 Article

Lithium Storage Mechanism and Application of Micron-Sized Lattice-Reversible Binary Intermetallic Compounds as High-Performance Flexible Lithium-Ion Battery Anodes

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Nanoengineering of 2D MXene-Based Materials for Energy Storage Applications

Jianxiao Nan et al.

Summary: 2D MXene-based nanomaterials have unique properties and applications, but face limitations in energy storage. Nanoengineering of these materials is being extensively studied to enhance performance in energy storage applications. Research on MXene-based nanostructures for energy storage is discussed, highlighting preparation methods, properties, and applications in lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, and supercapacitors. Challenges and perspectives for future development in this field are also addressed.

SMALL (2021)

Article Chemistry, Multidisciplinary

A Dendrite-Free Lithium/Carbon Nanotube Hybrid for Lithium-Metal Batteries

Zhi Yong Wang et al.

Summary: The study introduces a dendrite-free Li/carbon nanotube (CNT) hybrid, which is fabricated by coating molten Li on CNTs, effectively addressing the safety and cycling performance issues caused by dendritic Li in lithium metal batteries. The obtained hybrid demonstrates excellent stability and conductivity, showing outstanding performance even at high current densities.

ADVANCED MATERIALS (2021)

Article Chemistry, Analytical

Tin-based anode material with good reversibility of conversion reaction for lithium ion battery

Tianrui Chen et al.

Summary: Nanometerization of tin-based materials can improve their cycle stability and specific capacity. The dispersion of tin ions with organic skeleton and the introduction of carbon nanotubes help to enhance the dispersion and conductivity of active materials.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Article Chemistry, Physical

Nitrogen-rich hierarchical porous carbon paper for a free-standing cathode of lithium sulfur battery

Jae Hyun Park et al.

Summary: A novel nitrogen-rich and hierarchical porous carbon fiber material has been developed for a free-standing cathode without any additives, demonstrating outstanding electrochemical performance.

CARBON (2021)

Article Chemistry, Physical

Binder-free silicon anodes wrapped in multiple graphene shells for high-performance lithium-ion batteries

So Yeun Kim et al.

Summary: Si-based composites wrapped in multiple graphene shells were successfully fabricated as binder-free anodes for Li-ion batteries, exhibiting high initial discharge capacity, excellent cyclic stability, and superior rate capability. The multilayered structure contributed to the enhanced performance of the LIBs and could potentially advance the development of high-performance LIBs for electric vehicles.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Vertically Aligned N-doped Carbon Nanotubes Arrays as Efficient Binder-free Catalysts for Flexible Li-CO2 Batteries

Xuelian Li et al.

Summary: The Li-CO2 battery is a promising energy storage system that converts and utilizes CO2 in a green way. To address the challenges of high polarization, short cyclic life, and poor rate capability, this study developed vertically aligned N-doped carbon nanotube arrays on Ti wire as cathodes for flexible quasi-solid-state Li-CO2 batteries. This innovative approach led to improved performance in terms of cycle life, potential gap, rate capability, and flexibility, providing a new option for CO2 conversion and utilization as high-performance energy sources.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Multidisciplinary

Achieving Desirable Initial Coulombic Efficiencies and Full Capacity Utilization of Li-Ion Batteries by Chemical Prelithiation of Graphite Anode

Yifei Shen et al.

Summary: A new design strategy for prelithiation solution has been proposed to successfully prelithiate graphite anodes by selecting a suitable solvent to tune the redox potential of prelithiation reagent and prevent solvent co-intercalation. The developed prelithiation solution, lithium biphenylide/2-methyl tetrahydrofuran, accurately prelithiates graphite anodes to the desired state in a few minutes without damaging the lattice structure, leading to significantly improved performance in full cells.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Electrochemistry

In-operando Raman study of lithium plating on graphite electrodes of lithium ion batteries

M. A. Cabanero et al.

Summary: High spatial resolution in-operando Raman spectroscopy was used to study lithium deposition on graphite electrodes, showing that lithium is deposited and intercalated into graphite simultaneously. After 30 minutes, a second mechanism becomes dominant. The evolution of G and D bands of graphite and the lithium concentration in the electrolyte suggest that EC is slowly consumed after lithium plating begins.

ELECTROCHIMICA ACTA (2021)

Article Electrochemistry

Stabilizing Capacity Retention of Li-Ion Battery in Fast-Charge by Reducing Particle Size of Graphite

Sheng S. Zhang et al.

Summary: The plating of Li on the graphite anode and its reaction with electrolyte solvents are the key reasons for the performance degradation of Li-ion batteries during fast-charging. Adjusting the particle size of graphite can reduce the damage to the solid electrolyte interface, but it does not significantly improve the charging rate capability of the batteries.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Insights into the Degradation Mechanism of Nanoporous Alloy-Type Li-Ion Battery Anodes

John S. Corsi et al.

Summary: In this study, model nanoporous gold anodes were used to investigate the degradation behavior of nanostructured alloy-type anodes during cycling. Transmission electron microscopy and small-angle X-ray scattering were used across several length scales to study anodes cycled to various sequential charge states. By coupling these data sets, a general model for the degradation of the solid-electrolyte interphase (SEI) and morphology during the early stages of cycling in nanoporous alloy-type anodes was proposed.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Consecutive chemical bonds reconstructing surface structure of silicon anode for high-performance lithium-ion battery

Qiushi Wang et al.

Summary: The study proposes a new method to stabilize silicon by successive chemical bond reconstruction, assembling silicon nanoparticles in a carbon-copper framework to provide short-range electron transfer and pulverization suppression, achieving high performance and stability in lithium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Proceedings Paper Materials Science, Multidisciplinary

Recent developments of graphene composites for energy storage devices

V. Dhinakaran et al.

Summary: Graphene, a limited constituent with exceptional properties, has been extensively used as a conducting material in energy storage devices due to its unique structure and interactions among layers, showing efficiency compared to other materials in recent years.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Chemistry, Multidisciplinary

A Highly Flexible and Lightweight MnO2/Graphene Membrane for Superior Zinc-Ion Batteries

Jinjin Wang et al.

Summary: This study introduces a self-standing hybrid nanoarchitecture for flexible and foldable zinc-ion batteries, featuring high energy density and good cycling durability. The batteries can operate without capacity loss in both bent and folded circumstances, holding great promise for smart and wearable electronics.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Progress and challenges of flexible lithium ion batteries

Zhenhan Fang et al.

JOURNAL OF POWER SOURCES (2020)

Article Multidisciplinary Sciences

Circumventing huge volume strain in alloy anodes of lithium batteries

Li Hongyi et al.

NATURE COMMUNICATIONS (2020)

Article Nanoscience & Nanotechnology

Spontaneous and reversible hollowing of alloy anode nanocrystals for stable battery cycling

Matthew G. Boebinger et al.

NATURE NANOTECHNOLOGY (2020)

Article Nanoscience & Nanotechnology

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries

Fengshuo Xi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Multidisciplinary Sciences

A disordered rock salt anode for fast-charging lithium-ion batteries

Haodong Liu et al.

NATURE (2020)

Article Chemistry, Physical

Efficient TiC-C hybrid conductive matrix for ZnTe anode in Lithium-ion storage

Quoc Hai Nguyen et al.

APPLIED SURFACE SCIENCE (2020)

Article Chemistry, Physical

High Rate Transfer Mechanism of Lithium Ions in Lithium-Tin and Lithium-Indium Alloys for Lithium Batteries

Jiale Qu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Article Chemistry, Physical

Designing Flexible Lithium-Ion Batteries by Structural Engineering

Guoyu Qian et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Multidisciplinary

A Yolk-Shell Structured Silicon Anode with Superior Conductivity and High Tap Density for Full Lithium-Ion Batteries

Lei Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Review Chemistry, Multidisciplinary

Nanowires for Electrochemical Energy Storage

Guangmin Zhou et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

Flexible 3D Porous MXene Foam for High-Performance Lithium-Ion Batteries

Qian Zhao et al.

SMALL (2019)

Article Chemistry, Multidisciplinary

Transition-Metal Oxynitride: A Facile Strategy for Improving Electrochemical Capacitor Storage

Shouzhi Wang et al.

ADVANCED MATERIALS (2019)

Article Nanoscience & Nanotechnology

Flexible and Freestanding Silicon/MXene Composite Papers for High-Performance Lithium-Ion Batteries

Yuan Tian et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Chemistry, Physical

Towards the practical use of flexible lithium ion batteries

Linchao Zeng et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Nature of extra capacity in MoS2 electrodes: Molybdenum atoms accommodate with lithium

Longlu Wang et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

Layered Potassium Vanadate K0.5V2O5 as a Cathode Material for Nonaqueous Potassium Ion Batteries

Leqing Deng et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Physical

Stress-Relieved Nanowires by Silicon Substitution for High-Capacity and Stable Lithium Storage

Ting He et al.

ADVANCED ENERGY MATERIALS (2018)

Article Multidisciplinary Sciences

Hierarchically structured lithium titanate for ultrafast charging in long-life high capacity batteries

Mateusz Odziomek et al.

NATURE COMMUNICATIONS (2017)

Article Chemistry, Multidisciplinary

Amorphous GaN@Cu Freestanding Electrode for High-Performance Li-Ion Batteries

Shibing Ni et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Chemistry, Multidisciplinary

A free-standing LiFePO4-carbon paper hybrid cathode for flexible lithium-ion batteries

Katja Kretschmer et al.

GREEN CHEMISTRY (2016)

Article Materials Science, Multidisciplinary

Graphene-based integrated electrodes for flexible lithium ion batteries

Ying Shi et al.

2D MATERIALS (2015)

Article Chemistry, Multidisciplinary

A long-life lithium-ion battery with a highly porous TiNb2O7 anode for large-scale electrical energy storage

Bingkun Guo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Review Chemistry, Multidisciplinary

Progress in flexible lithium batteries and future prospects

Guangmin Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Tin-indium/graphene with enhanced initial coulombic efficiency and rate performance for lithium ion batteries

Hongxun Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Article Chemistry, Physical

ZnTe and ZnTe/C nanocomposite: a new electrode material for high-performance rechargeable Li-ion batteries

Jeong-Uk Seo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Multidisciplinary

Super-Aligned Carbon Nanotube Films as Current Collectors for Lightweight and Flexible Lithium Ion Batteries

Ke Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Review Chemistry, Physical

A review on the key issues for lithium-ion battery management in electric vehicles

Languang Lu et al.

JOURNAL OF POWER SOURCES (2013)

Article Chemistry, Multidisciplinary

Binder-Free LiCoO2/Carbon Nanotube Cathodes for High-Performance Lithium Ion Batteries

Shu Luo et al.

ADVANCED MATERIALS (2012)

Article Chemistry, Multidisciplinary

The Birth of the Lithium-Ion Battery

Akira Yoshino

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Review Chemistry, Multidisciplinary

Functional Materials for Rechargeable Batteries

Fangyi Cheng et al.

ADVANCED MATERIALS (2011)

Article Chemistry, Physical

New Anode Framework for Rechargeable Lithium Batteries

Jian-Tao Han et al.

CHEMISTRY OF MATERIALS (2011)

Article Electrochemistry

Enhanced reversible lithium storage in a nanosize silicon/graphene composite

Shu-Lei Chou et al.

ELECTROCHEMISTRY COMMUNICATIONS (2010)

Article Materials Science, Multidisciplinary

Li-ion diffusion in amorphous Si films prepared by RF magnetron sputtering: A comparison of using liquid and polymer electrolytes

J. Xie et al.

MATERIALS CHEMISTRY AND PHYSICS (2010)

Article Chemistry, Physical

Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics

Dae-Hyeong Kim et al.

NATURE MATERIALS (2010)

Article Chemistry, Physical

Determination of the diffusion coefficient of lithium ions in nano-Si

N. Ding et al.

SOLID STATE IONICS (2009)

Review Chemistry, Multidisciplinary

Nanomaterials for rechargeable lithium batteries

Peter G. Bruce et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)

Editorial Material Multidisciplinary Sciences

Materials science - Toward flexible batteries

Hiroyuki Nishide et al.

SCIENCE (2008)

Article Chemistry, Physical

Electrochemical reactions of lithium with transition metal stannides

Ming-Zhe Xue et al.

SOLID STATE IONICS (2006)

Article Electrochemistry

Co-Sn alloys as negative electrode materials for rechargeable lithium batteries

Jing-jun Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Article Chemistry, Physical

AFM study of surface film formation on a composite graphite electrode in lithium-ion batteries

SK Jeong et al.

JOURNAL OF POWER SOURCES (2003)

Article Chemistry, Physical

A climbing image nudged elastic band method for finding saddle points and minimum energy paths

G Henkelman et al.

JOURNAL OF CHEMICAL PHYSICS (2000)

Article Chemistry, Physical

XPS studies of graphite electrode materials for lithium ion batteries

RIR Blyth et al.

APPLIED SURFACE SCIENCE (2000)

Article Electrochemistry

Electrochemistry and in-situ X-ray diffraction of InSb in lithium batteries

CS Johnson et al.

ELECTROCHEMISTRY COMMUNICATIONS (2000)