Related references
Note: Only part of the references are listed.Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling
Xingchen Xu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effect of shot peening on short crack propagation in 300M steel
Amrita Bag et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Effect of different shot peening conditions on the fatigue life of 300 M steel submitted to high stress amplitudes
Amrita Bag et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Dislocation-based study on the influences of shot peening on fatigue resistance
Cheng Wang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of shot peening coverage on hardness, residual stress and surface morphology of carburized rollers
Jizhan Wu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of shot peening residual stresses and surface roughness on fretting fatigue strength of Al 7075-T651
Vicente Martin et al.
TRIBOLOGY INTERNATIONAL (2020)
Differences in phase transformation in laser peened and shot peened 304 austenitic steel
Bojan Starman et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A Comparison of the Fatigue Life of Shot-Peened 4340M Steel with 100, 200, and 300% Coverage
A. AlSumait et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
A design for lumped mass of a shot model in random peening simulation and prediction of dimple size evolution
Xudong Xiao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy
Xingchen Xu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Surface layer nanocrystallization of carbon steels subjected to severe shot peening: Analysis and optimization
Erfan Maleki et al.
MATERIALS CHARACTERIZATION (2019)
Combining the finite element method and response surface methodology for optimization of shot peening parameters
Xiaoli Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Investigation of nanostructured surface layer of severe shot peened AISI 1045 steel via response surface methodology
Okan Unal et al.
MEASUREMENT (2019)
The study of universality of a method for predicting surface nanocrystallization after high energy shot peening based on finite element analysis
Haiming Huang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail joint specimens
Qi Yang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Effect of Shot Peening Parameters to Residual Stress Profiles and Barkhausen Noise
Aki Sorsa et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2018)
The grain refinement mechanisms of various phases in shot-peened Nickel-Aluminum bronze (NAB) alloy
Bingjie Zhao et al.
MATERIALS CHARACTERIZATION (2018)
Correlation between the surface coverage of severe shot peening and surface microstructural evolutions in AISI 321: A TEM, FE-SEM and GI-XRD study
Sadegh Pour-Ali et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Nanograined surface fabricated on the pure copper by ultrasonic shot peening and an energy-density based criterion for peening intensity quantification
Fei Yin et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Reconstruction of residual stress and work hardening and their effects on the mechanical behaviour of a shot peened structure
J. Zhou et al.
MECHANICS OF MATERIALS (2018)
Effect of shot peening on the fatigue properties of nickel-based superalloy GH4169 at high temperature
Xiaohui Zhao et al.
RESULTS IN PHYSICS (2018)
Roles of surface coverage increase and re-peening on properties of AISI 1045 carbon steel in conventional and severe shot peening processes
Erfan Maleki et al.
SURFACES AND INTERFACES (2018)
Quantifying the spread in crystallographic textures due to transients in strain path in shot-peening
Zhiyu Wang et al.
MATERIALIA (2018)
A numerical study of the effects of shot peening on the short crack growth behaviour in notched geometries under bending fatigue tests
C. You et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Role of ultrasonic shot peening on low cycle fatigue behavior of 7075 aluminium alloy
Vaibhav Pandey et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Nanostructure and surface roughness in the processed surface layer of Ti-6Al-4V via shot peening
Y. G. Liu et al.
MATERIALS CHARACTERIZATION (2017)
Surface layer modifications of micro-shot-peened Al-7075-T651: Experiments and stochastic numerical simulations
M. Marini et al.
SURFACE & COATINGS TECHNOLOGY (2017)
On the effect of shot-peening on fretting fatigue of A17075-T6 under cyclic normal contact loading
G. H. Majzoobi et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Use of response surface methodology for shot peening process optimization of an aircraft structural part
Yong-Seog Nam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Optimization of shot peening parameters by response surface methodology
Okan Unal
SURFACE & COATINGS TECHNOLOGY (2016)
A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening
A. H. Mahmoudi et al.
MATERIALS & DESIGN (2016)
Fatigue crack propagation in shot peened al 7475-t7351 alloy specimens
N. Ferreira et al.
XVIII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM XVIII) (2016)
Experimental assessment and simulation of surface nanocrystallization by severe shot peening
S. M. Hassani-Gangaraj et al.
ACTA MATERIALIA (2015)
Investigation on Residual Stress Induced by Shot Peening
Chunmei Zhao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
A methodology to predict the roughness of shot peened surfaces
Mandikizinoyou Taro et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Effect of bead quantity in ultrasonic shot peening: Surface analysis and numerical simulations
Thomas Rousseau et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
A study of the residual stress induced by shot peening for an isotropic material based on Prager's yield criterion for combined stresses
J. Davis et al.
MECCANICA (2015)
Fatigue behavior of cold spray coatings: The effect of conventional and severe shot peening as pre-/post-treatment
A. Moridi et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Enhancing surface layer properties of an aircraft aluminum alloy by shot peening using response surface methodology
Yong-Seog Nam et al.
MATERIALS & DESIGN (2015)
Effect of initial surface finish on effectiveness of shot peening treatment using enhanced periodic cell model
Fan Yang et al.
INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2015)
Numerical modelling and experimental approach for surface morphology evaluation during ultrasonic shot peening
Fei Yin et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Effect of shot peening coverage on fatigue limit in round bar of annealed medium carbon steel
Junji Sakamoto et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Predicting shot peening coverage using multiphase computational fluid dynamics simulations
Van Bo Nguyen et al.
POWDER TECHNOLOGY (2014)
Mesh sensitivity assessment of shot peening finite element simulation aimed at surface grain refinement
S. Bagherifard et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Effect of coverage and double peening treatments on the fatigue life of a quenched and tempered structural steel
A. T. Vielma et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Parametric study on single shot peening by dimensional analysis method incorporated with finite element method
Xian-Qian Wu et al.
ACTA MECHANICA SINICA (2012)
On the shot peening surface coverage and its assessment by means of finite element simulation: A critical review and some original developments
Sara Bagherifard et al.
APPLIED SURFACE SCIENCE (2012)
Numerical and experimental analysis of surface roughness generated by shot peening
Sara Bagherifard et al.
APPLIED SURFACE SCIENCE (2012)
Convex formulations for optimal selection of controlled variables and measurements using Mixed Integer Quadratic Programming
Ramprasad Yelchuru et al.
JOURNAL OF PROCESS CONTROL (2012)
A 3D FE model for evaluation of peening residual stress under angled multi-shot impacts
Taehyung Kim et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Procedure to Perform a Validated Incremental Hole Drilling Measurement: Application to Shot Peening Residual Stresses
E. Valentini et al.
STRAIN (2011)
Finite Element Simulation of Shot Peening Coverage with the Special Attention on Surface Nanocrystallization
S. M. Hassani-Gangaraj et al.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) (2011)
Finite element modelling of coverage effects during shot peening of IN718
Marc Zimmermann et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2010)
A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material
S. Bagherifard et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Prediction of 3D small fatigue crack propagation in shot-peened specimens
Jinxiang Liu et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
A numerical simulation to relate the shot peening parameters to the induced residual stresses
T. Hong et al.
ENGINEERING FAILURE ANALYSIS (2008)
Effect of shot peening parameters on microhardness of AISI 1045 and 316L material: an analysis using design of experiment
S. B. Mahagaonkar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
On the influence of cold work on eddy current characterization of near-surface residual stress in shot-peened nickel-base superalloys
Feng Yu et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2006)
Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process
K Dai et al.
ACTA MATERIALIA (2004)
Share Paper
