Related references
Note: Only part of the references are listed.Effect of Luders and Portevin-Le Chatelier localization bands on plasticity and fracture of notched steel specimens studied by DIC and FE simulations
S. C. Ren et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Mechanical properties of solution heat treated Al-Zn-Mg-Cu (7075) alloy under different cooling conditions: Analysis with full field measurement and finite element modeling
Chanmi Moon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Effect of plastic anisotropy and Portevin-Le Chatelier bands on hole-expansion in AA7075 sheets in-T6 and -W tempers
Yumi Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Dynamic strain aging mechanisms in a metastable austenitic stainless steel
Javad Mola et al.
ACTA MATERIALIA (2021)
Effect of punch geometry on hole expansion ratio
Surajit Kumar Paul
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2020)
Mechanical properties, springback, and formability of W-temper and peak aged 7075 aluminum alloy sheets: Experiments and modeling
Yumi Choi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A persistent modal plastic model for instabilities in Al-Mg alloys with 1D application
Baptiste Reyne et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
On the expansion of a circular hole in an orthotropic elastoplastic thin sheet
Jinjin Ha et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A critical review on hole expansion ratio
Surajit Kumar Paul
MATERIALIA (2020)
A comparison study on forming limit prediction methods for hot stamping of 7075 aluminum sheet
Ning Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Macroscopic consequences of Piobert-Luders and Portevin-Le Chatelier bands during tensile deformation in Al-Mg alloys
Baptiste Reyne et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Kinematics of formation and cessation of type B deformation bands during the Portevin-Le Chatelier effect in an AlMg alloy
M. A. Lebyodkin et al.
RESULTS IN PHYSICS (2019)
Experimental study on the mechanical properties of 7xxx aluminium alloy sheet under different heat treatment conditions
Yumi Choi et al.
38TH INTERNATIONAL DEEP DRAWING RESEARCH GROUP ANNUAL CONFERENCE (IDDRG 2019) (2019)
Split-Ring Springback Simulations with the Non-associated Flow Rule and Evolutionary Elastic-Plasticity Models
K. J. Lee et al.
JOM (2018)
Process parameters for hot stamping of AA7075 and D-7xxx to achieve high performance aged products
Kaab Omer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Interaction of the Portevin-Le Chatelier phenomenon with ductile fracture of a thin aluminum CT specimen: experiments and simulations
Gilles Rousselier et al.
INTERNATIONAL JOURNAL OF FRACTURE (2017)
Effect of microstructure on continuous propagation of the Portevin-Le Chatelier deformation bands
D. Yuzbekova et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effects of aging on mechanical properties and microstructure of multi-directionally forged 7075 aluminum alloy
Tomoya Aoba et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Calorimetric analysis of Portevin-Le Chatelier bands under equibiaxial loading conditions in Al-Mg alloys: Kinematics and mechanical dissipation
Jean-Benoit Le Cam et al.
MECHANICS OF MATERIALS (2017)
Machining of aluminum alloys: a review
Mario C. Santos et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Influence of temper on the performance of a high-strength Al-Zn-Mg alloy sheet in the warm forming processing chain
M. Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Thermomechanical response of a TWIP steel during monotonic and non-monotonic uniaxial loading
Omid Majidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy
Jules Kouam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Unusual behavior of the Portevin-Le Chatelier effect in an AlMg alloy containing precipitates
D. A. Zhemchuzhnikova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Kinematics of Portevin-Le Chatelier bands in simple shear
P. Y. Manach et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Changes of microstructure of different quench sensitivity 7,000 aluminum alloy after end quenching
Zhi-Hui Zhang et al.
RARE METALS (2014)
Hot Stamping of a B-Pillar Outer from High Strength Aluminum Sheet AA7075
Nia R. Harrison et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2014)
Evolution of mechanical properties in a 7075 Al-alloy subject to natural ageing
Alan G. Leacock et al.
MATERIALS & DESIGN (2013)
Piobert-Luders plateau and Portevin-Le Chatelier effect in an Al-Mg alloy in simple shear
J. Coer et al.
MECHANICS RESEARCH COMMUNICATIONS (2013)
Effect of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 aluminum alloy
Songyi Chen et al.
MATERIALS & DESIGN (2012)
Warm forming behavior of high strength aluminum alloy AA7075
Wang Hui et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
The Portevin-Le Chatelier effect: a review of experimental findings
Ahmet Yilmaz
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2011)
A review on hot stamping
H. Karbasian et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Influence of aging treatment on mechanical properties of 6061 aluminum alloy
F. Ozturk et al.
MATERIALS & DESIGN (2010)
Influence of natural aging on the precipitation hardening of an AlMgSi alloy
A. Cuniberti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Precipitation of Al3(Sc,Zr) particles in an Al-Zn-Mg-Cu-Sc-Zr alloy during conventional solution heat treatment and its effect on tensile properties
O. N. Senkov et al.
ACTA MATERIALIA (2008)
The dynamics of Portevin-Le Chatelier bands in an Al-Mg alloy from infrared thermography
H. Ait-Amokhtar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
The Portevin-Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy
Herdawandi Halim et al.
ACTA MATERIALIA (2007)
Three types of Portevin-Le Chatelier effects: Experiment and modelling
Huifeng Jiang et al.
ACTA MATERIALIA (2007)
Effect of solute distribution on the strain rate sensitivity of solid solutions
RC Picu et al.
SCRIPTA MATERIALIA (2006)
High strain rate tensile testing of automotive aluminum alloy sheet
R Smerd et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)
Effect of type-B Portevin-Le Chatelier bands on the onset of necking in uniaxial tension of strip cast AA5754 sheets
JD Kang et al.
SCRIPTA MATERIALIA (2005)
Strain rate sensitivity of the commercial aluminum alloy AA5182-O
RC Picu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
On the PLC effect in strain-rate and stress-rate controlled tests-studies by laser scanning extensometry
H Neuhäuser et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2004)
Effects of pre-treatment conditions on warm hydroformability of 7075 aluminum tubes
MY Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Investigating the Portevin-Le Chatelier effect by the acoustic emission and laser extensometry techniques
F Chmelík et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
On the anisotropy of the Portevin-Le Chatelier plastic instabilities in Al-Li-Cu-Zr alloy
J Mizera et al.
SCRIPTA MATERIALIA (2001)
Spatio-temporal dynamics of the Portevin-Le Chatelier effect:: Experiment and modelling
M Lebyodkin et al.
ACTA MATERIALIA (2000)
Inverse critical strains for jerky flow in Al-Mg alloys
J Balík et al.
SCRIPTA MATERIALIA (2000)
A novel forming technology for tailor-welded blacks
B Kinsey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Share Paper
