Related references
Note: Only part of the references are listed.Interfacial reaction and shear strength of ultrasonically-assisted Sn-Ag-Cu solder joint using composite flux
Haozhong Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Interfacial evolution of pure Sn solder bearing silicon carbide nanowires under isothermal aging and thermal cycling
Mu-lan Li et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Microstructure and shear properties of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints under thermal cycling
Jianguo Cui et al.
SCIENTIFIC REPORTS (2021)
Quasi-in-situ observation on diffusion anisotropy dominated asymmetrical growth of Cu-Sn IMCs under temperature gradient
Yuanyuan Qiao et al.
ACTA MATERIALIA (2021)
Interfacial reaction, wettability, and shear strength of ultrasonic-assisted lead-free solder joints prepared using Cu-GNSs-doped flux
Zixiao Gui et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)
Maximum shear stress-controlled uniaxial tensile deformation and fracture mechanisms and constitutive relations of Sn-Pb eutectic alloy at cryogenic temperatures
Xiaoliang Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Comparative study on the reliability of SnPbSb solder joint under common thermal cycling and extreme thermal shocking
Jianhao Wang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Effects of Ni modified MWCNTs on the microstructural evolution and shear strength of Sn-3.0Ag-0.5Cu composite solder joints
Haozhong Wang et al.
MATERIALS CHARACTERIZATION (2020)
Brittle fracture induced by phase transformation of Ni-Cu-Sn intermetallic compounds in Sn-3Ag-0.5Cu/Ni solder joints under extreme temperature environment
Ruyu Tian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure, IMCs layer and reliability of Sn-58Bi solder joint reinforced by Mo nanoparticles during thermal cycling
Li Yang et al.
MATERIALS CHARACTERIZATION (2019)
Effect of Thermal Cycling on Interfacial Microstructure and Mechanical Properties of Sn-0.3Ag-0.7Cu-(-Al2O3) Nanoparticles/Cu Low-Ag Solder Joints
Jie Wu et al.
JOURNAL OF ELECTRONIC MATERIALS (2019)
Growth behavior of intermetallic compounds and early formation of cracks in Sn-3Ag-0.5Cu solder joints under extreme temperature thermal shock
Ruyu Tian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Thermal analysis of hybrid single-phase, two-phase and heat pump thermal control system (TCS) for future spacecraft
S. H. Lee et al.
APPLIED THERMAL ENGINEERING (2016)
Microstructure evolution and shear fracture behavior of aged Sn3Ag0. 5Cu/Cu solder joints
Xiaowu Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Formation and growth of intermetallic compound layers at the interface during laser soldering using Sn-Ag Cu solder on a Cu Pad
Hiroshi Nishikawa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Shear strengths and fracture behaviors of Cu/Sn37Pb/Cu soldered joints subjected to different displacement rates
Xiaowu Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Formation of compounds and Kirkendall vacancy in the Cu-Sn system
O. Minho et al.
MICROELECTRONIC ENGINEERING (2014)
Nanomechanical characterization of Sn-Ag-Cu/Cu joints-Part 1: Young's modulus, hardness and deformation mechanisms as a function of temperature
V. M. F. Marques et al.
ACTA MATERIALIA (2013)
Formation mechanism and orientation of Cu3Sn grains in Cu-Sn intermetallic compound joints
Rui Zhang et al.
MATERIALS LETTERS (2013)
Rate-dependent behavior of Sn alloy-Cu couples: Effects of microstructure and composition on mechanical shock resistance
K. E. Yazzie et al.
ACTA MATERIALIA (2012)
Effects of bump size on deformation and fracture behavior of Sn3.0Ag0.5Cu/Cu solder joints during shear testing
Yanhong Tian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Evolutions of the interface and shear strength between SnAgCu-xNi solder and Cu substrate during isothermal aging at 150°C
Ping Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Spalling behavior of interfacial intermetallic compounds in Pb-free solder joints subjected to temperature cycling loading
J. W. Ronnie Teo et al.
ACTA MATERIALIA (2008)
Impact of thermal cycling on Sn-Ag-Cu solder joints and board-level drop reliability
Luhua Xu et al.
JOURNAL OF ELECTRONIC MATERIALS (2008)
Reliability of Sn-Ag-Sb lead-free solder joints
HT Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
The nanoindentation characteristics of Cu6Sn5, Cu3Sn, and Ni3Sn4 intermetallic compounds in the solder bump
GY Jang et al.
JOURNAL OF ELECTRONIC MATERIALS (2004)
Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn-3.5Ag, Sn-3.8Ag-0.7Cu and Sn-0.7Cu) on Cu
TY Lee et al.
JOURNAL OF MATERIALS RESEARCH (2002)
Electronic structure mechanism for the Wettability of Sn-based solder alloys
WF Feng et al.
JOURNAL OF ELECTRONIC MATERIALS (2002)
Tin-lead (SnPb) solder reaction in flip chip technology
KN Tu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2001)
Microstructure and intermetallic growth effects on shear and fatigue strength of solder joints subjected to thermal cycling aging
HLJ Pang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Die attachment for-120°C to+20°C thermal cycling of microelectronics for future mars rovers -: An overview
RK Kirschman et al.
JOURNAL OF ELECTRONIC PACKAGING (2001)
Share Paper
