Related references
Note: Only part of the references are listed.Electrochemical determination of 8-hydroxyquinoline in a cosmetic product on a glassy carbon electrode modified with 1-amino-2-naphthol-4-sulphonic acid
Tugba Tabanligil Calam et al.
INSTRUMENTATION SCIENCE & TECHNOLOGY (2021)
Thermal efficiency improvement of super-lean burn spark ignition engine by stratified water insulation on piston top surface
Tsuyoshi Nagasawa et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)
Operating range, combustion, performance and emissions of an HCCI engine fueled with naphtha
Samet Celebi et al.
FUEL (2021)
Modelling of performance, emission, and combustion of an HCCI engine fueled with fusel oil-diethylether fuel blends as a renewable fuel
Seyed Mohammad Safieddin Ardebili et al.
FUEL (2021)
Prediction of performance and exhaust emissions of a CI engine fueled with multi-wall carbon nanotube doped biodiesel-diesel blends using response surface method
Hamit Solmaz et al.
ENERGY (2021)
Effects of n-heptane/toluene/ethanol ternary fuel blends on combustion, operating range and emissions in premixed low temperature combustion
Ahmet Bogrek et al.
FUEL (2021)
Combustion, performance and emission analyses of organic Manganese-Added crambe abyssinica biodiesel in a direct injection diesel engine
Ayhan Uyaroglu et al.
FUEL (2021)
Electrochemical Oxidative Determination and Electrochemical Behavior of 4-nitrophenol Based on an Au Electrode Modified with Electro-polymerized 3,5-diamino-1,2,4-triazole Film
Tugba Tabanligil Calam
ELECTROANALYSIS (2020)
An experimental examination of the effects of n-hexane and n-heptane fuel blends on combustion, performance and emissions characteristics in a HCCI engine
Bilal Aydogan
ENERGY (2020)
Effects of the fusel oil usage in HCCI engine on combustion, performance and emission
Alper Calam
FUEL (2020)
Experimental investigation of equivalence ratio effects on combustion and emissions characteristics of an H2/methanol dual-injection engine under different spark timings
Changming Gong et al.
FUEL (2020)
Effect of surfactant on wetting due to fouling in membrane distillation membrane: Application of response surface methodology (RSM) and artificial neural networks (ANN)
Bomin Kim et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2020)
Improvement of Fusel Oil Features and Effect of Its Use in Different Compression Ratios for an SI Engine on Performance and Emission
Suleyman Simsek et al.
ENERGIES (2020)
Parametric study on effects of excess air/fuel ratio, spark timing, and methanol injection timing on combustion characteristics and performance of natural gas/methanol dual-fuel engine at low loads
Zhanming Chen et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
The effects of diisopropyl ether on combustion, performance, emissions and operating range in a HCCI engine
Ahmet Uyumaz et al.
FUEL (2020)
The effect of nano-biochar on the performance and emissions of a diesel engine fueled with fusel oil-diesel fuel
Seyed Mohammad Safieddin Ardebili et al.
FUEL (2020)
The comparison of combustion, engine performance and emission characteristics of ethanol, methanol, fusel oil, butanol, isopropanol and naphtha with n-heptane blends on HCCI engine
Alper Calam et al.
FUEL (2020)
Combustion and Emission Characteristics of a Biodiesel-Hydrogen Dual-Fuel Engine
Wojciech Tutak et al.
APPLIED SCIENCES-BASEL (2020)
Experimental study on NOx formation and burnout characteristics of pulverized coal in oxygen enriched and deep-staging combustion
Tao Zhu et al.
FUEL (2020)
Effects of direct water injection on engine performance in engine fueled with hydrogen at varied excess air ratios and spark timing
Puyan Xu et al.
FUEL (2020)
A comparative study on the usage of fusel oil and reference fuels in an HCCI engine at different compression ratios
Hamit Solmaz
FUEL (2020)
An experimental investigation on combustion, performance and ringing operation characteristics of a low compression ratio early direct injection HCCI engine with ethanol fuel blends
Seyfi Polat
FUEL (2020)
RSM optimization of microwave pyrolysis parameters to produce OPS char with high yield and large BET surface area
Manoj Tripathi et al.
FUEL (2020)
Combustion characteristics, performance and emissions of an acetone/n-heptane fuelled homogenous charge compression ignition (HCCI) engine
Bilal Aydogan
FUEL (2020)
Performance analysis of HCCI engine powered by tamanu methyl ester with various inlet air temperature and exhaust gas recirculation ratios
M. Parthasarathy et al.
FUEL (2020)
A review on higher alcohol of fusel oil as a renewable fuel for internal combustion engines: Applications, challenges, and global potential
Seyed Mohammad Safieddin Ardebili et al.
FUEL (2020)
Investigation of effect of compression ratio on combustion and exhaust emissions in A HCCI engine
Alper Calam et al.
ENERGY (2019)
Study on the combustion characteristics of a high compression ratio HCCI engine fueled with natural gas
Zhongshu Wang et al.
FUEL (2019)
Optimization of the multi-carburant dose as an energy source for the application of the HCCI engine
Hagar Alm ElDin Bastawissi et al.
FUEL (2019)
Production of waste tyre oil and experimental investigation on combustion, engine performance and exhaust emissions
Ahmet Uyumaz et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
RSM based optimization of performance and emission characteristics of DI compression ignition engine fuelled with diesel/aegle marmelos oil/diethyl ether blends at varying compression ratio, injection pressure and injection timing
M. Krishnamoorthi et al.
FUEL (2018)
Optimisation of Second-Generation Biodiesel Production from Australian Native Stone Fruit Oil Using Response Surface Method
Mohammad Anwar et al.
ENERGIES (2018)
Response surface methodology (RSM) based multi-objective optimization of fusel oil-gasoline blends at different water content in SI engine
Omar I. Awad et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Influence of antioxidants on fuel stability of Calophyllum inophyllum biodiesel and RSM-based optimization of engine characteristics at varying injection timing and compression ratio
P. Mohamed Shameer et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Investigation of combined effects of compression ratio and steam injection on performance, combustion and emissions characteristics of HCCI engine
Fridhi Hadia et al.
CASE STUDIES IN THERMAL ENGINEERING (2017)
Multi-objective optimization of ethanol fuelled HCCI engine performance using hybrid GRNN-PSO
Harisankar Bendu et al.
APPLIED ENERGY (2017)
A new predictive multi-zone model for HCCI engine combustion
M. Bissoli et al.
APPLIED ENERGY (2016)
An experimental investigation into combustion and performance characteristics of an HCCI gasoline engine fueled with n-heptane, isopropanol and n-butanol fuel blends at different inlet air temperatures
Ahmet Uyumaz
ENERGY CONVERSION AND MANAGEMENT (2015)
Model-Based Multiobjective Evolutionary Algorithm Optimization for HCCI Engines
He Ma et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2015)
A Comparison of Engine Performance and the Emission of Fusel Oil and Gasoline Mixtures at Different Ignition Timings
Alper Calam et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2015)
Experimental investigations of performance, combustion and emission characteristics of ethanol and methanol fueled HCCI engine
Rakesh Kumar Maurya et al.
FUEL PROCESSING TECHNOLOGY (2014)
Homogeneous charge compression ignition (HCCI) combustion: Mixture preparation and control strategies in diesel engines
Harisankar Bendu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters
Rakesh Kumar Maurya et al.
APPLIED ENERGY (2011)
An experimental and numerical analysis of the influence of the inlet temperature, equivalence ratio and compression ratio on the HCCI auto-ignition process of Primary Reference Fuels in an engine
Hatim Machrafi et al.
FUEL PROCESSING TECHNOLOGY (2008)
Effect of compression ratio and spray injection angle on HCCI combustion in a small DI diesel engine
MY Kim et al.
ENERGY & FUELS (2006)