Related references
Note: Only part of the references are listed.Numerical Analysis of Blast Furnace with Injection of COREX Export Gas After Removal of CO2
Heng Zhou et al.
ISIJ INTERNATIONAL (2021)
CFD-DEM modelling of raceway dynamics and coke combustion in an ironmaking blast furnace
Shuai Wang et al.
FUEL (2021)
CFD study of hydrogen injection through tuyeres into ironmaking blast furnaces
Yuting Zhuo et al.
FUEL (2021)
Modeling of hydrogen shaft injection in ironmaking blast furnaces
Xiaobing Yu et al.
FUEL (2021)
Progress in biomass torrefaction: Principles, applications and challenges
Wei-Hsin Chen et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)
CFD-DEM modelling of the migration of fines in suspension flow through a solid packed bed
Zhouzun Xie et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Numerical study of fine particles behaviors in a packed bed with lateral injection using CFD-DEM
Heng Zhou et al.
POWDER TECHNOLOGY (2021)
Isothermal Carbothermal Reduction of FeTiO3 Doped with MgO
Xiangdong Xing et al.
JOM (2021)
Particle-scale modelling of raceway dynamics in a blast furnace using a smoothing method
Shuai Wang et al.
POWDER TECHNOLOGY (2021)
Particle-scale study of heat and mass transfer in a bubbling fluidised bed
Shuai Wang et al.
CHEMICAL ENGINEERING SCIENCE (2021)
A data-based soft-sensor approach to estimating raceway depth in ironmaking blast furnaces
Wangyan Li et al.
POWDER TECHNOLOGY (2021)
Computational fluid dynamics study of re-blowin operation in an ironmaking blast furnace
Yiran Liu et al.
POWDER TECHNOLOGY (2020)
Model study of central coke charging on ironmaking blast furnace performance: Effects of charging pattern and nut coke
Xiaobing Yu et al.
POWDER TECHNOLOGY (2020)
Modelling of the pyrolysis of low-rank-coal briquettes in an industrial-scale gas heat carrier pyrolyzer
Yuting Zhuo et al.
POWDER TECHNOLOGY (2020)
Three-dimensional transient modelling of coal and coke co-combustion in the dynamic raceway of ironmaking blast furnaces
Yuting Zhuo et al.
APPLIED ENERGY (2020)
Combined Experimental and Numerical Study of Charcoal Injection in a Blast Furnace: Effect of Biomass Pretreatment
Yiran Liu et al.
ENERGY & FUELS (2020)
CFD-DEM study of coke combustion in the raceway cavity of an ironmaking blast furnace
Jiaxin Cui et al.
POWDER TECHNOLOGY (2020)
Novel sintering indexes to evaluate and correlate the crystal characteristics and compressive strength in magnetite pellets
Yaozu Wang et al.
POWDER TECHNOLOGY (2020)
Computational Fluid Dynamics Study of the Thermochemical Behaviors in an Ironmaking Blast Furnace with Oxygen Enrichment Operation
Xiaobing Yu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
Numerical Study of the Influence of Burden Batch Weight on Blast Furnace Performance
Xiaobing Yu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
Model Study of Shaft Injection of Reformed Coke Oven Gas in a Blast Furnace
Ziguang Zhao et al.
ENERGY & FUELS (2020)
Pore Structure and Integrity of a Bio-Coke under Simulated Blast Furnace Conditions
Xing Xing
ENERGY & FUELS (2019)
Effect of Carbonization Conditions on the Property and Structure of Bamboo Char for Injection in Blast Furnace
Tengfei Song et al.
ISIJ INTERNATIONAL (2019)
Review on modelling approaches based on computational fluid dynamics for biomass combustion systems: Focus on fixed bed and moving grate systems
Andrea Dernbecher et al.
BIOMASS CONVERSION AND BIOREFINERY (2019)
Model analysis of gas residence time in an ironmaking blast furnace
Xiaobing Yu et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Particle-scale study of spout deflection in a flat-bottomed spout fluidized bed
Yuanhe Yue et al.
CHEMICAL ENGINEERING SCIENCE (2019)
CFD study of charcoal combustion in a simulated ironmaking blast furnace
Yiran Liu et al.
FUEL PROCESSING TECHNOLOGY (2019)
Model Study of Blast Furnace Operation with Central Coke Charging
Xiaobing Yu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)
Computational Fluid Dynamics Study of the Flow and Thermochemical Behaviors of a Carbon Composite Briquette in an Ironmaking Blast Furnace
Xiaobing Yu et al.
ENERGY & FUELS (2019)
Computational modeling of pulverized coal fired boilers - A review on the current position
G. Sankar et al.
FUEL (2019)
Three-dimensional modelling of charcoal combustion in an industrial scale blast furnace
Yiran Liu et al.
FUEL (2019)
Co-combustion of semicoke and coal in an industry ironmaking blast furnace: Lab experiments, model study and plant tests
Z. J. Hu et al.
FUEL PROCESSING TECHNOLOGY (2019)
Computational Fluid Dynamics Study of Biomass Combustion in a Simulated Ironmaking Blast Furnace: Effect of the Particle Shape
Yiran Liu et al.
ENERGY & FUELS (2018)
Review on Modeling and Simulation of Blast Furnace
Shibo Kuang et al.
STEEL RESEARCH INTERNATIONAL (2018)
Use of biomass in integrated steelmaking - Status quo, future needs and comparison to other low-CO2 steel production technologies
Hannu Suopajarvi et al.
APPLIED ENERGY (2018)
Effect of moisture on flowability of pulverized coal
Haifeng Lu et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Structural features and gasification reactivity of biomass chars pyrolyzed in different atmospheres at high temperature
Guangwei Wang et al.
ENERGY (2018)
Value-in-use of biocarbon fuel for direct injection in blast furnace ironmaking
Ka Wing Ng et al.
IRONMAKING & STEELMAKING (2018)
Physicochemical properties evolution of chars from palm kernel shell pyrolysis
Peng Wang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)
Modelling of Blast Furnace with Respective Chemical Reactions in Coke and Ore Burden Layers
Xiaobing Yu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Impact of operating parameters on biomass gasification in a fluidized bed reactor: An Eulerian-Lagrangian approach
Shuai Wang et al.
POWDER TECHNOLOGY (2018)
Biomass gasification in fluidized beds: A review of biomass moisture content and operating pressure effects
Ingrid Lopes Motta et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Co-combustion characteristics and kinetic study of anthracite coal and palm kernel shell char
Peng Wang et al.
APPLIED THERMAL ENGINEERING (2018)
Combustion behaviors and kinetics analysis of coal, biomass and plastic
Qi Wang et al.
THERMOCHIMICA ACTA (2018)
High Heating Rate Devolatilization Kinetics of Pulverized Biomass Fuels
Joakim M. Johansen et al.
ENERGY & FUELS (2018)
Effect of charcoal addition on the properties of a coke subjected to simulated blast furnace conditions
Xing Xing et al.
FUEL PROCESSING TECHNOLOGY (2017)
Extensive review of the opportunities to use biomass-based fuels in iron and steelmaking processes
Hannu Suopajarvi et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Combustion Reactivity of Biochar and Char Generated from Co-Pyrolysis of Coal and Four Additives: Application in Blast Furnace
Xuan-Ming He et al.
JOURNAL OF ENERGY ENGINEERING (2017)
Evaluation of flamelet/progress variable model for laminar pulverized coal combustion
Xu Wen et al.
PHYSICS OF FLUIDS (2017)
CFD-DEM simulation of raceway formation in an ironmaking blast furnace
Zhen Miao et al.
POWDER TECHNOLOGY (2017)
Modelling the injection of upgraded brown coals in an ironmaking blast furnace
Junhai Liao et al.
POWDER TECHNOLOGY (2017)
Current status and potential of biomass utilization in ferrous metallurgical industry
Rufei Wei et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Biomass co-firing technology with policies, challenges, and opportunities: A global review
Mohammad S. Roni et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Combustion Reactivity of Biochar and Char Generated from Co-Pyrolysis of Coal and Four Additives: Application in Blast Furnace
Xuan-Ming He et al.
JOURNAL OF ENERGY ENGINEERING (2017)
Co-firing of biomass and slagging in industrial furnace: A review on modelling approach
Arafat A. Bhuiyan et al.
JOURNAL OF THE ENERGY INSTITUTE (2017)
Modeling of Internal State and Performance of an Ironmaking Blast Furnace: Slot vs Sector Geometries
Yansong Shen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Experimental and modeling studies on CO2 gasification of biomass chars
Guangwei Wang et al.
ENERGY (2016)
Thermal behavior and kinetic analysis of co-combustion of waste biomass/low rank coal blends
Guangwei Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Conversion of injected waste plastics in blast furnace
A. Babich et al.
IRONMAKING & STEELMAKING (2016)
Combustion of eucalyptus charcoals and coals of similar volatile yields aiming at blast furnace injection in a CO2 mitigation environment
Juliana G. Pohlmann et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Combustibility and reactivity of coal blends and charcoal fines aiming use in ironmaking
Claudia Caroline Teixeira Barbieri et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2016)
Modelling of injecting a ternary coal blend into a model ironmaking blast furnace
Y. S. Shen et al.
MINERALS ENGINEERING (2016)
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
Yanqing Niu et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2016)
Biomass applications in iron and steel industry: An overview of challenges and opportunities
Elsayed Mousa et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Grindability and combustion behavior of coal and torrefied biomass blends
M. V. Gil et al.
BIORESOURCE TECHNOLOGY (2015)
Biomass as blast furnace injectant - Considering availability, pretreatment and deployment in the Swedish steel industry
Chuan Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Effect of pulverized anthracite coal particles injection on thermal and radiative characteristics of natural gas flame: An experimental study
S. H. Pourhoseini et al.
FUEL (2015)
A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing
M. Abdul Quader et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Review on CFD based models for co-firing coal and biomass
F. Tabet et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Biomass pyrolysis-A review of modelling, process parameters and catalytic studies
Abhishek Sharma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Characterization of Coal Burnout in the Raceway of an Ironmaking Blast Furnace
Yansong Shen et al.
STEEL RESEARCH INTERNATIONAL (2015)
Three-Dimensional Modeling of Flow and Thermochemical Behavior in a Blast Furnace
Yansong Shen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Development of Low-Emission Integrated Steelmaking Process
Sharif Jahanshahi et al.
JOURNAL OF SUSTAINABLE METALLURGY (2015)
Bioreducer use in Finnish blast furnace ironmaking - Analysis of CO2 emission reduction potential and mitigation cost
Hannu Suopajarvi et al.
APPLIED ENERGY (2014)
The effect of torrefaction on the chlorine content and heating value of eight woody biomass samples
Tiina Keipi et al.
BIOMASS & BIOENERGY (2014)
Experimental Simulation and Analysis of Agricultural Waste Injection as an Alternative Fuel for Blast Furnace
Carlos Frederico Campos de Assis et al.
ENERGY & FUELS (2014)
Evaluation of the combustion behaviour and ash characteristics of biomass waste derived fuels, pine and coal in a drop tube furnace
Gongliang Wang et al.
FUEL (2014)
An overview of the behaviour of biomass during combustion: Part II. Ash fusion and ash formation mechanisms of biomass types
Stanislav V. Vassilev et al.
FUEL (2014)
Combustibility of biochar injected into the raceway of a blast furnace
Agung Tri Wijayanta et al.
FUEL PROCESSING TECHNOLOGY (2014)
Evaluation of catalytic combustion of pulverized coal for use in pulverized coal injection (PCI) and its influence on properties of unburnt chars
Chong Zou et al.
FUEL PROCESSING TECHNOLOGY (2014)
Numerical Study on Pulverized Biochar Injection in Blast Furnace
Agung Tri Wijayanta et al.
ISIJ INTERNATIONAL (2014)
Production and characterization of microporous activated carbons and metallurgical bio-coke from waste shell biomass
Su-Hwa Jung et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)
Model study of the effect of bird's nest on transport phenomena in the raceway of an ironmaking blast furnace
Yansong Shen et al.
MINERALS ENGINEERING (2014)
Sticking behavior of iron ore-coal pellets and its inhibition
Jiaxin Li et al.
POWDER TECHNOLOGY (2014)
A review of biomass co-firing in North America
Ezinwa Agbor et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Characterisation and model fitting kinetic analysis of coal/biomass co-combustion
Guangwei Wang et al.
THERMOCHIMICA ACTA (2014)
Analysis of the combustion and pyrolysis of dried sewage sludge by TGA and MS
Aneta Magdziarz et al.
WASTE MANAGEMENT (2014)
Using Biomass for Pig Iron Production: A Technical, Environmental and Economical Assessment
G. Fick et al.
WASTE AND BIOMASS VALORIZATION (2014)
Charcoal injection in blast furnaces (Bio-PCI): CO2 reduction potential and economic prospects
Cristobal Feliciano-Bruzual
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2014)
A new concept of auxiliary fuel injection through tuyeres in blast furnaces developed by numerical simulations
Bruno Orlando de Almeida Santos et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2014)
Stump torrefaction for bioenergy application
Khanh-Quang Tran et al.
APPLIED ENERGY (2013)
Thermogravimetric analysis and kinetics of co-pyrolysis of raw/torrefied wood and coal blends
Ke-Miao Lu et al.
APPLIED ENERGY (2013)
Study on Density, Hardness, and Moisture Uptake of Torrefied Wood Pellets
J. H. Peng et al.
ENERGY & FUELS (2013)
An Integrated Evaluation System of Anthracite, Meager-lean Coal and Bituminous Coal Co-injection for a Blast Furnace
S. Ren et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2013)
Impact of biomass char on coal char burn-out under air and oxy-fuel conditions
Timipere S. Farrow et al.
FUEL (2013)
Substitution of Charcoal for Coke Breeze in Iron Ore Sintering
Liming Lu et al.
ISIJ INTERNATIONAL (2013)
Physicochemical characterisation of torrefied biomass
Raimie H. H. Ibrahim et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2013)
Optimization of a Steel Plant with Multiple Blast Furnaces Under Biomass Injection
Carl-Mikael Wiklund et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
The potential of using biomass-based reducing agents in the blast furnace: A review of thermochemical conversion technologies and assessments related to sustainability
Hannu Suopajarvi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
BIO-PCI, Charcoal injection in Blast Furnaces: State of the art and economic perspectives
C. Feliciano-Bruzual et al.
REVISTA DE METALURGIA (2013)
Analysis of synthetic natural gas injection into charcoal blast furnace
Elisa Pinto da Rocha et al.
Journal of Materials Research and Technology-JMR&T (2013)
Analysis of the combined injection of pulverized coal and charcoal into large blast furnaces
José Adilson de Castro et al.
Journal of Materials Research and Technology-JMR&T (2013)
Modelling The Combustion Of Charcoal In A Model Blast Furnace
Yansong Shen et al.
7TH INTERNATIONAL SYMPOSIUM ON MULTIPHASE FLOW, HEAT MASS TRANSFER AND ENERGY CONVERSION (2013)
Review of fast pyrolysis of biomass and product upgrading
A. V. Bridgwater
BIOMASS & BIOENERGY (2012)
Torrefied biomasses in a drop tube furnace to evaluate their utility in blast furnaces
Wei-Hsin Chen et al.
BIORESOURCE TECHNOLOGY (2012)
Reducing Net CO2 Emissions Using Charcoal as a Blast Furnace Tuyere Injectant
John G. Mathieson et al.
ISIJ INTERNATIONAL (2012)
Biomass as a Source of Renewable Carbon for Iron and Steelmaking
Terry Norgate et al.
ISIJ INTERNATIONAL (2012)
CFD study of in-furnace phenomena of pulverised coal injection in blast furnace: Effects of operating conditions
Y. S. Shen et al.
POWDER TECHNOLOGY (2012)
Estimating profitability of two biochar production scenarios: slow pyrolysis vs fast pyrolysis
Tristan R. Brown et al.
BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2011)
Impact of torrefaction on the grindability and fuel characteristics of forest biomass
Manunya Phanphanich et al.
BIORESOURCE TECHNOLOGY (2011)
Enhancing the combustible properties of bamboo by torrefaction
Patrick Rousset et al.
BIORESOURCE TECHNOLOGY (2011)
Three-dimensional modelling of in-furnace coal/coke combustion in a blast furnace
Y. S. Shen et al.
FUEL (2011)
A Six-phases 3-D Model to Study Simultaneous Injection of High Rates of Pulverized Coal and Charcoal into the Blast Furnace with Oxygen Enrichment
Jose Adilson de Castro et al.
ISIJ INTERNATIONAL (2011)
CFD Modelling and Analysis of Pulverized Coal Injection in Blast Furnace: An Overview
Yansong Shen et al.
STEEL RESEARCH INTERNATIONAL (2011)
Energy requirement for fine grinding of torrefied wood
Vincent Repellin et al.
BIOMASS & BIOENERGY (2010)
Pyrolysis of wheat straw in a thermogravimetric analyzer: Effect of particle size and heating rate on devolatilization and estimation of global kinetics
Thilakavathi Mani et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2010)
Pulverized coal burnout in blast furnace simulated by a drop tube furnace
Shan-Wen Du et al.
ENERGY (2010)
A study on torrefaction of various biomass materials and its impact on lignocellulosic structure simulated by a thermogravimetry
Wei-Hsin Chen et al.
ENERGY (2010)
Potential for reduction of CO2 emissions and a low-carbon scenario for the Brazilian industrial sector
Mauricio F. Henriques et al.
ENERGY POLICY (2010)
An investigation of the grindability of two torrefied energy crops
T. G. Bridgeman et al.
FUEL (2010)
Optimisation study of ironmaking using biomass
H. Helle et al.
IRONMAKING & STEELMAKING (2010)
Charcoal Behaviour by Its Injection into the Modern Blast Furnace
Alexander Babich et al.
ISIJ INTERNATIONAL (2010)
A Brief Overview of Low CO2 Emission Technologies for Iron and Steel Making
Chunbao (Charles) Xu et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2010)
Biomass for iron ore sintering
Mohammad Zandi et al.
MINERALS ENGINEERING (2010)
Reactivity of Brazilian Coal, Charcoal, Imported Coal and Blends Aiming to Their Injection into Blast Furnaces
Janaina Goncalves Maria da Silva Machado et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2010)
Reactivity and Conversion Behaviour of Brazilian and Imported Coals, Charcoal and Blends in view of their Injection into Blast Furnaces
J. G. M. S. Machado et al.
STEEL RESEARCH INTERNATIONAL (2010)
An overview on oxyfuel coal combustion-State of the art research and technology development
Terry Wall et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2009)
An evaluation on rice husks and pulverized coal blends using a drop tube furnace and a thermogravimetric analyzer for application to a blast furnace
Wei-Hsin Chen et al.
ENERGY (2009)
Biotar Ironmaking Using Wooden Biomass and Nanoporous Iron Ore
Yuichi Hata et al.
ENERGY & FUELS (2009)
Biochar as a Fuel: 1. Properties and Grindability of Biochars Produced from the Pyrolysis of Mallee Wood under Slow-Heating Conditions
Hanisom Abdullah et al.
ENERGY & FUELS (2009)
A three-dimensional numerical study of the combustion of coal blends in blast furnace
Y. S. Shen et al.
FUEL (2009)
Potential CO2 emission reduction for BF-BOF steelmaking based on optimised use of ferrous burden materials
Chuan Wang et al.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2009)
Behaviour of coal ashes for pulverised coal injection at high temperatures in relation to their chemical and mineralogical composition - experimental and computational analysis
M. C. Bagatini et al.
IRONMAKING & STEELMAKING (2009)
Environmental and Economic Aspects of Charcoal Use in Steelmaking
Terry Norgate et al.
ISIJ INTERNATIONAL (2009)
Model Study of the Effects of Coal Properties and Blast Conditions on Pulverized Coal Combustion
Yansong Shen et al.
ISIJ INTERNATIONAL (2009)
Mathematical Optimization of Ironmaking with Biomass as Auxiliary Reductant in the Blast Furnace
Hannu Helle et al.
ISIJ INTERNATIONAL (2009)
Pretreatment of agricultural residues for co-gasification via torrefaction
Jian Deng et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Torrefaction of reed canary grass, wheat straw and willow to enhance solid fuel qualities and combustion properties
T. G. Bridgeman et al.
FUEL (2008)
Influence of torrefaction on the grindability and reactivity of woody biomass
B. Arias et al.
FUEL PROCESSING TECHNOLOGY (2008)
CFD studies on biomass thermochemical conversion
Yiqun Wang et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2008)
Three-dimensional modelling of coal combustion in blast furnace
Yansong Shen et al.
ISIJ INTERNATIONAL (2008)
Impact of radiation models in CFD simulations of steam cracking furnaces
A. Habibi et al.
COMPUTERS & CHEMICAL ENGINEERING (2007)
Performances of pulverized coal injection in blowpipe and tuyere at various operational conditions
Shan-Wen Du et al.
ENERGY CONVERSION AND MANAGEMENT (2007)
Numerical simulation of effect of tuyere angle and wall scaffolding on unsteady gas and particle flows including raceway in blast furnace
Toshihiko Umekage et al.
ISIJ INTERNATIONAL (2007)
Studying the melting behavior of coal, biomass, and coal/biomass ash using viscosity and heated stage XRD data
S. Arvelakis et al.
ENERGY & FUELS (2006)
Devolatilization characteristics of biomass at flash heating rate
SN Xiu et al.
FUEL (2006)
Numerical prediction and practical improvement of pulverized coal combustion in blast furnace
SW Du et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2006)
A blast furnace prediction model combining neural network with partial least square regression
XJ Hao et al.
STEEL RESEARCH INTERNATIONAL (2005)
Toward an understanding of coal combustion in blast furnace tuyere injection
JG Mathieson et al.
FUEL (2005)
Numerical predictions on the influences of the air blast velocity, initial bed porosity and bed height on the shape and size of raceway zone in a blast furnace
SS Mondal et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2005)
Exploring the possibilities of using Brazilian subbituminous coals for blast furnace pulverized fuel injection
W Kalkreuth et al.
FUEL (2005)
Fundamental ash deposition characteristics in pulverized coal reaction under high temperature conditions
I Naruse et al.
FUEL (2005)
Predicition of stable and unstable flows in blast furnace raceway using numerical simulation methods for gas and particles
S Yuu et al.
ISIJ INTERNATIONAL (2005)
Transformation and release to the gas phase of Cl, K, and S during combustion of annual biomass
JN Knudsen et al.
ENERGY & FUELS (2004)
Use of numerical modeling in design for co-firing biomass in wall-fired burners
CG Yin et al.
CHEMICAL ENGINEERING SCIENCE (2004)
Prediction of raceway size in blast furnace from two dimensional experimental correlations
S Rajneesh et al.
ISIJ INTERNATIONAL (2004)
Exergy analysis of charcoal charging operation of blast furnace
H Nogami et al.
ISIJ INTERNATIONAL (2004)
Raceway design for the innovative blast furnace
H Nogami et al.
ISIJ INTERNATIONAL (2004)
Numerical study of gas-solid flow in the raceway of a blast furnace
YQ Feng et al.
STEEL RESEARCH INTERNATIONAL (2003)
Importance of frictional forces on the formation of cavity in a packed bed under cross flow of gas
S Rajneesh et al.
POWDER TECHNOLOGY (2003)
Modelling the motion of cylindrical particles in a nonuniform flow
CG Yin et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Effect of large aspect ratio of biomass particles on carbon burnout in a utility boiler
D Gera et al.
ENERGY & FUELS (2002)
CO2 in the iron and steel industry:: an analysis of Japanese emission reduction potentials
D Gielen et al.
ENERGY POLICY (2002)
Interaction between molten coal ash and coke in raceway of blast furnace
K Khairil et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)
Numerical simulation of the gas-solid flow in a bed with lateral gas blasting
BH Xu et al.
POWDER TECHNOLOGY (2000)