Related references
Note: Only part of the references are listed.A semi-empirical model for CO2 erosion-corrosion of carbon steel pipelines in wet gas-solid flow
Lei Zhao et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)
Corrosion behavior of 13Cr stainless steel under stress and crevice in high pressure CO2/O2 environment
G. Y. Zhu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Dynamic probability assessment of urban natural gas pipeline accidents considering integrated external activities
Xinhong Li et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)
Joint condition-based maintenance and condition-based production optimization
Michiel A. J. Uit Het Broek et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)
Recent Advances in Sensing and Assessment of Corrosion in Sewage Pipelines
Sahar Foorginezhad et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Corrosion simulation via coupling computational fluid dynamics and NORSOK CO2 corrosion rate prediction model for an outlet header piping of an air-cooled heat exchanger
Mohammad Mahdi Dana et al.
ENGINEERING FAILURE ANALYSIS (2021)
A probabilistic model to estimate microbiologically influenced corrosion rate
Abdul-Waris Dawuda et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Uncertainty failure risk quantitative assessments for underground gas storage near-wellbore area
Shengyue Zhang et al.
JOURNAL OF ENERGY STORAGE (2021)
Risk analysis of an underground gas storage facility using a physics-based system performance model and Monte Carlo simulation
Zaki Syed et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)
A sustainable and preventative warning strategy for the safe production of underground hydrocarbon storage
Shengyue Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Pitting corrosion modelling of X80 steel utilized in offshore petroleum pipelines
Ehsan Arzaghi et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Performance of empirical Bayes estimation techniques used in probabilistic risk assessment
Andrei Gribok et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)
Reliability analysis of systems considering clusters of dependent degrading components
Nooshin Yousefi et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)
Characterization, formation and development of scales on L80 steel tube resulting from seawater injection treatment
Yan Yang et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
A novel risk analysis approach of casing under complex conditions using copulas
Lei Zhao et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
Finite element analyses of corroded pipeline with single defect subjected to internal pressure and axial compressive stress
Thibankumar Arumugam et al.
MARINE STRUCTURES (2020)
Characterization of 13Cr steel corrosion in simulated EOR-CCUS environment with flue gas impurities
Yong Xiang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Risk assessment of hydrogen generation unit considering dependencies using integrated DEMATEL and TOPSIS approach
Xinhong Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Data driven approach to risk management and decision support for dynamic positioning systems
Tarannom Parhizkar et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)
An integrated dynamic failure assessment model for offshore components under microbiologically influenced corrosion
Sidum Adumene et al.
OCEAN ENGINEERING (2020)
Stochastic modeling of corrosion growth
Changxi Wang et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)
The role of Ca2+ ions on Ca/Fe carbonate products on X65 carbon steel in CO2 corrosion environments at 80 and 150 °C
Amir Shamsa et al.
CORROSION SCIENCE (2019)
Dynamic risk assessment of subsea pipelines leak using precursor data
Xinhong Li et al.
OCEAN ENGINEERING (2019)
Understanding the general and localized corrosion mechanisms of Cr-containing steels in supercritical CO2-saturated aqueous environments
Liang Wei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A bibliometric review of process safety and risk analysis
Md Tanjin Amin et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
The formation of FeCO3 and Fe3O4 on carbon steel and their protective capabilities against CO2 corrosion at elevated temperature and pressure
Yong Hua et al.
CORROSION SCIENCE (2019)
Characterization of wellbore casing corrosion product as a permeable porous medium
Ishtiaque Anwar et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)
Joint optimization of monitoring quality and replacement decisions in condition-based maintenance
Khanh T. P. Nguyen et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)
A comprehensive review of metal corrosion in a supercritical CO2 environment
Gan Cui et al.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2019)
Sustainable maintainability management practices for offshore assets: A data-driven decision strategy
Shengyue Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Stress corrosion crack evaluation of super 13Cr tubing in high-temperature and high-pressure gas wells
Zhang Zhi et al.
ENGINEERING FAILURE ANALYSIS (2019)
The visualization of rub-impact characteristics of drill string on casing
Laoyin Chen et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)
A stochastic defect growth model for reliability assessment of corroded underground pipelines
Hui Wang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Safety of pressure pipe operation with corrosive defect
V Chmelko et al.
3RD INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2019) (2019)
Experimental and numerical study on internal pressure load capacity and failure mechanism of CO2 corroded tubing
Zhenyi Liu et al.
ENERGY (2018)
Condition assessment, remaining useful life prediction and life extension decision making for offshore oil and gas assets
Isaac Animah et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2018)
Finite service life evaluation method of production casing for sour-gas wells
Zhang Zhi et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)
Modeling the Aliso Canyon underground gas storage well blowout and kill operations using the coupled well-reservoir simulator T2Well
Lehua Pan et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)
Pressurized CO2 releases in the framework of carbon sequestration and enhanced oil recovery safety analysis: Experiments and model
Paolo Mocellin et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Real-time risk assessment of casing-failure incidents in a whole fracturing process
Qianlin Wang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Neural network modelling of high pressure CO2 corrosion in pipeline steels
Muhammad Hashim Abbas et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Uncertainty quantification in erosion predictions using data mining methods
Wei Dai et al.
WEAR (2018)
Well completion issues for underground gas storage in oil and gas reservoirs in China
Mingxing Bai et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)
Sequential Monte Carlo simulation for robust optimal design of cooling water system with quantified uncertainty and reliability
Qi Cheng et al.
ENERGY (2017)
Remaining Useful Life Prediction Based on a General Expression of Stochastic Process Models
Naipeng Li et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)
Geomechanical aspects of reservoir thermal alteration: A literature review
J. A. Uribe-Patino et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2017)
Confidence intervals through sequential Monte Carlo
Ivair R. Silva
COMPUTATIONAL STATISTICS & DATA ANALYSIS (2017)
A probability based model for the erosive wear of concrete by sediment bearing water
Ramkrishna Dandapat et al.
WEAR (2016)
Methods and models in process safety and risk management: Past, present and future
Faisal Khan et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)
Well completion and integrity evaluation for CO2 injection wells
Mingxing Bai et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Erosion-corrosion at different locations of X65 carbon steel elbow
L. Zeng et al.
CORROSION SCIENCE (2014)
Corrosion behavior of steels for CO2 injection
O. Yevtushenko et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2014)
Microbial Corrosion in Linepipe Steel Under the Influence of a Sulfate-Reducing Consortium Isolated from an Oil Field
Faisal M. AlAbbas et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
The probability distribution of maintenance cost of a system affected by the gamma process of degradation: Finite time solution
Tianjin Cheng et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2012)
Hazards from carbon dioxide capture, transport and storage
Jill Wilday et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2011)
A methodology for risk-based inspection planning of oil and gas pipes based on fuzzy logic framework
Maneesh Singh et al.
ENGINEERING FAILURE ANALYSIS (2009)
Machine and component residual life estimation through the application of neural networks
M. A. Herzog et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2009)
A survey of the application of gamma processes in maintenance
J. M. van Noortwijk
RELIABILITY ENGINEERING & SYSTEM SAFETY (2009)