Related references
Note: Only part of the references are listed.Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach
Suganeswaran Kandasamy et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2022)
Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing
K. Suganeswaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
Microstructural characterization and tribological behavior of surface composites fabricated on AA7050-T7451 alloy via friction stir processing
Namrata Gangil et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)
Effect of processing speed on wear and corrosion behavior of novel MoS2 and CeO2 reinforced hybrid aluminum matrix composites fabricated by friction stir processing
Pabitra Maji et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Fabrication of Al5083 surface hybrid nanocomposite reinforced by CNTs and Al2O3 nanoparticles using friction stir processing
Farhad Ostovan et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Phase, microstructure and tensile strength of Al-Al2O3-C hybrid metal matrix composites
Naseem Ahamad et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)
Corrosion behavioral studies on AA7075 surface hybrid composites tailored through friction stir processing
Suganeswaran Kandasamy et al.
ANTI-CORROSION METHODS AND MATERIALS (2020)
Mechanical and tribological properties of AA7075-T6 metal matrix composite reinforced with ceramic particles and aloevera ash via Friction stir processing
Lakshay Tyagi et al.
MATERIALS RESEARCH EXPRESS (2020)
Different reinforcement strategies of hybrid surface composite AA6061/(B4C+MoS2) produced by friction stir processingVerschiedene Strategien beim Ruhrreibschweissen zur Verstarkung von Hybrid-Oberflachenverbundwerkstoffen aus AA6061/(B4C+MoS2)
D. K. Sharma et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2020)
Defect formation during dissimilar aluminium friction stir welded T-joints
Mubeen Ali et al.
MECHANICS & INDUSTRY (2020)
Development of A356/Al2O3 + SiO2 surface hybrid nanocomposite by friction stir processing
Mohammad Mandi Jalilvand et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface composites
H. A. Deore et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of Boron Addition on Creep Strain during Impression Creep of P91 Steel
Akhil Khajuria et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy
C. Rajendran et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Effect of Multipass on Microstructure and Impact Toughness of As-Cast Al-20Si Alloy via Friction Stir Processing
Yongjing Yang et al.
PHYSICS OF METALS AND METALLOGRAPHY (2019)
Investigations on micro hardness, electrical and thermal conductivity of AA7075 surface hybrid composites produced through friction stir processing
K. Suganeswaran et al.
MATERIALS RESEARCH EXPRESS (2019)
Machinability of AA7075-T6/carbon nanotube surface composite fabricated by friction stir processing
Ramin Mehdizad Tekiyeh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2019)
Characterization of NbC-Reinforced AA7075 Alloy Composites Produced Using Friction Stir Processing
T. Satish Kumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Influence of ceramic Al2O3 particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs
Akhil Khajuria et al.
WORLD JOURNAL OF ENGINEERING (2019)
Influence of test temperature on impact toughness of X70 pipe steel welds
Yevstakhiy Kryzhanivskyy et al.
6TH INTERNATIONAL CONFERENCE FRACTURE MECHANICS OF MATERIALS AND STRUCTURAL INTEGRITY (FMSI 2019) (2019)
Friction stir processing of Al6061-SiC-graphite hybrid surface composites
Abhishek Sharma et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Ductilizing of cast hypereutectic Al-17%Si alloy by friction stir processing
Nitin Saini et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2018)
Low cost metal matrix composites based on aluminum, magnesium and copper reinforced with fly ash prepared using friction stir processing
Isaac Dinaharan et al.
COMPOSITES COMMUNICATIONS (2018)
High temperature sliding wear behavior of AA6061/fly ash aluminum matrix composites prepared using compocasting process
J. David Raja Selvam et al.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2017)
Wear properties of Al-Al2O3/TiB2 surface hybrid composite layer prepared by friction stir process
Reza Vatankhah Barenji et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al-SiCp composite
Adetayo Abdulmumin Adebisi et al.
COMPOSITE INTERFACES (2016)
Microstructure and wear characterization of aluminum matrix composites reinforced with industrial waste fly ash particulates synthesized by friction stir processing
I. Dinaharan et al.
MATERIALS CHARACTERIZATION (2016)
Fabrication of Al5083 surface composites reinforced by CNTs and cerium oxide nano particles via friction stir processing
S. A. Hosseini et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting
Shashi Prakash Dwivedi et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2015)
Effect of Particle Size on Wear Behavior of Al-Garnet Composites
Anju Sharma et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2015)
Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing
I. Sudhakar et al.
DEFENCE TECHNOLOGY (2015)
Hardness of Multi Wall Carbon Nanotubes reinforced aluminium matrix composites
Christopher R. Bradbury et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate
Jian Han et al.
MATERIALS & DESIGN (2014)
Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength
Mohsen Bahrami et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Influence of fly ash particles on tensile and impact behaviour of aluminium (Al/3Cu/8.5Si) metal matrix composites
Krishnan Ravi Kumar et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2014)
Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing
L. Suvarna Raju et al.
DEFENCE TECHNOLOGY (2014)
Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid composites via friction stir processing
A. Devaraju et al.
MATERIALS & DESIGN (2013)
Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing
R. Sathiskumar et al.
MATERIALS CHARACTERIZATION (2013)
Recrystallization Phenomena During Friction Stir Processing of Hypereutectic Aluminum-Silicon Alloy
A. G. Rao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
A novel technique for development of A356/Al2O3 surface nanocomposite by friction stir processing
Y. Mazaheri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing
S. A. Alidokht et al.
MATERIALS & DESIGN (2011)
On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior
Mohsen Barmouz et al.
MATERIALS CHARACTERIZATION (2011)
Microstructure Evolution during Friction Stir Welding of Aluminum Alloy AA2219
K. S. Arora et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)
Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing
Essam R. I. Mahmoud et al.
WEAR (2010)
A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing
Wei Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
T. R. McNelley et al.
SCRIPTA MATERIALIA (2008)
Microstructure evolution during FSW/FSP of high strength aluminum alloys
JQ Su et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Share Paper
