Related references
Note: Only part of the references are listed.Evaluation of desirability function approach and grey relation analysis for modeling circularity, perpendicularity and cylindricity in drilling magnesium AZ31
M. Varatharajulu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)
Machining Temperature and Accuracy of Magnesium Alloy AZ31 with Deep-Hole Small Drilling
Takashi Inoue et al.
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY (2021)
Mg17Al12 phase refinement and the improved mechanical performance of Mg?6Al alloy with trace erbium addition
K. Korgiopoulos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
MODELING AND OPTIMIZATION OF HOLE ACCURACY AND DRILLING TIME IN MAGNESIUM AZ31 PLATE
M. Varatharajulu et al.
SURFACE REVIEW AND LETTERS (2021)
Evaluation of Cutting-Tool Coating on the Surface Roughness and Hole Dimensional Tolerances during Drilling of Al6061-T651 Alloy
Hamza A. Al-Tameemi et al.
MATERIALS (2021)
The effects of through tool cryogenic machining on the hole quality in GLARE? fibre metal laminates
Khaled Giasin et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Review on the effect of different processing techniques on the microstructure and mechanical behaviour of AZ31 Magnesium alloy
M. Rakshith et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Comparative evaluation of hole making processes in magnesium alloy AZ31 under dry machining condition
Justin A. Gonsalves et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Experimental study on drilling force during drilling of AZ91D magnesium alloy
P. Umamaheswarrao et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Research and Development in Magnesium Alloys for Industrial and Biomedical Applications: A Review
Vaira Vignesh Ramalingam et al.
METALS AND MATERIALS INTERNATIONAL (2020)
A new severe plastic deformation method: thin-walled open channel angular pressing (TWO-CAP)
Mehmet Sahbaz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Effect of dipped cryogenic approach on thrust force, temperature, tool wear and chip formation in drilling of AZ31 magnesium alloy
Ugur Koklu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of die parameters on the grain size, mechanical properties and fracture mechanism of extruded AZ31 magnesium alloys
Onder Ayer
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Experimental study on the effects of cold chamber die casting parameters on high-speed drilling machinability of casted AZ91 alloy
Sakir Yazman et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
A review: drilling performance and hole quality of aluminium alloys for aerospace applications
Muhammad Aamir et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Mechanical properties and applications of Magnesium alloy - Review
S. Jayasathyakawin et al.
MATERIALS TODAY-PROCEEDINGS (2020)
A sustainability comparison between drilling and milling for hole-enlargement in machining of hardened steels
Asif Iqbal et al.
MACHINING SCIENCE AND TECHNOLOGY (2019)
Effects of the drill flute number on drilling of a casted AZ91 magnesium alloy
Ugur Koklu et al.
MATERIALS TESTING (2019)
Effect of different machining parameters on surface roughness of aluminium alloys based on Si and Mg content
Taoheed Olohunde Sadiq et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Experimental study of magnesium drilling based on the surface quality
Beatriz de Agustina et al.
12TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (2019)
Influence of extrusion speed on the seam weld quality in the porthole die extrusion of AZ31 magnesium alloy tube
Zhiwen Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Tool Selection in Drilling of Magnesium UNSM11917 Pieces under Dry and MQL Conditions based on Surface Roughness
F. Berzosa et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
Prediction of cutting temperature in orthogonal machining of AISI 316L using artificial neural network
Fuat Kara et al.
APPLIED SOFT COMPUTING (2016)
Effect of aluminum content on machining characteristics of AZ31 and AZ91 magnesium alloys during drilling
B. Ratna Sunil et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2016)
Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy
S. Dinesh et al.
MATERIALS & DESIGN (2015)
An experimental and numerical study of the effect of cryogenic cooling on the surface integrity of drilled holes in AZ31B Mg alloy
A. H. Kheireddine et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
The microstructure and mechanical properties of AZ31 magnesium alloy aircraft brackets produced by a new forging technology
Anna Dziubinska et al.
2ND INTERNATIONAL MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING CONFERENCE, MIMEC2015 (2015)
Characteristics of chip formation in the micro-drilling of multi-material sheets
Lijuan Zheng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Twinning-induced dynamic recrystallization in a magnesium alloy extruded at 450 °C
Q. Ma et al.
SCRIPTA MATERIALIA (2011)
Dry and minimum quantity lubrication drilling of cast magnesium alloy (AM60)
Sukanta Bhowmick et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Mechanical properties and texture evolution during rolling process of an AZ31 Mg alloy
Shujin Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy
G. Ben Hamu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80
Muhammad Shahzad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Fabrication of extraordinary high-strength magnesium alloy by hot extrusion
T. Homma et al.
SCRIPTA MATERIALIA (2009)
Effect of grain refinement of magnesium alloy AZ31 by severe plastic deformation on material characteristics
S. H. Kang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Grain size and texture changes of magnesium alloy AZ31 during multi-directional forging
Yang Xu-yue et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2008)
Evaluation of low cycle fatigue life in AZ31 magnesium alloy
S. Hasegawa et al.
INTERNATIONAL JOURNAL OF FATIGUE (2007)
Analysis of high-temperature deformation and microstructure of an AZ31 magnesium alloy
S. Spigarelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Flow softening behavior during high temperature deformation of AZ31Mg alloy
Byoung Ho Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Effects of extrusion ratio on the microstructure and mechanical properties of AZ31 Mg alloy
Yongjun Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter
A. Kakaboura et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2007)
Effect of strontium on the microstructure, mechanical properties, and fracture behavior of AZ31 magnesium alloy
XQ Zeng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
An experimental investigation of the effect of coatings and cutting parameters on the dry drilling performance of aluminium alloys
A Rivero et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Effect of texture on fracture toughness in extruded AZ31 magnesium alloy
H Somekawa et al.
SCRIPTA MATERIALIA (2005)
A case for aggressive drilling of aluminum
RF Hamade et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Ultra-fine grain development in an AZ31 magnesium alloy during multi-directional forging under decreasing temperature conditions
J Xing et al.
MATERIALS TRANSACTIONS (2005)
Microstructure and texture development during hydrostatic extrusion of magnesium alloy AZ31
J Bohlen et al.
SCRIPTA MATERIALIA (2005)
Light emission, chip morphology, and burr formation in drilling the bulk metallic glass
M Bakkal et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Influence of grain size on hot working stresses and microstructures in Mg-3Al-lZn
MR Barnett et al.
SCRIPTA MATERIALIA (2004)
Grain refining of magnesium alloy AZ31 by rolling
TC Chang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Optimizing drilling conditions for AZ61A magnesium alloy
KZ Chong et al.
MATERIALS TRANSACTIONS (2002)
A SEM and EDS insight into the BUL and BUE differences in the turning processes of AA2024 Al-Cu alloy
MS Carrilero et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Share Paper
