Related references
Note: Only part of the references are listed.Two-phase analysis of nano fl uid fl ow within an innovative four-layer microchannel heat exchanger: Focusing on energy ef fi ciency principle
Nima Mazaheri et al.
POWDER TECHNOLOGY (2021)
A combined multi-criterion optimization to determine optimum geometrical parameters for flow of an ecofriendly graphene-based nano fluid inside tube enhanced with twisted conical strip inserts
Mehdi Bahiraei et al.
POWDER TECHNOLOGY (2021)
Experimental exergy analysis of a printed circuit heat exchanger for supercritical carbon dioxide Brayton cycles
Keyong Cheng et al.
APPLIED THERMAL ENGINEERING (2021)
Experimental study on heat transfer, friction factor, entropy and exergy efficiency analyses of a corrugated plate heat exchanger using Ni/water nanofluids
B. Saleh et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)
Modeling of energy efficiency for a solar still fitted with thermoelectric modules by ANFIS and PSO-enhanced neural network: A nanofluid application
Mehdi Bahiraei et al.
POWDER TECHNOLOGY (2021)
Irreversibility characteristics of a modified microchannel heat sink operated with nanofluid considering different shapes of nanoparticles
Mehdi Bahiraei et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Effects of magnetic field on thermo-hydraulic behaviors of magnetic nanofluids in CPU cooling system
Cong Qi et al.
APPLIED THERMAL ENGINEERING (2020)
CFD analysis of second law characteristics for flow of a hybrid biological nanofluid under rotary motion of a twisted tape: Exergy destruction and entropy generation analyses
Mehdi Bahiraei et al.
POWDER TECHNOLOGY (2020)
Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations
Xing Cao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Entropy optimized radiative heat transportation in axisymmetric flow of Williamson nanofluid with activation energy
Muhammad Azam et al.
RESULTS IN PHYSICS (2020)
Shell and tube heat exchanger with new segmental baffles configurations: A comparative experimental investigation
Emad M. S. El-Said et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental study on thermo-hydraulic performance of nanofluids in CPU heat sink with rectangular grooves and cylindrical bugles based on exergy efficiency
Ning Zhao et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Second law analysis of a hybrid nanofluid in tubes equipped with double twisted tape inserts
Mehdi Bahiraei et al.
POWDER TECHNOLOGY (2019)
A comparison of mixed convective heat transfer performance of nanofluids cooled heat sink with circular perforated pin fin
Fatima Zohra Bakhti et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental investigation on pre-heating technology of coal water slurry with different concentration in shell-and-tube heat exchangers with ladder-type fold baffles
Juan Xiao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Experimental study on influences of cylindrical grooves on thermal efficiency, exergy efficiency and entropy generation of CPU cooled by nanofluids
Ning Zhao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Artificial intelligence in the field of nanofluids: A review on applications and potential future directions
Mehdi Bahiraei et al.
POWDER TECHNOLOGY (2019)
Influence of stability and particle shape effects for an entropy generation based optimized selection of magnesia nanofluid for convective heat flow applications
Suseel Jai S. Krishnan et al.
APPLIED SURFACE SCIENCE (2019)
Graphene family nanofluids: A critical review and future research directions
Mehdi Bahiraei et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Entropy generation and exergy destruction in condensing steam flow through turbine blade with surface roughness
Hongbing Ding et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Experimental investigation on thermal-hydraulic performance of a novel shell-and-tube heat exchanger with unilateral ladder type helical baffles
Jian Chen et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental study on the flow and heat transfer characteristics of nanofluids in double-tube heat exchangers based on thermal efficiency assessment
Cong Qi et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Analyzing performance of a ribbed triple-tube heat exchanger operated with graphene nanoplatelets nanofluid based on entropy generation and exergy destruction
Nima Mazaheri et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)
Electronics cooling with nanofluids: A critical review
Mehdi Bahiraei et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Exergy destruction minimization: A principle to convective heat transfer enhancement
W. Liu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Numerical and experimental investigation of the heat exchanger with trapezoidal baffle
Xin Gu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Investigation of nanofluid entropy generation in a heat exchanger with helical twisted tapes
Zhixiong Li et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Performance simulation on unilateral ladder type helical baffle heat exchanger in half cylindrical space
Shifan Yang et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Exergy analysis of a shell-and-tube heat exchanger using graphene oxide nanofluids
Milad Rabbani Esfahani et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)
Nanoparticle shape effects on thermal-hydraulic performance of boehmite alumina nanofluids in a sinusoidal wavy mini-channel with phase shift and variable wavelength
Ali Akbar Abbasian Arani et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Numerical study on impact behavior of nanoparticle shapes on the performance improvement of shell and tube heat exchanger
Hassan Hajabdollahi et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)
Entropy generation in a heat exchanger working with a biological nanofluid considering heterogeneous particle distribution
Mehdi Bahiraei et al.
ADVANCED POWDER TECHNOLOGY (2017)
Effects of geometrical parameters on hydrothermal characteristics of shell-and-tube heat exchanger with helical baffles: Numerical investigation, modeling and optimization
Mandi Saeedan et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
Experimental investigation on performance comparison for shell-and-tube heat exchangers with different baffles
Jian Wen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios
Aggrey Mwesigye et al.
ENERGY (2014)
First and second laws analysis of a minichannel-based solar collector using boehmite alumina nanofluids: Effects of nanoparticle shape and tube materials
Omid Mahian et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Numerical study of influence of nanoparticle shape on the natural convection in Cu-water nanofluid
Eon Hin Ooi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2013)
EXPERIMENTAL AND NUMERICAL STUDIES ON SHELL-SIDE PERFORMANCE OF THREE DIFFERENT SHELL-AND-TUBE HEAT EXCHANGERS WITH HELICAL BAFFLES
Gui-Dong Chen et al.
JOURNAL OF ENHANCED HEAT TRANSFER (2011)
Second-Law Thermodynamic Comparison and Maximal Velocity Ratio Design of Shell-and-Tube Heat Exchangers With Continuous Helical Baffles
Qiu-Wang Wang et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)
Numerical investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles
Qiuwang Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Particle shape effects on thermophysical properties of alumina nanofluids
Elena V. Timofeeva et al.
JOURNAL OF APPLIED PHYSICS (2009)
Numerical and experimental investigation of shellside characteristics for RODbaffle heat exchanger
Q. W. Dong et al.
APPLIED THERMAL ENGINEERING (2008)
Effects of baffle inclination angle on flow and heat transfer of a heat exchanger with helical baffles
Yong-Gang Lei et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2008)
Entropy production calculation for turbulent shear flows and their implementation in cfd codes
F Kock et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2005)
Share Paper
