4.7 Article

Numerical studies of mixing of ellipsoidal particles in a bladed mixer

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

The effect of primary and secondary flows on the homogenization process in a vertical bladed mixer

J. Havlica et al.

Summary: This article focuses on numerical simulations of the granular mixing process in a vertical cylindrical mixer with two opposed flat blades with a 45 degrees rake angle. The study found that the success of the homogenization process depends not only on the system's dynamics, but also on the initial distribution of particles. The different intensities of primary and secondary flows can affect the mutual synergy between movements of particles located on the phase interface, which ultimately impacts the rate and effectiveness of the homogenization process.

POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

GPU-based DEM simulation for scale-up of bladed mixers

Angga Pratama Herman et al.

Summary: This study utilizes GPU-based DEM to investigate particle mixing in bladed mixers at different scales. Results indicate that maintaining geometric similarity while scaling up mixers results in similar mixing quality at the same Froude number, although larger mixers require longer mixing times. Correlations are proposed to predict various parameters as functions of scale-up ratio and Froude number, and a similarity study suggests that maintaining mixing rate produces consistent mixing performance across all mixer sizes.

POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

DEM study on the packing density and randomness for packing of ellipsoids

Jieqing Gan et al.

POWDER TECHNOLOGY (2020)

Article Engineering, Chemical

A Discrete Element Method Study of Monodisperse Mixing of Ellipsoidal Particles in a Rotating Drum

Siyuan He et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Engineering, Chemical

Particle shape-induced radial segregation of binary mixtures in a rotating drum

S. Y. He et al.

POWDER TECHNOLOGY (2019)

Article Engineering, Chemical

Granular dynamics in a vertical bladed mixer: Secondary flow patterns

J. Havlica et al.

POWDER TECHNOLOGY (2019)

Article Engineering, Chemical

Flow regimes of cohesionless ellipsoidal particles in a rotating drum

S. Y. He et al.

POWDER TECHNOLOGY (2019)

Article Engineering, Chemical

Radial segregation of binary-sized ellipsoids in a rotating drum

S. Y. He et al.

POWDER TECHNOLOGY (2019)

Article Engineering, Chemical

Large-scale GPU based DEM modeling of mixing using irregularly shaped particles

Nicolin Govender et al.

ADVANCED POWDER TECHNOLOGY (2018)

Article Engineering, Chemical

Discrete Element Modeling (DEM) for mixing of cohesive solids in rotating cylinders

M. Sebastian Escotet-Espinoza et al.

POWDER TECHNOLOGY (2018)

Article Engineering, Chemical

CFD-DEM Modeling of Gas Fluidization of Fine Ellipsoidal Particles

Jieqing Gan et al.

AICHE JOURNAL (2016)

Article Engineering, Chemical

DEM simulation on the packing of fine ellipsoids

J. Q. Gan et al.

CHEMICAL ENGINEERING SCIENCE (2016)

Article Engineering, Chemical

Particle scale study of heat transfer in packed and fluidized beds of ellipsoidal particles

Jieqing Gan et al.

CHEMICAL ENGINEERING SCIENCE (2016)

Article Engineering, Chemical

The effect of the number of impeller blades on granular flow in a bladed mixer

Veerakiet Boonkanokwong et al.

POWDER TECHNOLOGY (2016)

Article Engineering, Chemical

A GPU-based DEM approach for modelling of particulate systems

J. Q. Gan et al.

POWDER TECHNOLOGY (2016)

Article Engineering, Chemical

Flow and Mixing of Cohesive Particles in a Vertical Bladed Mixer

Rohana Chandratilleke et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Materials Science, Multidisciplinary

The effect of liquids on radial segregation of granular mixtures in rotating drums

P. Y. Liu et al.

GRANULAR MATTER (2013)

Article Engineering, Chemical

A particle-scale index in the quantification of mixing of particles

G. R. Chandratilleke et al.

AICHE JOURNAL (2012)

Article Engineering, Chemical

A DEM study of the mixing of particles induced by a flat blade

G. R. Chandratilleke et al.

CHEMICAL ENGINEERING SCIENCE (2012)

Article Engineering, Chemical

Discrete particle simulation of gas fluidization of ellipsoidal particles

Z. Y. Zhou et al.

CHEMICAL ENGINEERING SCIENCE (2011)

Article Engineering, Chemical

Polydisperse granular flows in a bladed mixer: Experiments and simulations of cohesionless spheres

Brenda Remy et al.

CHEMICAL ENGINEERING SCIENCE (2011)

Article Engineering, Chemical

Experiments and simulations of cohesionless particles with varying roughness in a bladed mixer

Brenda Remy et al.

CHEMICAL ENGINEERING SCIENCE (2010)

Article Engineering, Chemical

Effect of Blade Speed on Granular Flow and Mixing in a Cylindrical Mixer

G. R. Chandratilleke et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Article Engineering, Chemical

Effects of blade rake angle and gap on particle mixing in a cylindrical mixer

G. R. Chandratilleke et al.

POWDER TECHNOLOGY (2009)

Article Engineering, Chemical

Characterization of granular flow of wet solids in a bladed mixer

Azzeddine Lekhal et al.

AICHE JOURNAL (2006)

Article Engineering, Chemical

Microdynamic analysis of the particle flow in a cylindrical bladed mixer

YC Zhou et al.

CHEMICAL ENGINEERING SCIENCE (2004)

Article Engineering, Chemical

Simulated and measured flow of granules in a bladed mixer - a detailed comparison

RL Stewart et al.

CHEMICAL ENGINEERING SCIENCE (2001)

Article Physics, Fluids & Plasmas

Numerical investigation of the angle of repose of monosized spheres

YC Zhou et al.

PHYSICAL REVIEW E (2001)

Article Engineering, Chemical

Prediction of impeller torque in high shear powder mixers

PC Knight et al.

CHEMICAL ENGINEERING SCIENCE (2001)

Article Engineering, Chemical

Granular flow over a flat-bladed stirrer

RL Stewart et al.

CHEMICAL ENGINEERING SCIENCE (2001)