Related references
Note: Only part of the references are listed.An Investigation into the Mechanical and Wear Characteristics of Hybrid Composites: Influence of Different Types and Content of Biodegradable Reinforcements
K. R. Sumesh et al.
JOURNAL OF NATURAL FIBERS (2022)
Characterization of industrial discarded novel Cymbopogon flexuosus stem fiber: A potential replacement for synthetic fiber
S. Raja et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Mechanical, water absorption and wear characteristics of novel polymeric composites: Impact of hybrid natural fibers and oil cake filler addition
K. R. Sumesh et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Multi Response Optimization on Machinability of SiC Waste Fillers Reinforced Polymer Matrix Composite Using Taguchi's Coupled Grey Relational Analysis
V Kavimani et al.
SILICON (2022)
Characterization studies on Calotropis procera fibers and their performance as reinforcements in epoxy matrix
K. Yoganandam et al.
JOURNAL OF NATURAL FIBERS (2020)
The potential application of cereal straw as a bio-filler for elastomer composites
Marcin Maslowski et al.
POLYMER BULLETIN (2020)
Characterization of a new cellulosic natural fiber extracted from the root of Ficus religiosa tree
A. Arul Marcel Moshi et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Perspective on the mechanical response of pineapple leaf filler/toughened epoxy composites under diverse constraints
Rahul Kumar et al.
POLYMER BULLETIN (2020)
Synthesis and characterization of amorphous mesoporous silica from palm kernel shell ash
Patrick E. Imoisili et al.
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO (2020)
The use of alkali treated walnut shells as filler in plasticized poly(lactic acid) matrix composites
Ander Orue et al.
INDUSTRIAL CROPS AND PRODUCTS (2020)
Effects of matrix modification on mechanical and durability characteristics of polymer composites through variations in micro fillers, macro fillers and fibers
P. V. Chandrasekhara Rao
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effects of Various Methods of Chemical Modification of Lignocellulose Hazelnut Shell Waste on a Newly Synthesized Bio-based Epoxy Composite
Suheyla Kocaman et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)
Mercerizing Extraction and Physicochemical Characterizations of Lignocellulosic Fiber from the Leaf Waste of Mikania micrantha Kunth ex HBK
Chaw Jiang Lim et al.
JOURNAL OF NATURAL FIBERS (2020)
Influence of fly ash nano filler on the tensile and flexural properties of novel hybrid epoxy nano-composites
Ajmeera Ramesh et al.
MATERIALS TODAY-PROCEEDINGS (2020)
The role of silica-containing agro-industrial waste as reinforcement on physicochemical and thermal properties of polymer composites
Samsul Rizal et al.
HELIYON (2020)
Analysis of Mechanical Properties of Jute Epoxy Composite with Cenosphere Filler
Subhendu Nath et al.
SILICON (2019)
Comprehensive characterization of natural cellulosic fiber from Coccinia grandis stem
S. Garette Jebadurai et al.
CARBOHYDRATE POLYMERS (2019)
Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
R. Vijay et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Cork-wood hybrid filler system for polypropylene and poly(lactic acid) based injection molded composites. Structure evaluation and mechanical performance
Jacek Andrzejewski et al.
COMPOSITES PART B-ENGINEERING (2019)
Characterization of new cellulosic fiber: Dracaena reflexa as a reinforcement for polymer composite structures
P. Manimaran et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Characterization of cellulose fibers in Thespesia populnea barks: Influence of alkali treatment
M. Kathirselvam et al.
CARBOHYDRATE POLYMERS (2019)
Characterization of silane treated and untreated natural cellulosic fibre from corn stalk waste as potential reinforcement in polymer composites
Yucheng Liu et al.
CARBOHYDRATE POLYMERS (2019)
Mechanical and morphological characterization of carbonized egg-shell fillers/Borassus fibre reinforced polyester hybrid composites
Anil Baby et al.
MATERIALS RESEARCH EXPRESS (2019)
Characterization of raw and alkali treated new natural cellulosic fibres extracted from the aerial roots of banyan tree
T. Ganapathy et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Experimental correlation between the production parameter and mechanical properties of functional epoxy-cow bone particulate composites
A. D. Omah et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Novel epoxy-carbonized coconut shell nanoparticles composites for car bumper application
J. O. Agunsoye et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Sustainable Use of Coffee Husks For Reinforcing Polyethylene Composites
Lang Huang et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Industrial Lime Sludge waste-HDPE composites a study of their mechanical, thermal, and morphological properties
Satadru Kashyap et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)
Bagasse composites: A review of material preparation, attributes, and affecting factors
Wei Xiong
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)
Investigations on mechanical and tribological properties of Al-Si10-Mg alloy/sugarcane bagasse ash particulate composites
S. Shankar et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2018)
Influence of redmud particle hybridization in banana/sisal and sisal/glass composites
V. Arumuga Prabu et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2018)
An experimental investigation and optimization on the impact strength of kenaf fiber biocomposite: application of response surface methodology
Hessameddin Yaghoobi et al.
POLYMER BULLETIN (2018)
Characterization of New Natural Cellulosic Fiber from the Bark of Dichrostachys Cinerea
P. G. Baskaran et al.
JOURNAL OF NATURAL FIBERS (2018)
Physicochemical, tensile, and thermal characterization of new natural cellulosic fibers from the stems of Sida cordifolia
P. Manimaran et al.
JOURNAL OF NATURAL FIBERS (2018)
ThermoMechanical Characterization of Calotropis gigantea Stem Powder-Filled Jute Fiber-Reinforced Epoxy Composites
A. Vinod et al.
JOURNAL OF NATURAL FIBERS (2018)
Synthesis of nano-crystalline forsterite (Mg2SiO4) powder from biomass rice husk silica by solid-state route
Lakshya Mathur et al.
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO (2018)
Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis. L
P. Senthamaraikannan et al.
CARBOHYDRATE POLYMERS (2018)
Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications
P. Manimaran et al.
CARBOHYDRATE POLYMERS (2018)
Investigation of mechanical, microstructure, and wear behaviors of Al-12%Si/reinforced with melon shell ash particulates
I. Y. Suleiman et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Mechanical properties and characterization of zirconium oxide (ZrO2) and coconut shell ash(CSA) reinforced aluminium (Al 6082) matrix hybrid composite
K. Ravi Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Characterization and properties of natural fiber polymer composites: A comprehensive review
M. R. Sanjay et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Turning waste to wealth: A direct process for recovery of nano-silica and lignin from paddy straw agro-waste
Baljinder Singh Kauldhar et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Potential utilization of rubberwood flour and sludge waste from natural rubber manufacturing process as reinforcement in plastic composites
Chatree Homkhiew et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2018)
Structural and Mechanical Properties of Zr-Si-N Coatings Deposited by Arc Evaporation at Different Substrate Bias Voltages
B. Warcholinski et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Characterization of industrial discarded fruit wastes (Tamarindus Indica L.) as potential alternate for man-made vitreous fiber in polymer composites
J. S. Binoj et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Feasibility study on the use of carbonized cassava cortex as reinforcement in polymer-matrix composites
Augustine Dinobi Omah et al.
COGENT ENGINEERING (2018)
Rice husk/rice husk ash as an alternative source of silica in ceramics: A review
S. K. S. Hossain et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2018)
Comprehensive characterization of industrially discarded fruit fiber, Tamarindus indica L. as a potential eco-friendly bio-reinforcement for polymer composite
J. S. Binoj et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Comparison on mechanical properties of lignocellulosic flour epoxy composites prepared by using coconut shell, rice husk and teakwood as fillers
S. Sajith et al.
POLYMER TESTING (2017)
Structure of CrON coatings formed in vacuum arc plasma fluxes
B. Warcholinski et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Microstructure and mechanical properties of aluminium metal matrix composites with addition of bamboo leaf ash by stir casting method
B. Praveen Kumar et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Green Synthesis and Characterization of Biosilica Produced from Sugarcane Waste Ash
Rodrigo Heleno Alves et al.
JOURNAL OF CHEMISTRY (2017)
Incorporation of coconut shell based nanoparticles in kenaf/coconut fibres reinforced vinyl ester composites
Abdul H. P. S. Khalil et al.
MATERIALS RESEARCH EXPRESS (2017)
A lucrative chemical processing of bamboo leaf biomass to synthesize biocompatible amorphous silica nanoparticles of biomedical importance
Suriyaprabha Rangaraj et al.
APPLIED NANOSCIENCE (2017)
The analysis of composite properties reinforced with particles from palm oil industry waste produced by casting methods
Tugiman et al.
10TH INTERNATIONAL SEMINAR ON INDUSTRIAL ENGINEERING AND MANAGEMENT: SUSTAINABLE DEVELOPMENT IN INDUSTRY AND MANAGEMENT (2017)
Natural hemp fiber reinforced polybenzoxazine composites: Curing behavior, mechanical and thermal properties
Abdul Qadeer Dayo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Influence of rice husk ash particles on microstructure and tensile behavior of AA6061 aluminum matrix composites produced using friction stir processing
Isaac Dinaharan et al.
COMPOSITES COMMUNICATIONS (2017)
Influence of Organic Fillers on Physicochemical and Mechanical Properties of Unsaturated Polyester Composites
S. O. Adeosun et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2016)
Characterization of new natural cellulosic fiber from the Perotis indica plant
M. Prithiviraj et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)
Novel eco-friendly commingled polypropylene/banana fiber composite: studies on thermal and mechanical properties
Arya Anil et al.
POLYMER BULLETIN (2016)
Characterization of waste eggshells and CaCO3 reinforced AA2014 green metal matrix composites: A green approach in the synthesis of composites
Shashi Prakash Dwivedi et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Characterization of new natural cellulosic fiber from Cissus quadrangularis stem
S. Indran et al.
CARBOHYDRATE POLYMERS (2015)
Mechanical and Thermal Properties of Epoxy Composites Reinforced with Waste Peanut Shell Powder as a Bio-filler
M. N. Prabhakar et al.
FIBERS AND POLYMERS (2015)
Extraction and physical characterization of amorphous silica made from corn cob ash at variable pH conditions via sol gel processing
Jaehong Shim et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)
Mechanical Properties of Hybrid Lignocellulosic Fiber-Filled Acrylonitrile Butadiene Styrene (ABS) Biocomposites
Venkata S. Chevali et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2015)
Characterization of new natural cellulosic fiber from Cissus quadrangularis root
S. Indran et al.
CARBOHYDRATE POLYMERS (2014)
Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites
V. Arumuga Prabu et al.
MATERIALS & DESIGN (2014)
Study on mechanical properties of fly ash impregnated glass fiber reinforced polymer composites using mixture design analysis
R. Satheesh Raja et al.
MATERIALS & DESIGN (2014)
Characterization of Rice Hull Ash and Its Performance in Turbidity Removal From Water
F. V. Adams et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2014)
Lignocellulosic byproducts as filler in polypropylene: Comprehensive study on the effects of compatibilization and loading
Michael A. Fuqua et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Development and Application of Green Composites: Using Coffee Ground and Bamboo Flour
Bong-San Baek et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2013)
Characterization and biodegradability of agricultural residue-filled polyester ecocomposites
Fu-San Yen et al.
POLYMER BULLETIN (2013)
Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites
Kenneth Kanayo Alaneme et al.
Journal of Materials Research and Technology-JMR&T (2013)
Effect of oxide and carbide nanoparticles on tribological properties of phenolic-based nanocomposites
Morteza Atarian et al.
IRANIAN POLYMER JOURNAL (2012)
Utilization of coconut shell powder as a novel filler in natural rubber
C. Sareena et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Effect of bagasse ash reinforcement on dry sliding wear behaviour of polymer matrix composites
V. S. Aigbodion et al.
MATERIALS & DESIGN (2012)
Effects of breadfruit seed hull ash on the microstructures and properties of Al-Si-Fe alloy/breadfruit seed hull ash particulate composites
C. U. Atuanya et al.
RESULTS IN PHYSICS (2012)
Potential of using coconut shell particle fillers in eco-composite materials
J. Sarki et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Effects of Filler Content and Compatibilizing Agents on Mechanical Behavior of the Particle-Reinforced Composites
Amir Nourbakhsh et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2011)
Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite
Nadir Ayrilmis et al.
JOURNAL OF MATERIALS SCIENCE (2010)
A Comparative Study on Different Ceramic Fillers Affecting Mechanical Properties of Glass-Polyester Composites
Amar Patnaik et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)