4.7 Article

Simulation and optimization of green organic light emitting diode based on TiO2/Ag/MoO3 multilayer electrode

Journal

OPTICS AND LASER TECHNOLOGY
Volume 143, Issue -, Pages -

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.optlastec.2021.107290

Keywords

Dielectric/Metal/Dielectric; Transparent conductor electrode; Organic light-emitting diode; Cavity resonant; Output light intensity peak

Ask authors/readers for more resources

This study investigates the multilayer features of TiO2/Ag/MoO3 (TAM) as an alternative transparent conductor structure, analyzing the effects of different layer thicknesses on electro-optical characteristics and designing an optimal structure. By studying the impact of layer thickness variation on OLED device output, it is shown that output light intensity, spectrum, and wavelength can be tuned by adjusting each layer's thickness. Ultimately, an optimized TAM-based OLED structure is proposed, with superior performance compared to ITO-based devices, showcasing lower turn-on voltage, higher luminance intensity, current efficiency and power efficiency.
In this paper, first, multilayer features of TiO2/Ag/MoO3 (TAM) are investigated as a transparent conductor structure alternative to Indium Tin Oxide (ITO) electrodes. Thickness effects on the electro-optical features are investigated and an optimal structure is designed. A maximum figure of merit (FOM) of 1.2 x 10(-2) (Omega(-1)) was calculated for a asymmetric TiO2(45 nm)/Ag(10 nm)/MoO3(40 nm) multilayer. By considering an Organic Light Emitting Diode (OLED) based on TAM trilayer electrode with TiO2/Ag/MoO3/TPD (N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine)/Alq(3) (tris(8-hydroxyquinolinato) aluminum)/Al, the effect of variation in different layers thickness on OLED device are studied. Different output features are investigated using thin-film optics and OLEDs optical models based on microcavity and interference effects. The results showed that it is possible to tune output light, intensity, spectrum width, and the wavelength for intensity peak with respect to each of the layers thickness. Finally, the ultimate structure of such device based on TAM is suggested to be TiO2(45 nm)/Ag(10 nm)/MoO3(10 nm)/TPD(40 nm)/Alq(3)(50 nm)/Al, in which the optimal emission zone is located at the interface between the emitting and hole-transporting layers. Finally, the TAM-based OLED with optimized structure and OLED with ITO electrode were fabricated to compare and evaluate the results obtained from the simulation. The results show that OLED prepared on TAM anode has lower turn-on voltage, higher luminance intensity, higher current efficiency and higher power efficiency compared to the ITO-based device.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available