4.6 Article

Synthesis and Characterization of an Fe/Co Ferrite Spinel Oxide Film Produced by Using N2/Steam Heat Treatment on Two Maraging Steels

Related references

Note: Only part of the references are listed.
Article Chemistry, Inorganic & Nuclear

Microstructural characterization of grade 300 and grade 350 maraging steels and electrochemical study in hydrofluoric solution

Mauro Andres Cerra Florez et al.

Summary: The electrochemical behavior of solution-annealed grade 300 and grade 350 maraging steels subjected to different aging temperatures in aqueous hydrofluoric acid medium was evaluated. The study showed the effects of chemical composition and heat treatments on material properties, with intermetallic composites deposited during aging significantly increasing hardness but reduced when aged at high temperatures where reverted austenite was formed. Results indicated that solution-annealed samples exhibited better corrosion resistance than aged samples, and higher amounts of cobalt and titanium in grade 350 maraging steel improved mechanical properties but decreased corrosion resistance.

JOURNAL OF FLUORINE CHEMISTRY (2021)

Article Materials Science, Multidisciplinary

Characterization Study of an Oxide Film Layer Produced under CO2/Steam Atmospheres on Two Different Maraging Steel Grades

Mauro Andres Cerra Florez et al.

Summary: The experimental work investigated the oxide layer generated under different atmospheres during the thermal aging treatment of two different maraging grades, revealing that the majority of the oxide layer is composed of compounds like TiO2, MoO3, hematite, and CoFe2O4, with the latter being distributed homogeneously throughout the layer. Additionally, a nickel-rich austenitic phase at the interphase was mainly composed of cobalt ions (Co2+), showing a different composition within the spinel lattice than expected.

METALS (2021)

Article Materials Science, Coatings & Films

Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD

Yingyi Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Engineering, Environmental

Simple electrodeposition of MoO3 film on carbon cloth for high-performance aqueous symmetric supercapacitors

Nan Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Materials Science, Multidisciplinary

Nanosized CoFe2O4-graphene nanoplatelets with massive dielectric enhancement for high frequency device application

Krutika L. Routray et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Article Chemistry, Physical

The effect of prior austenite grain size on hydrogen embrittlement of Co-containing 18Ni 300 maraging steel

Marcelo J. Gomes da Silva et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Nanoscience & Nanotechnology

Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel

F. F. Conde et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Chemistry, Inorganic & Nuclear

Starch functionalized magnetite nanoparticles: New insight into the structural and magnetic properties

Mbolantenaina Rakotomalala Robinson et al.

JOURNAL OF SOLID STATE CHEMISTRY (2019)

Article Engineering, Mechanical

EBSD study of early fractured phenomena in a 350 grade Maraging steel elbows exposed to hydrofluoric acid

Mohammad Masoumi et al.

ENGINEERING FAILURE ANALYSIS (2019)

Article Materials Science, Multidisciplinary

Analysis of titanium nitrides precipitated during medium carbon steels solidification

Constantino Capurro et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

Article Materials Science, Multidisciplinary

Influence of Solution Annealing on Microstructure and Mechanical Properties of Maraging 300 Steel

Venceslau Xavier Lima Filho et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)

Article Chemistry, Physical

Self-organized single crystal mixed magnetite/cobalt ferrite films grown by infrared pulsed-laser deposition

Juan de la Figuera et al.

APPLIED SURFACE SCIENCE (2015)

Article Materials Science, Multidisciplinary

Hydrogen embrittlement of ultra high strength 300 grade maraging steel

L. P. M. Santos et al.

CORROSION SCIENCE (2015)

Article Materials Science, Multidisciplinary

Nanoferrites of nickel doped with cobalt: Influence of Co2+ on the structural and magnetic properties

A. P. G. Rodrigues et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)

Article Nanoscience & Nanotechnology

Addressing the issue of precipitates in maraging steels - Unambiguous answer

O. Moshka et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Materials Science, Multidisciplinary

Adsorption and incorporation of transition metals at the magnetite Fe3O4(001) surface

Roland Bliem et al.

PHYSICAL REVIEW B (2015)

Article Electrochemistry

High capacity and low cost spinel Fe3O4 for the Na-ion battery negative electrode materials

P. Ramesh Kumar et al.

ELECTROCHIMICA ACTA (2014)

Article Engineering, Aerospace

Microstructural Analysis of Co-Free Maraging Steel Aged

Aline Castilho Rodrigues et al.

JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT (2014)

Article Engineering, Industrial

A non-contact 3D method to characterize the surface roughness of castings

U. C. Nwaogu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)

Article Chemistry, Physical

Atomistic Insights into Early Stage Oxidation and Nanoscale Oxide Growth on Fe(100), Fe(111) and Fe(110) Surfaces

Ram Subbaraman et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Article Chemistry, Physical

Nanoscale oxidation and complex oxide growth on single crystal iron surfaces and external electric field effects

Byoungseon Jeon et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Article Metallurgy & Metallurgical Engineering

The variant selection in the transformation from austenite to martensite in samples of maraging-350 steel

Neuman Fontenele Viana et al.

Journal of Materials Research and Technology-JMR&T (2013)

Article Metallurgy & Metallurgical Engineering

Oxidation behavior of Kovar alloy in controlled atmosphere

D LUO et al.

Acta Metallurgica Sinica-English Letters (2009)

Article Materials Science, Multidisciplinary

Microstructural characterization of the HAZ in AISI 444 ferritic stainless steel welds

Cleiton C. Silva et al.

MATERIALS CHARACTERIZATION (2008)

Article Chemistry, Multidisciplinary

Synthesis and characterization of Fe-Fe2O3 core-shell nanowires and nanonecklaces

Lirong Lu et al.

CRYSTAL GROWTH & DESIGN (2007)

Article Instruments & Instrumentation

WSXM: A software for scanning probe microscopy and a tool for nanotechnology

I. Horcas et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2007)

Article Chemistry, Physical

Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds

AP Grosvenor et al.

SURFACE AND INTERFACE ANALYSIS (2004)

Article Engineering, Industrial

Roughness parameters

ES Gadelmawla et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

Article Materials Science, Multidisciplinary

Microwave applications of soft ferrites

M Pardavi-Horvath

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2000)