☆ 4.7 Article

Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

A new type of two-supply, one-return, triple pipe-structured heat loss model based on a low temperature district heating system

Qian Xu et al.

Summary: This paper proposes a new TOTS arrangement method for district heating systems based on the design concept of a fourth-generation smart pipe network system. The created analytical and numerical models have high accuracy in predicting heat loss, with a deviation within 2% compared to experimental data. The distance between heating pipes is found to be a crucial factor affecting total heat loss and heat exchange in the new multi-control heating system.

ENERGY (2021)

Add to Collection

Article Engineering, Civil

Diversified Technologies in Internet of Vehicles Under Intelligent Edge Computing

Zhihan Lv et al.

Summary: By combining intelligent edge computing and IoT technologies, an optimized model for vehicle computational task offloading and migration is proposed, showing superiority in transmission delay, energy consumption, and task completion time compared to other schemes.

IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS (2021)

Add to Collection

Article Acoustics

Design and Fabrication of a Novel Dual-Frequency Confocal Ultrasound Transducer for Microvessels Super-Harmonic Imaging

Xinqi Deng et al.

Summary: A dual-frequency confocal ultrasound transducer has been successfully developed in this study, utilizing special composite materials and a confocal structure to address acoustic issues in microvascular imaging. Experimental results demonstrate that this ultrasound transducer is potentially applicable for future medical imaging of microvessels.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

An integrated control algorithm of power distribution for islanded microgrid based on improved virtual synchronous generator

Liang Zhang et al.

Summary: This paper proposes an improved algorithm for virtual synchronous generator control in islanded microgrid with multiple inverters, which eliminates the resistive component of line impedance, achieves real-time adjustment of active and reactive power, and improves power distribution accuracy and dynamic performance while maintaining system stability.

IET RENEWABLE POWER GENERATION (2021)

Add to Collection

Article Engineering, Civil

Crop evapotranspiration prediction by considering dynamic change of crop coefficient and the precipitation effect in back-propagation neural network model

Xin Han et al.

Summary: The paper discusses the application of the back-propagation neural network (BP) model in predicting crop evapotranspiration (ETc), showing superior performance compared to multiple linear regression techniques, especially when considering the dynamic change of crop coefficient (Kc) and the effect of precipitation. The results provide valuable insights for improving water management during crop production.

JOURNAL OF HYDROLOGY (2021)

Add to Collection

Article Engineering, Mechanical

On the local/nonlocal piezoelectric nanobeams: Vibration, buckling, and energy harvesting

Ali Naderi et al.

Summary: In this study, the vibration, buckling, and energy harvesting of piezoelectric nanobeams are investigated using a paradox-free nonlocal theory called two-phase local/nonlocal elasticity. The exact solution and a numerical solution are obtained using the governing equations derived from the two-phase elasticity and Hamilton's principle. A comparison study with common differential nonlocal elasticity shows that differential nonlocal theory is incompetent for reliable results in studying piezoelectric-based materials. This study suggests using other nonlocal theories like two-phase local/nonlocal elasticity for analyzing the mechanics of piezoelectric nanostructures.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Geological

Thermomechanical Soil-Structure Interaction in Single Energy Piles Exhibiting Reversible Interface Behavior

Arash Saeidi Rashk Olia et al.

Summary: Analytical solutions for displacement, strain, and stress in energy piles provide a rational understanding of the thermomechanical load transfer mechanism, with results showing the thermal null point location is dependent on pile geometry and stiffness, shifting upward with an increase in the ratio of head and tip restraints. Furthermore, formation of tension zones in energy piles is likely for various loading scenarios, with the length of the tension zone influenced by pile geometry, soil and pile stiffness ratio, and thermal load magnitude. Additionally, the magnitude of net cooling combined with a constant compressive axial force increases tension zone length and tensile stress magnitude in the pile, while an increase in heating decreases these factors with constant tensile axial force.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2021)

Add to Collection

Article Optics

Generalized framework for non-sinusoidal fringe analysis using deep learning

Shijie Feng et al.

Summary: The study introduces a deep learning technique to analyze fringe images resulting from various non-sinusoidal factors and even their coupling. By training deep neural networks, it effectively suppresses phase errors caused by different types of non-sinusoidal patterns.

PHOTONICS RESEARCH (2021)

Add to Collection

Article

Well logging curve reconstruction based on kernel ridge regression

Pengpeng Fan et al.

Arabian Journal of Geosciences (2021)

Add to Collection

Article Mechanics

Low-velocity impact, resonance, and frequency responses of FG-GPLRC viscoelastic doubly curved panel

Liang Zhang et al.

Summary: This article focuses on forced vibration and low-velocity impact analysis of functionally graded graphene nanoplatelets reinforced composite doubly curved panels. Various models and theories are used to obtain material properties and conduct numerical simulations to investigate the influence of different parameters on the structure.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Electromagnetic absorption of copper fiber oriented composite using 3D printing

Junbo Sun et al.

Summary: In this study, the impact of 3D-printed oriented copper fiber on EMW superstructures and microwave reflectivity was investigated. An equivalent waveguide attenuator model was proposed to explain the enhanced dielectric properties, space impedance matching, and multiple scattering. EMW-absorbing elements were manufactured through casting, laminar parallel printing, and cross printing, with the cross superstructure showing excellent low-frequency absorption and the parallel superstructure demonstrating desirable reflectivity at high frequencies.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Physics, Multidisciplinary

A Fault Diagnosis Method Considering Meteorological Factors for Transmission Networks Based on P Systems

Xiaotian Chen et al.

Summary: This paper proposes a fault diagnosis method for transmission networks considering meteorological factors. By designing a spiking neural P system and matrix reasoning algorithm, and establishing a diagnosis model for each suspicious fault transmission line, diagnosis results are obtained through parallel execution of the algorithm, showing the feasibility and effectiveness of the proposed method on the IEEE 39-bus system.

ENTROPY (2021)

Add to Collection

Article Electrochemistry

Facile Synthesis of Co9S8 Nanocages as an Electrochemical Sensor for Luteolin Detection

Hao Cheng et al.

Summary: A novel Co9S8 nanocage was successfully fabricated and utilized as an efficient sensing platform for detection of luteolin, showing significant electrocatalytic activity and improved electrochemical response. The sensor exhibited excellent linear relationship, wide detection range (0.01-20 mu M), low detection limit (0.8 nM), good repeatability, reproducibility, and selectivity, as well as simplicity and low cost for accurate and precise determination of luteolin in actual samples.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Engineering, Mechanical

Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system

Yuan Guo et al.

Summary: This research investigates the electrically performance, vibration/resonance characteristics, low-velocity impact, and absorbed energy of piezoelectric doubly curved panel on a viscoelastic substrate. Various factors such as applied voltage, elastic parameter, circumferential wave number, and impactor velocity were analyzed to determine the influence on the structure's performance. The study concluded that a curvature ratio of more than 3.8 is necessary for stability, and an increase in impactor velocity leads to improved absorbed energy in the panel.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Review Optics

Calibration of fringe projection profilometry: A comparative review

Shijie Feng et al.

Summary: In this work, a review of some of the most commonly used calibration methods in fringe projection profilometry is presented. The study covers basic principles, advantages, limitations, and factors affecting the performance of calibration methods. Quantitative and qualitative comparative experiments are used to showcase the advantages and suitability of each method.

OPTICS AND LASERS IN ENGINEERING (2021)

Add to Collection

Article Multidisciplinary Sciences

Lead halide perovskite for efficient optoacoustic conversion and application toward high-resolution ultrasound imaging

Xinyuan Du et al.

Summary: Lead halide perovskites have shown promising applications in optoacoustic transducers with improved thermal properties and high performance. By optimizing the thermal properties of perovskites, the researchers achieved record values for bandwidth and conversion efficiency in optoacoustic transducers.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Fault Diagnosis for Electro-Mechanical Actuators Based on STL-HSTA-GRU and SM

Xiaoyu Zhang et al.

Summary: In this study, a novel algorithm combining HSTA-GRU and STL is proposed to predict multiple time-series data for enhanced fault diagnosis of EMAs. By extracting seasonal factors and capturing spatio-temporal relationships among multivariate EMA sensors, the algorithm improves time series prediction and fault classification efficiency.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Add to Collection

Article Engineering, Mechanical

Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator

Ali Shokrgozar et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Engineering, Multidisciplinary

Free vibration and buckling analyses of magneto-electro-elastic FGM nanoplates based on nonlocal modified higher-order sinusoidal shear deformation theory

Krzysztof Kamil Zur et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Automation & Control Systems

Fuzzy adaptive two-bits-triggered control for nonlinear uncertain system with input saturation and output constraint

Zicong Chen et al.

INTERNATIONAL JOURNAL OF ADAPTIVE CONTROL AND SIGNAL PROCESSING (2020)

Add to Collection

Article Acoustics

Forced vibration analysis of Timoshenko double-beam system under compressive axial load by means of Green's functions

X. Zhao et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Add to Collection

Article Physics, Multidisciplinary

Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer

Erfan Shamsaddini Iori et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2020)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Fractional-order modeling and nonlinear dynamic analyses of the rotor-bearing-seal system

Donglin Yan et al.

CHAOS SOLITONS & FRACTALS (2020)

Add to Collection

Article Mechanics

On frequency response of porous functionally graded magneto-electro-elastic circular and annular plates with different electro-magnetic conditions using HSDT

M. Vinyas

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Multidisciplinary

On the effect of viscoelasticity on behavior of gyroscopes

Shahriar Dastjerdi et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2020)

Add to Collection

Article Engineering, Civil

Frequency characteristics of FG-GPLRC viscoelastic thick annular plate with the aid of GDQM

Mehran Safarpour et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A rough set-based bio-inspired fault diagnosis method for electrical substations

Tao Wang et al.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2020)

Add to Collection

Article Environmental Sciences

Matching Model of Energy Supply and Demand of the Integrated Energy System in Coastal Areas

Xuejiao Zhao et al.

JOURNAL OF COASTAL RESEARCH (2020)

Add to Collection

Article Acoustics

Analytical solutions of nonlocal coupled thermoelastic forced vibrations of micro-/nano-beams by means of Green's functions

X. Zhao et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Add to Collection

Article Engineering, Mechanical

The vibration of two-dimensional imperfect functionally graded (2D-FG) porous rotating nanobeams based on general nonlocal theory

A. Rahmani et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Development of 340-GHz Transceiver Front End Based on GaAs Monolithic Integration Technology for THz Active Imaging Array

Yang Liu et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Automation & Control Systems

Adaptive Estimated Inverse Output-Feedback Quantized Control for Piezoelectric Positioning Stage

Xiuyu Zhang et al.

IEEE TRANSACTIONS ON CYBERNETICS (2019)

Add to Collection

Article Mechanics

Hygrothermal mechanical behaviors of a porous FG-CRC annular plate with variable thickness considering aggregation of CNTs

Ting Dai et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Nonlinear vibration analysis of multiscale doubly curved piezoelectric composite shell in hygrothermal environment

Mahsa Karimiasl et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Free vibration analysis of laminated and FGM composite annular sector plates

Omer Civalek et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

NURBS-based postbuckling analysis of functionally graded carbon nanotube-reinforced composite shells

Tan N. Nguyen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

Add to Collection

Article Mechanics

Buckling and Frequency Responses of a Graphene Nanoplatelet Reinforced Composite Microdisk

H. Moayedi et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A modified nonlocal couple stress-based beam model for vibration analysis of higher-order FG nanobeams

Farzad Ebrahimi et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Nonlinear damping in nonlinear vibrations of rectangular plates: Derivation from viscoelasticity and experimental validation

Marco Amabili

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Add to Collection

Article Engineering, Mechanical

Identification of the viscoelastic response and nonlinear damping of a rubber plate in nonlinear vibration regime

Prabakaran Balasubramanian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Physics, Condensed Matter

A general higher-order nonlocal couple stress based beam model for vibration analysis of porous nanocrystalline nanobeams

Farzad Ebrahimi et al.

SUPERLATTICES AND MICROSTRUCTURES (2017)

Add to Collection

Article Engineering, Multidisciplinary

A novel three-variable shear deformation plate formulation: Theory and Isogeometric implementation

Tuan N. Nguyen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Bubble-Sheet-Like Interface Design with an Ultrastable Solid Electrolyte Layer for High-Performance Dual-Ion Batteries

Panpan Qin et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Engineering, Multidisciplinary

A refined quasi-3D isogeometric analysis for functionally graded microplates based on the modified couple stress theory

Hoang X. Nguyen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Free vibration analysis of embedded magneto-electro-thermo-elastic cylindrical nanoshell based on the modified couple stress theory

Majid Ghadiri et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)

Add to Collection

Article Acoustics

Nonlinear vibrations of viscoelastic rectangular plates

Marco Amabili

JOURNAL OF SOUND AND VIBRATION (2016)

Add to Collection

Review Mechanics

Strong Formulation Finite Element Method Based on Differential Quadrature: A Survey

Francesco Tornabene et al.

APPLIED MECHANICS REVIEWS (2015)

Add to Collection

Article Mechanics

Free vibration analysis of size-dependent shear deformable functionally graded cylindrical shell on the basis of modified couple stress theory

Yaghoub Tadi Beni et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Engineering, Mechanical

A novel microstructure-dependent shear deformable beam model

Bekir Akgoz et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

Add to Collection

Article Mechanics

A microstructure-dependent sinusoidal plate model based on the strain gradient elasticity theory

Bekir Akgoz et al.

ACTA MECHANICA (2015)

Add to Collection

Article Mechanics

Thermo-electro-mechanical vibration of size-dependent piezoelectric cylindrical nanoshells under various boundary conditions

L. L. Ke et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Engineering, Multidisciplinary

Thermo-mechanical buckling behavior of functionally graded microbeams embedded in elastic medium

Bekir Akgoz et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2014)

Add to Collection

Article Mechanics

Size-dependent axial buckling analysis of functionally graded circular cylindrical microshells based on the modified strain gradient elasticity theory

R. Gholami et al.

MECCANICA (2014)

Add to Collection

Article Mechanics

Thermo-electro-mechanical vibration of piezoelectric nanoplates based on the nonlocal theory

Chen Liu et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Mechanics

Static analysis for functionally graded piezoelectric actuators or sensors under a combined electro-thermal load

H. J. Xiang et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)

Add to Collection

Article Mechanics

Three-dimensional exact analysis of a simply supported functionally gradient piezoelectric plate

Z Zhong et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Experiments and theory in strain gradient elasticity

DCC Lam et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2003)

Add to Collection

Article Mechanics

A high order theory for functionally graded piezoelectric shells

XH Wu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2002)

Add to Collection

Article Mechanics

Couple stress based strain gradient theory for elasticity

F Yang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.