Related references
Note: Only part of the references are listed.Effect of Cd micro-addition on microstructure and mechanical properties in ternary Al-Si-Cu alloy
Yudong Cao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
A novel strategy for hierarchical structure in multicomponent nano-precipitated steels by high magnetic field aging
Nianshuang Qiu et al.
SCRIPTA MATERIALIA (2021)
Distribution of transition metal elements in an Al-Si-Cu-based alloy
Qianying Shi et al.
SCRIPTA MATERIALIA (2021)
Coupled segregation mechanisms of Sc, Zr and Mn at θ′ interfaces enhances the strength and thermal stability of Al-Cu alloys
Lu Jiang et al.
ACTA MATERIALIA (2021)
Creep Behaviors of Two Near-Eutectic Al-Si-Cu-Mn Heat-Resistant Alloys Containing Dendritic Mn-Rich Primary Phase or Modified Star-Like Cr-Mn-Rich Primary Phase
Soban Muddassir Dar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
High-pressure strengthening in ultrafine-grained metals
Xiaoling Zhou et al.
NATURE (2020)
The effect of ultrasonic melt treatment on solid solution treatment temperature and/or time for an Al-7Si-2Cu-1Mg alloy
Soo-Bae Kim et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2020)
Nanostructural Sc-based hierarchy to improve the creep resistance of Al-Cu alloys
Chong Yang et al.
MATERIALS & DESIGN (2020)
Solidification of Al-xCu alloy under high pressures
X. Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effects of Zn on Microstructure Modification and Mechanical Properties Improvement of Al-Si-Cu-Mg Alloys
L-K Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Effect of cooling rate on eutectic Si in Al-7.0Si-0.3Mg alloys modified by La additions
Longfei Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effects of prior deformation on precipitation behavior and mechanical properties of super-ferritic stainless steel
Hui-Hu Lu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Solute-vacancy clustering in aluminum
Jian Peng et al.
ACTA MATERIALIA (2020)
The effect of pressure-induced Mg64Zn15Y21 phase on the mechanical properties of Mg-Zn-Y alloy
Wei Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Role of intersecting grain boundary on the deformation of twin-twin intersection
Shuchun Zhao et al.
SCRIPTA MATERIALIA (2020)
Pressure Induced Nanoparticle Phase Behavior, Property, and Applications
Feng Bai et al.
CHEMICAL REVIEWS (2019)
Unprecedented strength in pure iron via high-pressure induced nanotwinned martensite
Hongwang Zhang et al.
MATERIALS RESEARCH LETTERS (2019)
Lattice distortion-induced sluggish phase transition in CoCrFeNixAl1-x (x =0.5, 0.75) high-entropy alloys at high pressures
Lei Liu et al.
HIGH PRESSURE RESEARCH (2019)
Influence of plastic deformation and Cu/Mg ratio on the strengthening mechanisms and precipitation behavior of AA2024 aluminum alloys
J. L. Garcia-Hernandez et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
The effects of high pressure and superheating on the planar growth of Al3Ni phase in hypo-peritectic Al-30wt%Ni alloy
X. H. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of pre-deformation on precipitation behaviors and properties in Cu-Ni-Si-Cr alloy
Yake Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Combined Effects of Ultrasonic Melt Treatment and Cu/Mg Solute on the Microstructure and Mechanical Properties of a Hypoeutectic Al-7Si Alloy
Soo-Bae Kim et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Co-stabilization of θ′-Al2Cu and Al3Sc precipitates in Sc-microalloyed Al-Cu alloy with enhanced creep resistance
Y. H. Gao et al.
MATERIALS TODAY NANO (2019)
The formation of bulk β-Al3Ni phase in eutectic Al-5.69wt%Ni alloy solidified under high pressure
X. H. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
A. Rodriguez-Veiga et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Solidification behavior, microstructure and silicon twinning of Al-10Si alloys with ytterbium addition
Zhi Hu et al.
JOURNAL OF RARE EARTHS (2018)
The influence of Sc solute partitioning on ductile fracture of Sc-microalloyed Al-Cu alloys
C. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Remarkable enhancement in precipitation hardening of Al7Si1.7Cu alloy by high pressure solution treatment
Maowen Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure
P. Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Dispersoid particles precipitated during the solutionizing course of Al-12 wt %Si-4 wt%Cu-1.2 wt%Mn alloy and their influence on high temperature strength
Hengcheng Liao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Achieving High Strength and Ductility in Magnesium Alloys via Densely Hierarchical Double Contraction Nanotwins
Hui Fu et al.
NANO LETTERS (2017)
Materials discovery at high pressures
Lijun Zhang et al.
NATURE REVIEWS MATERIALS (2017)
Solute segregation at the Al/θ′-Al2Cu interface in Al-Cu alloys
Dongwon Shin et al.
ACTA MATERIALIA (2017)
The enhanced theta-prime (θ′) precipitation in an Al-Cu alloy with trace Au additions
Yiqiang Chen et al.
ACTA MATERIALIA (2017)
The influence of Sc solute partitioning on the microalloying effect and mechanical properties of Al-Cu alloys with minor Sc addition
C. Yang et al.
ACTA MATERIALIA (2016)
Plastic deformation and dissolution of ε-Cu particles by cold rolling in an over-aged particle dispersion strengthening Fe-2mass%Cu alloy
Toshihiro Tsuchiyama et al.
ACTA MATERIALIA (2016)
Twinning interactions induced amorphisation in ultrafine silicon grains
Y. Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Ageing characteristics and high-temperature tensile properties of Al-Si-Cu-Mg alloys with micro-additions of Cr, Ti, V and Zr
S. K. Shaha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Cluster formation at the Si/liquid interface in Sr and Na modified Al-Si alloys
Jenifer Barrirero et al.
SCRIPTA MATERIALIA (2016)
Pre-nucleation clusters mediated crystallization in Al-Si melts
Yue Liu et al.
SCRIPTA MATERIALIA (2016)
Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al-12.7%Si alloys investigated by SEM/EBSD
Xiaorui Liu et al.
ACTA MATERIALIA (2015)
Solute adsorption and entrapment during eutectic Si growth in A-Si-based alloys
J. H. Li et al.
ACTA MATERIALIA (2015)
Modification of eutectic Si in Al-Si alloys with Eu addition
J. H. Li et al.
ACTA MATERIALIA (2015)
Modeling of eutectic spacing in binary alloy under high pressure solidification
W. Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of alternating magnetic field aged on microstructure and mechanical properties of AA2219 aluminum alloy
Y. Z. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
High pressure aging synthesis of a hexagonal Mg2Sn strengthening precipitate in Mg-Sn alloys
Hui Fu et al.
MATERIALS LETTERS (2015)
Refinement of Eutectic Si in High Purity Al-5Si Alloys with Combined Ca and P Additions
Thomas Hartmut Ludwig et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Cluster-assisted nucleation of silicon phase in hypoeutectic Al-Si alloy with further inoculation
Yong Zhang et al.
ACTA MATERIALIA (2014)
Effects of high pressure and SiC content on microstructure and precipitation kinetics of Al-20Si alloy
P. Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The effects of quench rate and pre-deformation on precipitation hardening in Al-Mg-Si alloys with different Cu amounts
Takeshi Saito et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
High-pressure synthesis of a nanoscale YB12 strengthening precipitate in Mg-Y alloys
Hui Fu et al.
SCRIPTA MATERIALIA (2014)
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Y. Estrin et al.
ACTA MATERIALIA (2013)
Effect of pressure on aging of the Al4wt% Cu alloy
Arkadiy Dobromyslov et al.
HIGH PRESSURE RESEARCH (2013)
Influence of indirect ultrasonic vibration on the microstructure and mechanical behavior of Al-Si-Cu alloy
H. Puga et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Twin intersection mechanisms in nanocrystalline fcc metals
F. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effect of simultaneous deformation and annealing on the precipitation behaviour and mechanical properties of an Al-Mg-Si alloy
Katharina Teichmann et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions
J. H. Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
The Effects of Low Cu Additions and Predeformation on the Precipitation in a 6060 Al-Mg-Si Alloy
Takeshi Saito et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Silver segregation to θ′ (Al2Cu)-Al interfaces in Al-Cu-Ag alloys
Julian M. Rosalie et al.
ACTA MATERIALIA (2012)
The magic thicknesses of θ′ precipitates in Sn-microalloyed Al-Cu
Laure Bourgeois et al.
ACTA MATERIALIA (2012)
Effect of pressure on solidification of metallic materials
J. J. Sobczak et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2012)
Identification of high temperature precipitation reactions in 2024 Al-Cu-Mg alloy through ultrasonic parameters
S. Muthu Kumaran
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Reprecipitation behavior in Al-Cu binary alloy after severe plastic deformation-induced dissolution of θ′ particles
Wenjie Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys
Z. Asghar et al.
ACTA MATERIALIA (2011)
Precipitates in Al-Cu alloys revisited: Atom-probe tomographic experiments and first-principles calculations of compositional evolution and interfacial segregation
Aniruddha Biswas et al.
ACTA MATERIALIA (2011)
Microstructural characteristics of Hadfield steel solidified under high pressure
Yuzi Zhang et al.
HIGH PRESSURE RESEARCH (2011)
Enhancement of mechanical properties of Al-Mg alloy with a high Mg content solidified under high pressures
J. C. Jie et al.
SCRIPTA MATERIALIA (2011)
Microstructure evolution and precipitation of Al-12Mg alloy solidified under high pressure
J. C. Jie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Microstructure evolution of Al-Mg alloy during solidification under high pressure
Jinchuan Jie et al.
MATERIALS LETTERS (2010)
Enhanced grain refinement due to deformation-induced precipitation during ambient-temperature severe plastic deformation of an Al-7%Si alloy
J. M. Garcia-Infanta et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Evolution of microstructures and phases of Al-Mg alloy under 4 GPa high pressure
Z. J. Wei et al.
JOURNAL OF MATERIALS SCIENCE (2007)
High-pressure synthesized materials: treasures and hints
V. V. Brazhkin
HIGH PRESSURE RESEARCH (2007)
Determination of strontium segregation in modified hypoeutectic Al-Si alloy by micro X-ray fluorescence analysis
K. Nogita et al.
SCRIPTA MATERIALIA (2006)
Strain-compensated nano-clusters in Al-Si-Ge alloys
V Radmilovic et al.
SCRIPTA MATERIALIA (2006)
Effect of Zr addition on the aging behavior of A319 aluminum cast alloy
P Sepehrband et al.
SCRIPTA MATERIALIA (2005)