Related references
Note: Only part of the references are listed.Using high-pressure torsion to fabricate an Al-Ti hybrid system with exceptional mechanical properties
Aleksandra Bartkowska et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Instability of a molybdenum layer under deformation of a CuMoCu laminate by high-pressure torsion
V. Tavakkoli et al.
MATERIALS LETTERS (2021)
Quantifying solid-state mechanical mixing by high-pressure torsion
Yan Beygelzimer et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Synthesis of Hybrid Nanocrystalline Alloys by Mechanical Bonding through High-Pressure Torsion
Jae-Kyung Han et al.
ADVANCED ENGINEERING MATERIALS (2020)
Effect of post-deformation annealing on the microstructure and micro-mechanical behavior of Zn-Mg hybrids processed by High-Pressure Torsion
David Hernandez-Escobar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Fabrication and characterization of nanostructured immiscible Cu-Ta alloys processed by high-pressure torsion
Tayebeh Mousavi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
The fabrication of high strength Zr/Nb nanocomposites using high-pressure torsion
Dan Luo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Ductility and strain hardening in gradient and lamellar structured materials
Xiaolei Wu et al.
SCRIPTA MATERIALIA (2020)
Superior strength of tri-layered Al-Cu-Al nano-composites processed by high-pressure torsion
Piotr Bazarnik et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
An approach for fabrication of Al-Cu composite by high pressure torsion
V. N. Danilenko et al.
MATERIALS LETTERS (2019)
Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC
D. Rahmatabadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Bulk-State Reactions and Improving the Mechanical Properties of Metals through High-Pressure Torsion
Jae-Kyung Han et al.
MATERIALS TRANSACTIONS (2019)
Benefits of pattern formation by severe plastic deformation
R. Kulagin et al.
APPLIED MATERIALS TODAY (2019)
A magnesium-aluminium composite produced by high-pressure torsion
Moara M. Castro et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Intermetallic growth kinetics and microstructure evolution in Al-Cu-Al metal-matrix composite processed by high pressure torsion
G. F. Korznikova et al.
MATERIALS LETTERS (2019)
High thermally stable multi-layer steel/vanadium alloy hybrid material obtained by high-pressure torsion
S. O. Rogachev et al.
MATERIALS LETTERS (2019)
The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion
Yi Huang et al.
ACTA MATERIALIA (2019)
Fabrication of nanocomposites through diffusion bonding under high-pressure torsion
Megumi Kawasaki et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Instabilities of interfaces between dissimilar metals induced by high pressure torsion
R. Kulagin et al.
MATERIALS LETTERS (2018)
An investigation of the limits of grain refinement after processing by a combination of severe plastic deformation techniques: A comparison of Al and Mg alloys
Shima Sabbaghianrad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion
P. Bazarnik et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Direct Bonding of Aluminum-Copper Metals through High-Pressure Torsion Processing
Jae-Kyung Han et al.
ADVANCED ENGINEERING MATERIALS (2018)
Plastic flow and microstructural instabilities during high-pressure torsion of Cu/ZnO composites
Yuanshen Qi et al.
MATERIALS CHARACTERIZATION (2018)
Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by High-Pressure Torsion
David Hernández-Escobar et al.
PHILOSOPHICAL MAGAZINE (2018)
Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion
Karoline Sophie Kormout et al.
ADVANCED ENGINEERING MATERIALS (2017)
Using Severe Plastic Deformation to Fabricate Strong Metal Matrix Composites
Megumi Kawasaki et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
Micro-mechanical and tribological properties of aluminum-magnesium nanocomposites processed by high-pressure torsion
Jae-Kyung Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads
Dagmara Malgorzata Fronczek et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Micro-Mechanical Behavior of an Exceptionally Strong Metal Matrix Nanocomposite Processed by High-Pressure Torsion
Byungmin Ahn et al.
ADVANCED ENGINEERING MATERIALS (2016)
Effect of high pressure torsion on microstructure of Cu-Sn alloys with different content of Hume Rothery phase
A. Korneva et al.
MATERIALS CHARACTERIZATION (2016)
Grain refinement of intermetallic compounds in the Cu-Sn system under high pressure torsion
A. Korneva et al.
MATERIALS LETTERS (2016)
Evolution of the structure and strength of steel/vanadium alloy/steel hybrid material during severe plastic deformation
S. O. Rogachev et al.
MATERIALS LETTERS (2016)
Mechanical and microstructural characteristics of Ti6Al4V/AA2519 and Ti6Al4V/AA1050/AA2519 laminates manufactured by explosive welding
P. Bazarnik et al.
MATERIALS & DESIGN (2016)
An evaluation of the saturation hardness in an ultrafine-grained aluminum 7075 alloy processed using different techniques
Shima Sabbaghianrad et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature
Byungmin Ahn et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Different models of hardness evolution in ultrafine-grained materials processed by high-pressure torsion
Megumi Kawasaki
JOURNAL OF MATERIALS SCIENCE (2014)
A critical evaluation of the processing of an aluminum 7075 alloy using a combination of ECAP and HPT
Shima Sabbaghianrad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Extraordinary strain hardening by gradient structure
XiaoLei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Making strong nanomaterials ductile with gradients
K. Lu
SCIENCE (2014)
Synergetic Strengthening by Gradient Structure
X. L. Wu et al.
MATERIALS RESEARCH LETTERS (2014)
Evolution of hardness in ultrafine-grained metals processed by high-pressure torsion
Megumi Kawasaki et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2014)
High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum-copper system
Keiichiro Oh-ishi et al.
ACTA MATERIALIA (2013)
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
Terence G. Langdon
ACTA MATERIALIA (2013)
Architecturing of Metal-Based Composites with Concurrent Nanostructuring: A New Paradigm of Materials Design
Olivier Bouaziz et al.
ADVANCED ENGINEERING MATERIALS (2013)
Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion
Roberto B. Figueiredo et al.
ACTA MATERIALIA (2012)
Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion
Aicha Loucif et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Nanostructuring Nb by various techniques of severe plastic deformation
V. V. Popov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
In situ production of bulk intermetallic-based nanocomposites and nanostructured intermetallics by high-pressure torsion
Kaveh Edalati et al.
SCRIPTA MATERIALIA (2012)
Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins
Kaveh Edalati et al.
SCRIPTA MATERIALIA (2012)
An investigation of hardness homogeneity throughout disks processed by high-pressure torsion
Megumi Kawasaki et al.
ACTA MATERIALIA (2011)
Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion
Tatsuya Miyazaki et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Effects of the anion in glycine-containing electrolytes on the mechanical properties of electrodeposited Co-Ni films
E. Pellicer et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
The development of hardness homogeneity in pure aluminum and aluminum alloy disks processed by high-pressure torsion
Megumi Kawasaki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
T. H. Fang et al.
SCIENCE (2011)
Significance of strain reversals in a two-phase alloy processed by high-pressure torsion
Megumi Kawasaki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
The evolution of homogeneity in processing by high-pressure torsion
Cheng Xu et al.
ACTA MATERIALIA (2007)
Microstructural evolution and deformation of cryomilled nanocrystalline Al-Ti-Cu alloy
Z Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour
A Leyland et al.
WEAR (2000)
Share Paper
