Related references
Note: Only part of the references are listed.Bead-on-Plate Underwater Wet Welding on S700MC Steel
Jacek Tomkow et al.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2021)
Fatigue strength assessment of ground fillet-welded joints using 4R method
Antti Ahola et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Effect of Gas Pressure on the Formation Mechanism of Welds Based on Local Dry Underwater Welding
Leigang Han et al.
ISIJ INTERNATIONAL (2021)
Guidance for Material Selection Based on Static and Dynamic Mechanical Properties at Sub-Zero Temperatures
Moritz Braun et al.
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME (2021)
Weldability of Underwater Wet-Welded HSLA Steel: Effects of Electrode Hydrophobic Coatings
Jacek Tomkow
MATERIALS (2021)
MAG Welding Process with Micro-Jet Cooling as the Effective Method for Manufacturing Joints for S700MC Steel
Tomasz Wegrzyn et al.
METALS (2021)
A review of fatigue test data on weld toe grinding and weld profiling
Moritz Braun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Underwater Laser Welding of Pure Ti: Oxidation and Hardening Behaviors
Manlelan Luo et al.
METALS (2021)
Effect of post-weld heat treatment and dissimilar filler metal composition on the microstructural developments, and mechanical properties of gas tungsten arc welded joint of P91 steel
Sanjeev Kumar et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)
Effect of water flow and depth on fatigue crack growth rate of underwater wet welded low carbon steel SS400
E. Surojo et al.
OPEN ENGINEERING (2021)
Effect of the t8/5 Cooling Time on the Properties of S960MC Steel in the HAZ of Welded Joints Evaluated by Thermal Physical Simulation
Milos Mician et al.
METALS (2020)
Underwater In Situ Local Heat Treatment by Additional Stitches for Improving the Weldability of Steel
Jacek Tomkow et al.
APPLIED SCIENCES-BASEL (2020)
Assessment of grinding weld treatment methods using effective notch stresses
B. J. Mecseri et al.
WELDING IN THE WORLD (2020)
Investigating the Advantages of Ultrasonic-assisted Welding Technique Applied in Underwater Wet Welding by in-situ X-ray Imaging Method
Hao Chen et al.
MATERIALS (2020)
Weld morphology and mechanical performance of marine structural steel welded underwater in a real marine environment
Zahit Colak et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Dissimilar underwater wet welding of HSLA steels
Jacek Tomkow et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Internal characteristic of droplet and its influence on the underwater wet welding process stability
Changsheng Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Effect of adding yttrium on precipitation behaviors of inclusions in E690 ultra high strength offshore platform steel
Xiaojun Xi et al.
HIGH TEMPERATURE MATERIALS AND PROCESSES (2020)
Hydrogen-assisted cracking in GMA welding of high-strength structural steels using the modified spray arc process
Thomas Schaupp et al.
WELDING IN THE WORLD (2020)
Effect of Electrode Waterproof Coating on Quality of Underwater Wet Welded Joints
Jacek Tomkow et al.
MATERIALS (2020)
Influence of Heat Input on Microstructure and Corrosion Resistance of Underwater Wet-Welded E40 Steel Joints
Jianfeng Wang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Flux cored arc welding of 304L stainless steel within glycerol environment
Xin Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Underwater Pulse-Current FCAW Part 2: Bubble Behaviors and Waveform Optimization
J. Wu et al.
WELDING JOURNAL (2020)
Underwater Local Cavity Welding of S460N Steel
Jacek Tomkow et al.
MATERIALS (2020)
INFLUENCE OF STICK ELECTRODE COATING'S MOISTURE CONTENT ON THE DIFFUSIBLE HYDROGEN IN UNDERWATER WET SHIELDED METAL ARC WELDING
J. Klett et al.
ADVANCES IN MATERIALS SCIENCE (2020)
WELDING THERMAL CYCLES OF JOINTS MADE OF S1100QL STEEL BY SAW AND HYBRID PLASMA-MAG PROCESSES
A. Sajek
ADVANCES IN MATERIALS SCIENCE (2020)
MICROSTRUCTURE EVOLUTION AND MECHANICAL PROPERTIES OF UNDERWATER DRY WELDED METAL OF HIGH STRENGTH STEEL Q690E UNDER DIFFERENT WATER DEPTHS
Kun Sun et al.
POLISH MARITIME RESEARCH (2020)
Metallurgical Model of Diffusible Hydrogen and Non-Metallic Slag Inclusions in Underwater Wet Welding of High-Strength Steel
Sergey G. Parshin et al.
METALS (2020)
The Effect of Polarity and Hydrostatic Pressure on Operational Characteristics of Rutile Electrode in Underwater Welding
Andres M. Moreno-Uribe et al.
MATERIALS (2020)
Effect of the water depth on the hydrogen content in SMAW wet welded joints
Jan Klett et al.
SN APPLIED SCIENCES (2020)
Comparison of underwater wet welding performed with silicate and polymer agglomerated electrodes
Pedro Henrique Ribeiro Menezes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of the welding environment and storage time of electrodes on the diffusible hydrogen content in deposited metal
Jacek Tomkow et al.
REVISTA DE METALURGIA (2019)
Arc stability indexes evaluation of ultrasonic wave-assisted underwater FCAW using electrical signal analysis
Jianfeng Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Characteristics of multi-pass narrow-gap laser welding of D406A ultra-high strength steel
Jie Ning et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effects of heat input on microstructure and fracture toughness of simulated coarse-grained heat affected zone for HSLA steels
Xiaocong Yang et al.
MATERIALS CHARACTERIZATION (2019)
Effects of heat input on the mechanical properties of butt-welded high and ultra-high strength steels
Mohsen Aniraei et al.
ENGINEERING STRUCTURES (2019)
Dry hyperbaric welding of HSLA steel up to 35 bar ambient pressure with CMT arc mode
Ivan Bunaziv et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Crack Initiation and Propagation Fatigue Life of Ultra High-Strength Steel Butt Joints
Markus J. Ottersboeck et al.
APPLIED SCIENCES-BASEL (2019)
Effect of weld toe geometry on fatigue life of lap fillet welded ultra-high strength steel joints
Tsuyoshi Shiozaki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Analysis of hydrogen diffusion and trapping in ultra-high strength steel grades
Tobias Schaffner et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Underwater local dry cavity laser welding of 304 stainless steel
Ning Guo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Improvement of S355G10+N steel weldability in water environment by Temper Bead Welding
J. Tomkow et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
The influence of process parameters in friction stir welding of Al-Mg alloy and polycarbonate
Hamed Aghajani Derazkola et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Use of HSS and VHSS in steel structures in civil and offshore engineering Requirements regarding material properties
Sjors van Es et al.
STEEL CONSTRUCTION-DESIGN AND RESEARCH (2018)
Thermographic Assessment of the HAZ Properties and Structure of Thermomechanically Treated Steel
Jacek Gorka et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2017)
EFFECT OF WELDING THERMAL CYCLES ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SIMULATED HEAT AFFECTED ZONE FOR A WELDOX 1300 ULTRA-HIGH STRENGTH ALLOY STEEL
M. St. Weglowski et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Elucidating of tool rotational speed in friction stir welding of 7020-T6 aluminum alloy
A. Salemi Golezani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Enhancement of the fatigue strength of underwater wet welds by grinding and ultrasonic impact treatment
Wenbin Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
An experimental study of high-hydrogen welding processes
Dariusz Fydrych et al.
REVISTA DE METALURGIA (2015)
Fatigue strength of welded ultra high strength steels improved by high frequency hammer peening
Joern Berg et al.
20TH EUROPEAN CONFERENCE ON FRACTURE (2014)
Physical Simulation of Weldability of Weldox 1300 Steel
Marek Stanislaw Weglowski et al.
PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING VII (2013)
Share Paper
